Corrigendum - Annual Rate Contract For Maintenance Of Fire And Safety Equipment At Group B Srpl Ennore Station-3 9 Kg Dcp Extinguisher 4 2 Kg Clean Agent Extinguisher 5 4.5 Kg Co2 Extinguisher 6 Refilling Of Co2 Gas In Cartidges For Using In 10Kg / 9 Kg Dcp Extinguishers Including All & Labour, Transportation Etc.. Complete As Per Specification And Direction Of Eic / Site-Engineer. ( Co2 Cartridge Of 200 Gms ) 7 Service Assistance In Hydrostatic Testing, Inspection Of Safety Valve, And Refilling Of High Pressure Cylinder Through Cce Approved Party And Charging Upto Required Pressure Including Taking Delivery Of The Cylinder From The Station And Returning The Same Inclusive Of All Labour Material, Transportation And All The Other Incidental Expenses. The Cylinder Is To Be Returned Back To The Station Within 15 Days From The Date Of Receiving From The Station And Submission Of Reports And Test Certificates For Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl ) 8 2 Kg Clean Agent Extinguisher 9 4.5 Kg Co2 Extinguisher 10 Hydrostatic Testing Of 9 Kg Dcp Through Cce Approved Party Taking Delivery Of The Cylinder From The Station And Returning The Same Inclusive Of All Labour Material, Transportation And All The Other Incidental Expenses. The Cylinder Is To Be Returned Back To The Station Within 15 Days From The Date Of Receiving From The Station 11 Hydrostatic Testing Of Fire Hoses At 9 K 12 Service Assistance In Hydrotesting And Refilling Of Breathing Apparatus Set Cylinder From Cce Approved Vendor & Filling With Dry Compressed Air Up To A Pressure Of 200 / 300 Bar As Per Direction Of Eic, Inclusive Of Transportation, Handling Charges Complete In All Respect.Cylinders To Be Brought Back To Pump Station In 20 Days From Date Of Despatch / Handing Over Submission Of Reports And Test Certificates For Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl ) 13 Hydrotest Of Breathing Apparatus 14 Refilling As Per The Statutory Norms 15 Checking Of Heat And Smoke Detectors / Multi Sensor Detectors Installed In Control Building, Mcc Rooms, Cable Trenches ( Using Heat Gun And Aerosol Supplied By Owner ) In Each Quarter Inclusive Of Labours Tools Tackles. 16 Service Assistance In Carrying Out Surface Preparation By Hand Tool Cleaning Confirming To St 2 Standard And Painting Extinguishers / Hydrants With One Coat Of Red Oxide Primer & Two Coats Of Fire Red Synthetic Enamel Paint, Hose Boxes, Monitor And Hydrant Outlets Shall Be Painted With Two Coats Of Luminous Yellow Synthetic Enamel Instead Of Fire Red, Including All Consumables, Tools, Tackles Etc. Before Painting Oldstickers To Be Removed & Surface Preparation To Be Done By Contractor. After Painting, Stickers To Be Pasted Back And Numbers And / Or Letters To Be Re-Written By The Contractor For Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl ) 17 2 Kg Clean Agent Fire Extinguisher 18 4.5 Kg Co2 Extinguisher 19 9 Kg Dcp Extinguisher 20 Painting Of Sand Buckets Including Stand 21 Supply Items 22 Supply Of Spares Of Fire Fighting Equipments At Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl As Per Requirement Or As Directed By Eic 23 Discharge Hose Without Squeeze Grip Nozzle, Hose Should Not Burst Or Show Leakage Before 50Kgf / Cm2 24 Safety Clip ( Metal ) With Nylon Thread 25 Dcp Extinguisher Cap Washer 26 Discharge Tube Washer 27 Spares For Co2 Extinguishers With Test Certificates At Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl As Per Requirement Or As Directed By Eic, , 28 Hdpe Discharge Horn For 4.5 Kg Capacity Co2 Extinguisher With Fittings 29 High Pressure Discharge Hose For 4.5 Kg Co2 Extinguisher With Fittings 30 Co2 Valve Open Wheel 31 Safety Pin With Nylon String For Co2 Ext 32 Supply & Fitting Of Glass Of Manual Call Points Wherever Required Complete In All Respect Inclusive Of Material, Labour, Consumables Etc 33 Supply Of Hammer For Breaking Glass Of Manual Call Points / Hose Boxes / Emergency Tool Box 34 Fixing Up Of Clamps Of Extinguisher In Wall Including Supply Of Clamps, Screws Etc And Drilling, Fitting Extinguisher To Complete The Work In All Respect As Per Direction Of Eic / Site Engineer 35 Supply & Fitting Of Clamps For Hanging 2Kg & 4.5Kg Co2 Extinguisher On & Wall Including Labour Charges, Tools Tackles &Consumables Complete In All Respect As Per Direction Of Eic. 36 Supply & Fitting Of New Wind Sock ( 0.9M Dia & 1.8Mtr Length ) Made Out Of Synthetic Cloth In Flood Light Tower , Buildings, As Per Direction Of Site Engineer / Eic 37 Supply Of Multi Sensor Detector Along With All Mounting And Other Aceesories As Per Tender Specification
