Irrigation And Flood Control Department-IFCD has published Providing And Fixing Outdoor Exercise Fitness Equipment ( Open Gym ) In Nilanchal Providing And Fixing Outdoor Exercise Fitness Equipment ( Open Gym ) In NilanchalCghs Plot No . -03 , Sec-04 , Aishwaryum Cghs Plot No . 17 , Sec-04 , Shrirarh Pl. Submission Date for this Tender is 07-10-2019. Fitness Equipment Tenders in Mataila AC Delhi. Bidders can get complete Tender details and download the document.
| Name of Work:- Providing and fixing outdoor exercise fitness equipment (Open Gym) in Nilanchal CGHS Plot No.-03, Sec-04, Aishwaryum CGHS Plot No. 17, Sec-04, ShriRarh Plot No. 32, Sec-04, Rajasva CGHS Plot No. 33, Sec-04, KesarwaniPalam Plot No. 04, Sec-05, Navin Plot No. 07, (6Nos) in MatialaASssembly Constituency-34. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 15m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | BI01010001010000000000000515BI0100001113 | 91 | Cum |
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). | 39 | Cum | |
| 3 | 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). | 50 | Cum | |
| 4 | 4 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. | 135 | Cum | |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). | 101 | Cum | |
| 6 | 6 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-In-Charge: Health Walker The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably.The Foot rest and Base plate covers are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)1064×520×1250mm . Capacity 1 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 7 | 7 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-In-Charge: SIT UP The products must tested and certified to meet EN16630 safety standards with GS test mark.The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. The Seat and Base plate cover are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1480×1200×630mm . Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 8 | 8 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge: SELF WEIGHTED ROWER The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1260×800×920mm. Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 9 | 9 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam FitnessMake or any other make as approved by Engineer-In-Charge:Rider The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. The Seat and Base plate cover is manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1263×558×1267mm . Capacity 1 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 10 | 10 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge: Pulldown Challenger. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 2310×700×1880mm . Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 11 | 11 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge: Squat Pusher. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA PowderCoatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1800×698×1884mm. Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 12 | 12 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge. Arm and pedal bike. The products must tested and certified to meet EN16630 safety standards with GS test mark. All Tubular steel of 2.5mm thickness are galvanized and zinc dipped. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using AKZO Nobel - Great Wall Powder to the thickness of 80 – 120 microns. All metal parts are tested in a 5% NaCL solution in accordance to ISO7227 to speed up corrosion for 3000 hrs. The seat is made from Rotomoulded LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 830 MM x 500 MM x 1450 MM . Capacity 1 person. A cycling and upper arm exercise rolled into one. Co-ordination between leg and arm movement encourages balance whilst exercising too. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines.. | 6 | Each | |
| 13 | 13 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge: TAI CHI spinners. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)1245×1070×1500mm . Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 14 | 14 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge: Seated Chest Press. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Seat, backrest and Base plate cover are manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1800×698×1880mm. Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 15 | 15 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge: BIG SHOULDER WHEEL. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H)870×767×1940mm . Capacity 2 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 16 | 16 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness Make or any other make as approved by Engineer-In-Charge: Elliptical Cross Trainer. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal limiter is fitted inside to prevent the equipment from moving uncontrollably. The Foot restand Base plate covers are manufactured from Virgin LLDPE. Bearings : Maintenance-free ball bearings. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) 1100x550×1510mm . Capacity 1 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines | 6 | Each | |
| 17 | 17 | Supply & fixing of Arihant /Kompon /Landscape /Koochie /Hugo / Grandslam Fitness make or any other make as approved by Engineer-In-Charge:WAIST TWISTER. The products must tested and certified to meet EN16630 safety standards with GS test mark. The structural post of diameter 114mm and 2.5mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. ALL Other external metal components of diameters dia28/32/38/60 and thickness of 2.0mm thickness are hot dipped galvanized and baked varnish with rosin under high temperature. Joints are Robotic Welded. All welded joints are scalloped as necessary and welded to an approved MIG process. All welds are dressed off removing all sharp edges & burrs. Zinc Primer paint is applied at all the welding paints prior to finishing. All metal parts are powder coated using ALESTA - USA Powder Coatings to the thickness of 130 - 180 microns. An internal Limiter is fitted inside to prevent the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. The Base plate cover is manufactured from Virgin LLDPE. Scope of delivery : 1 completely pre-assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Size (L*W * H) Ø1400×1350mm.Capacity 3 persons.All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. | 6 | Each | |
| 18 | 18 | Providing and fixing rubber tile flooring 25mm thick made of SBR(Styrene Butadiene Rubber) with interlocking arrangement and adhesive all complete and size as approved by the Engineer-in-charge | 1350 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
