Tender For Various Electrical Work At Karni Singh Stadium , Bikaner, Bikaner-Rajasthan

Tender For Various Electrical Work At Karni Singh Stadium , Bikaner:-1 Supply And Erection Of M S Swaged Tubular Pole 2 9.0 Mtr. ( 410 Sp - 28 ) 3 Supply, Erection And Fixing Of Hot Dipped Galvanised Overhang ( 48.3 X 3.25 Mm ) With Cap ( 400 X 88.9 / 114.3 X 3.25 Mm ) Over The Existing Poles 4 Single Arm Overhang 5 Double Arm Overhang 6 P & F Of Ip-65 Protected High Power , Led Flood Light System With Pressure Dliecast Aluminium Housing , Toughened 3Lass Diffuser With Suitable Lenses On Led To Achieve Various Beam Angles, Z4o Volt, 50H2, Of High Power Led [ Ixture Supplied With Pre Wired Cable Of 1 Mtr. Integrated Driver Shall Be High Efficiency Having Efficiency More Than 85 O / O And In Compliance To Iec Standards / Bis Certified. The System Level Luminaire Efficacy >=100 With High Power Leds Of Cre E / N I Ch Ialo S Ram / Ph I Li Ps / Se Oul Make Is To Be Used . Led Driver Input Voltage Ac L10 To 270 V Ac With Auto Resetting Safery Cut-Off. Input Frequency 50Hzt 3O / O Power Factor >0.95 Driver Efficiency >850 / O , Control Gear Integral Design, Thd [ L ) <T00 / O Electrical Connector Must Be Provided Surge Protection Min >=5Kv Internal And 10Kv External In Bow Onwards, Humidiry T O / O To 900 / O Rh Working Temp -Ztc To 50C Led Luminaire Specifications: Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 700 / O Lumen Maintenance.Manufactures Word Mark / Name Engraved / Embossed On Die Cast Housing To Allow Traceability / Authenticity Till Life Of Fixture. Fixtures Shall Be Ce Complianed 7 High Power Led Flood Light 160W 8 High Power Led Flood Light 240W 9 P / Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Cable Of 1.1 Kv Grade With Aluminium Conductor Of Is:1554 P-I / Is :7098 P - I Of Group 1 Of Approved Make In Ground As Per Is:1255 Including Excavation Of 30Cmx75cm Size Trench, 25 Cm Thick Under Layer Of Sand, Iind Class Bricks Covering, Refilling Earth, Compaction Of Earth, Making Necessary Connection, Testing Etc. As Required Of Size. 10 10.0 Sq.Mm 11 4 Core 12 50.0 Sq.Mm 13 3.5 Core 14 P / Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Cable Of 1.1 Kv Grade With Copper Conductor Of Is:1554 P-I / Is :7098 P - I Of Group 1 Of Approved Make In Ground As Per Is:1255 Including Excavation Of 30Cmx75cm Size Trench, 25 Cm Thick Under Layer Of Sand, Iind Class Bricks Covering, Refilling Earth, Compaction Of Earth, Making Necessary Connection, Testing Etc. As Required Of Size. 15 2.5 Sq.Mm 16 4 Core 17 Maintenance Free Gel Earthing With Pipe In Pipe / Pipe In Strip Technology Filled With Anti Corrosive Conductive Compound ( Cpri Tested ) Below The Ground In 150 - 200 Mm Dia. Earth Pit & Surrounding Filled With Required Mineral Filling Compound ( Mfc Should Have Hygroscopic Property To Retain The Moisture For Long Time To Create Low Resistance Zone ) And C.C. Finished Chamber Covered With Hinged Type With Locking Arrangement C.I. Cover, C.I. Frame Of Size 300Mm X 300Mm Complete Testing Of Earth Resistance As Required. Of Following Sizes. 18 With Pipe In Pipe Technology ( Inner Pipe Dia. / Outer Pipe Dia. ) 80 - 100 Micron Gi Coating 19 Gi Pipe 2000 Mm Long, 50 / 25Mm, Terminal 12 Mm Gi Strip 20 S & Laying Following Size Earth Wire / Strip In Horizontal Or Vertical Run In Ground / Surface / Recess Including Riveting, Soldering, Saddles, Making Connection Etc. As Required. 