| 1 | 1 | Construction of AHU Room at Power House, Surangani. | | | |
|---|
| 2 | 1.01 | Demolition below G.L upto 1.50 metres depth including stacking of serviceable materials and disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating from RCC work | | 0.47 | CUM |
|---|
| 3 | 1.02 | Excavation in earth work and disposal of all excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed: | | 0.8 | CUM |
|---|
| 4 | 1.03 | Providing and laying cement concrete 1:1:2 (1 cement : 1 Sand : 2 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work. Foundation and plinth. | | 1.7 | CUM |
|---|
| 5 | 1.04 | Providing and laying cement concrete 1:1:2 (1 cement : 1 sand :2 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement in reinforced concrete work in: Columns pillars, posts and struts upto floor two level. | | 6.48 | CUM |
|---|
| 6 | 1.05 | Providing and laying cement concrete 1:1:2 (1 cement : 1 sand :2 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement in reinforced concrete work in: Lintels beams, girders, brassumers and cantilevers upto floor two level etc. | | 5.88 | CUM |
|---|
| 7 | 1.061 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Foundation, footings basis of columns etc. and mass concrete. | | 7.95 | SQM |
|---|
| 8 | 1.062 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Columns, pillars, posts and struts Square, rectangular or polygonal in plan. | | 56.96 | SQM |
|---|
| 9 | 1.063 | Extra for every additional height of proping and centring upto a height of 7 metre excluding bricks/stones/C.C. pillars for supports: | | 24.88 | SQM |
|---|
| 10 | 1.064 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor. | | 47.17 | SQM |
|---|
| 11 | 1.065 | Extra for every additional height of proping and centring upto a height of 7 metre excluding bricks/stones/C.C. pillars for supports: | | 23.57 | SQM |
|---|
| 12 | 1.07 | Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level : Tor steel | | 2137.25 | Kg |
|---|
| 13 | 1.08 | Brick work using common burnt clay building bricks: cement mortar 1:4 Super-structure above plinth level upto floor two level (First Class Bricks). | | 31.73 | CUM |
|---|
| 14 | 1.09 | 10 MM thick Cement plaster in single coat on the fair side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand). | | 183.29 | SQM |
|---|
| 15 | 1.1 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand). | | 184.49 | SQM |
|---|
| 16 | 1.11 | Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses :0.63 mm thick sheet | | 128.25 | SQM |
|---|
| 17 | 1.12 | Steel work in built-up tubular(round, square or rectangular hollow tubes, etc.) trusses, etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete: hot finished welded type tubes. | | 1818.7 | Kg |
|---|
| 18 | 1.13 | Providing ridges or hips 60cm overall in plain GI sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. limpet and bitumen washers complete: 0.63mm thick sheet | | 13.5 | MTR |
|---|
| 19 | 1.14 | Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. 2nd class Chil wood | | 0.187 | CUM |
|---|
| 20 | 1.15 | Providing and fixing flush door shutters core of black board construction with frame of first class hard wood and well matched first class Indian teak ply veneering with vertical grains of cross band and face veneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters: 35 mm thick including black enamelled M.S. butt hinges | | 4.327 | SQM |
|---|
| 21 | 1.16 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. | | 2.806 | SQM |
|---|
| 22 | 1.17 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 300x16mm. | | 2 | Each |
|---|
| 23 | 1.18 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125 mm (Standard Make) | | 5 | Each |
|---|
| 24 | 1.19 | Providing and fixing aluminium tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 150x10mm (Standard Make) | | 5 | Each |
|---|
| 25 | 1.2 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting. Ready mixed paint brushing wood primer pink | | 7.133 | SQM |
|---|
| 26 | 1.21 | Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stoping With enamel paint other than white | | 7.133 | SQM |
|---|
| 27 | 1.22 | Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with : Ready mixed primer | | 367.78 | SQM |
|---|
| 28 | 1.23 | Painting two coats(excluding priming coat) on new concrete masonry/plaster surfaces with ready mixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with:- Paint other than white | | 367.78 | SQM |
|---|
| 29 | 1.24 | Applying modrent solution on new G.I sheet for preparation of surface for painting @ 5 litres/100 sqm.of surface and rubbing the solution with brush including thoroughly cleaning the surface of all oil grease dirt and other foreign matter. | | 128.25 | SQM |
|---|
| 30 | 1.25 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brush in to give an even shade including cleaning the surface of all dirt, dust and other foreign matters :- Enamel paint other than white :-- | | 188.09 | SQM |
|---|
| 31 | 1.26 | 40 mm thick cement concrete flooring with 25 mm under layer of cement concrete 1:3:6 (1cement :3 sand :6 stone aggregate of size 12.5 mm and below) and 15 mm weaking layer in cement concrete 1:2 to 3 (1 cement : 2 to 3 stone aggregate of size 4.75 mm and below) laid integral with base course and finished with a floating coat of neat cement | | 86.47 | SQM |
|---|