21 8 Swg G.I. ( Hot Dipped ) Wire 22 20Mm X 3Mm G.I. ( Hot Dipped ) Strip 23 P&F 240 / 415 V Ac Mcb With Positive Isolation Of Breaking Capacity Not Less Than 10 Ka ( B / C / D Tripping Characteristic ) Isi Marked Is 8828 ( 1996 ) ] / Conforming To Iec 60898 In Existing Board / Sheets Including Making Connections, Testing Etc. As Required. 24 Single Pole Mcb 25 6 A To 32 A Rating 26 Four Pole Mcb 27 40 A 63 A Rating 28 P / Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To Is:694 With Flexible Copper Conductor Including Making Connection Etc. As Required. 29 1.5 Sq.Mm 3 Core Flat / Round 30 Sitc Of High Mast Lighting System 31 16.0 Mtr Hm ( In 2 Section ) Gr.2 32 Providing And Fixing Of Ip 65 Protectd Polycarbonate / Polysterene Fuse Box Moulded With Inside Knock Outs Of Following Size With Hinged Cover, Transparent Window, Pu Gasket, Locking Arrangement, Duly Holded With 2 Nos. Pole Clamps Of 20 Mm X 3 Mm Flat With Nut And Bolts, Complete With The Box Shall Be Provided With Din Rail, 4 / 8 Way 10.0 / 16.0 Sq.Mm Heavy Duty Connector, Earth Terminal, Complete In All Respect. 33 125 Mm X 200 Mm X 122 Mm 34 P&F Recessed / Surface Mounting Heavy Duty Horizontal Type Sheet Steel Distribution Board Phophatised / Powder Painted Complete With Suitable Rating Insulated Copper Bus Bar, Shorting Link , Neutral Link, Earth Link And Din Bar, Masking Sheet, Conforming To Is13032 & Is8623 Including Making Internal Db Terminations With Copper Lugs , Testing Etc. As Required. 35 Double Door ( Three Phase ) 36 4 Way 37 Sitc Of Wall / Free Standing Floor Mounted Dust And Vermin Proof Compartmentalised Cubical Panel Made Out Of Crca Sheet , Required Hardware , Duly Treated For Derusting In 7 Tank Process With Dephosphating And With Powder Coating On Both Side Of Panel In Desired Shade The Panel Having Pu / Neoprene Rubber Gasket Of Not Less Than 3Mm Thickness , Separate Detachable Gland Plate M.S. Base Channel , Hinged Door With Locking Arrangement For Equipment / Switchgear 38 Supplying And Fixing Of Aluminium / Copper Bus Bar By Means Of Smc / Dmc Type Insulator, High Tensile Nuts And Bolts Spring Washers In Existing Panel Including Bending , Cutting In Required Shape And Size And Colour Coding With Heat Shrinkable Pvc Sleeves. 39 Electrolytic Grade Aluminium Bus Bar 40 Sf Of ( 0-500 ) V Range Volt Meter On Existing Panel , Making Connection By Pvc Insulated Copper Conductor With Pvc Sleeves / Channel Etc. As Required. 41 Digital Type 42 Sf Of Ct Operated Direct Reading Type Ampere Meter On Existing Panel , Making Connection By Pvc Insulated Copper Conductor With Pvc Sleeves / Channel Etc. As Required. 43 Digital Type 44 Below 500 A 45 Sf Of Current Transformer , With All Necessary Support In Existing Panel Including Connection Etc. As Required . 46 Up To 150 / 5 Ratio , 5 Va , Class 1 Accuracy 47 Sf Of Selector Switch Of 10 A For Voltmeter ( 4 Position ) Including Making Connection Etc. As Required . 48 Sf Of Ct Linked Selector Switch Of 10 A For Ampere Meter ( 4 Position ) Including Making Connection Etc. As Required . 49 Sf Of 110 / 220 V, Led ( 22.5 Mm Dia ) Indicating Lamp With Integral Circuit, Terminal Block, Including Connection Etc. As Required. 50 Red / Yellow / Green Colour 51 Sitc Of Quick Make And Quick Break 4 Pole Current Limiting Mccb Having Following Current Rating, Short Circuit Breaking Capacity At 440 / 415 V, 50 Hz; O / L & S / C Settings And Conforming To Is 60947-2 / Iec 60947-2 With Front Face And Centralised Adjustable, Line Load Interchangeability, Having Positive Isolation Capability, Provision For Uvr , Shunt Trip , Earth Fault Trip, Push ( Test ) To Trip , Including Making Connections With Lugs & Spreaders, Etc. As Required. 52 With Thermal Magnetic Release 53 Up To 100 Amp , 25 Ka, Adjustable O / L & Fixed S / C Setting, Ics = 100 % Icu 54 250 Amp , 35 Ka, Adjustable O / L & Fixed S / C Setting, Ics = 100 % Icu 55 400 Amp , 35 Ka, Adjustable O / L & Adjustable S / C Setting, Ics = 100 % Icu 56 Supply & Fabrication Steel Structure With Ms Channel / Angle / Joist / Ismb / Sheet Etc. Including Welding, Rivetting, Cutting, Nut & Bolt , Painting Etc. As Required. 57 Earth Work In Excavation / By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5M In Width As Well As 10 Sum On Plan ) Including Disposal Of Excavated Earth, Lead Upto 50 M And Lift Upto 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed: N 58 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. 59 M10 Grade Nominal Mix

INR 500 /-

INR 35940.0 /-

INR 17.97 Lakhs /-

Name of Work :- Various Electrical work at Karni Singh Stadium, Bikaner
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1.01	Supply and erection of M S swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be fabricated by using ISI mark tube for structural purpose of following height & designation. ( See Table E - 09 for specs. )	Item 1	1e-05	nos
2	2	9.0 Mtr. ( 410 SP - 28 )	Item 2	12	Nos.
3	3	Supply, Erection and Fixing of hot dipped galvanised Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles	Item 3	1e-05	nos
4	4	Single arm overhang	Item 4	2	Nos.
5	5	Double arm overhang	Item 5	12	Nos.
6	6	P & F of IP-65 Protected high Power ,LED flood light sYstem with Pressure dliecast aluminium housing , toughened 3lass diffuser with suitable lenses on LED to achieve various beam angles, Z4O volt, 50H2, of high Power LED [ixture supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 o/o and in comPliance to IEC standards/BIS certified. The System level Luminaire efficacy >=100 with High Power LEDs of CRE E/N I CH IAlO S RAM / PH I LI PS/SE OUL make is to be used . LED Driver InPut Voltage AC L10 to 270 V AC with Auto resetting Safery Cut-off. InPut Frequency 50Hzt 3o/o Power Factor >0.95 Driver Efficiency >850/o ,Control Gear Integral Design, THD[l) <t00/o Electrical Connector Must be provided Surge Protection Min >=5KV internal and 10KV external in BOW onwards,Humidiry t\o/o to 900/o RH Working TemP -ZTC to 50C LED Luminaire Specifications: Life Expectancy Equal or more than 50000 burning hrs with Minimum 700/o lumen maintenance.Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianed'	Item 6	1e-05	nos
7	7	High Power LED Flood Light 160W	Item 7	14	Nos.
8	8	High Power LED Flood Light 240W	Item 8	26	Nos.
9	9	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.	Item 9	1e-05	nos
10	10	10.0 Sq.mm	Item 10	1e-05	nos
11	11	4 core	Item 11	670	Mtr.
12	12	50.0 Sq.mm	Item 12	1e-05	nos
13	13	3.5 core	Item 13	400	Mtr.
14	14	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with Copper conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.	Item 14	1e-05	nos
15	15	2.5 Sq.mm	Item 15	1e-05	nos
16	16	4 core	Item 16	35	Mtr.
17	17	Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.	Item 17	1e-05	nos
18	18	With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating	Item 18	1e-05	nos
19	19	GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip	Item 19	10	Set
20	20	S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.	Item 20	1e-05	nos
21	21	8 SWG G.I. ( Hot Dipped ) Wire	Item 21	700	Mtr.
22	22	20mm x 3mm G.I. ( Hot Dipped ) Strip	Item 22	50	Mtr.
23	23	P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.	Item 23	1e-05	nos
24	24	Single pole MCB	Item 24	1e-05	nos
25	25	6 A to 32 A rating	Item 25	48	Nos.
26	26	Four pole MCB	Item 26	1e-05	nos
27	27	40 A 63 A rating	Item 27	5	Nos.
28	28	P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.	Item 28	1e-05	nos
29	29	1.5 Sq.mm 3 core flat / Round	Item 29	500	Mtr.
30	30	SITC of high mast lighting system (as per CP3-TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm, mast head frame assembly with full cover, aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. ( See table E - 13 for specs.)	Item 30	1e-05	nos
31	31	16.0 Mtr HM (in 2 section) Gr.2	Item 31	1	Nos.
32	32	Providing and fixing of IP 65 protectd Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, complete with The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect.	Item 32	1e-05	nos
33	33	125 mm X 200 mm X 122 mm	Item 33	1	Nos.
34	34	P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.	Item 34	1e-05	nos
35	35	Double door (Three phase)	Item 35	1e-05	nos
36	36	4 Way	Item 36	2	Nos.
37	37	SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator). Interconnection between busbar and swithgeard/cable/shall be rigidy supported and made out by flexible copper wires (up to 125 amp) and by solid bus bar(>125amp) all joints/interconnections of copper busbar shall be dully tinned. clearence between main bus bar and risters/metal parts shall be at least 10 mm additional to width of bus bar is insulated by heat shrikable sleeves earth and neutral by heat of the size of phase bus bar.	Item 37	10	Sqmtr
38	38	Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves.	Item 38	1e-05	nos
39	39	Electrolytic grade Aluminium bus bar	Item 39	25	Kg.
40	40	SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.	Item 40	1e-05	nos
41	41	Digital type	Item 41	1	Nos.
42	42	SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.	Item 42	1e-05	nos
43	43	Digital type	Item 43	1e-05	nos
44	44	Below 500 A	Item 44	1	Nos.
45	45	SF of Current Transformer , with all necessary support in existing panel including connection etc. as required .	Item 45	1e-05	nos
46	46	up to 150 / 5 Ratio , 5 VA , class 1 accuracy	Item 46	4	Nos.
47	47	SF of selector switch of 10 A for voltmeter (4 position ) including making connection etc. as required .	Item 47	4	Each
48	48	SF of CT linked selector switch of 10 A for Ampere meter (4 position ) including making connection etc. as required .	Item 49	4	Each
49	49	SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required.	Item 50	1e-05	nos
50	50	Red/yellow/Green colour	Item 51	4	Each
51	51	SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.	Item 52	1e-05	nos
52	52	With Thermal Magnetic release	Item 53	1e-05	nos
53	53	up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu	Item 54	4	Each
54	54	250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu	Item 55	1	Each
55	55	400 Amp ,35 kA, adjustable O/L & adjustable S/C setting, Ics = 100 % Icu	Item 56	1	Each
56	56	Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , Painting etc. as required.	Item 57	30	Kg
57	57	Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed:\n	Item 59	9	Cum
58	58	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.	Item 60	1e-05	nos
59	59	M10 grade Nominal Mix \n1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).	Item 61	6	Cum