Military Engineer Services-MES has published Repair To Roof Treatment Cgi Sheet Ac Sheet And Chajjas Rain Water Pipes Including Plastering Plinth Protection Flooring And Parapet Etc In Zone-Ii To Zone-Viii Of Tbrl Range Ramgarh. Submission Date for this Tender is 11-10-2019. Shed Construction Tenders in Ramgarh Haryana. Bidders can get complete Tender details and download the document.
Name of Work: REPAIR TO ROOF TREATMENT, CGI SHEET, AC SHEET AND CHAJJAS RAIN WATER PIPES INCLUDING PLASTERING, PLINTH PROTECTION, FLOORING & PARAPET ETC IN ZONE-II TO ZONE-VIII OF TBRL RANGE RAMGARH | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water.\n | 760 | Square Metre | |
2 | 2 | Demolition of cement concrete(unreinforced) in ground floor and paving nexc 15cm thickness (below or above ground level) etc all as specfiied and as directed.\n | 15.2 | Square Metre | |
3 | 3 | Demolition of brick work built in cement mortar.\n | 16 | Cubic Metre | |
4 | 4 | Material and labour Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6\n | 15 | Cubic Metre | |
5 | 5 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.\n | 10 | Square Metre | |
6 | 6 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings | 330 | Square Metre | |
7 | 7 | Dismantling of Corrugated Galavanised Sheets in roof coverings | 25 | Square Metre | |
8 | 8 | Supply and fix 0.5mm thick Hi-rib trapezoidal pre-painted galvalume sheet (1060mm) sheet of 550 mpa strength with 30mm crest height and 200mm pitch distance with guard film, side lap and end lap and fixing with nut bolt as per manufacturers instruction, complete all as specified and directed.\n\n | 300 | Square Metre | |
9 | 9 | Supply and fix 0.5mm thick pre-painted galvalume sheet plain sheet of 550 mpa strength with guard film, as in ridges/vally/gutter of width 610mm, fixing with nut bolt as per manufacturers instruction, complete all as specified and directed. \n\n\n | 10 | Square Metre | |
10 | 10 | Supply and fixing GI corrogated mild steel sheeting 0.63mm thick class VIII with two corrogation side lap fixed with 'L' or 'J' hook and washer in roof complete all as directed.\n | 20 | Square Metre | |
11 | 11 | All as per item No 10 above but except sheet\n | 10 | Square Metre | |
12 | 12 | Material and labour 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with 'L' or 'J' hook and washer in roof complete all as directed.\n | 20 | Square Metre | |
13 | 13 | All as per item No 12 above but except sheet\n | 20 | Square Metre | |
14 | 14 | Supply and fixing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as directed.\n | 20 | Square Metre | |
15 | 15 | Dismantling MS work of any description all as specified.\n | 13 | Quintal | |
16 | 16 | Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket\nframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified \n | 500 | Kilogram | |
17 | 17 | Supply and fixing Tee section/Angles fixed independently without connecting plates etc (cut to ordinary length within 20mm of the length indicator of grade FC 410W as directed by Engineer-in-Charge.\n | 800 | Kilogram | |
18 | 18 | Dismantling of brick tiles or terracing tiles, single layer on roof & and stacking serviceable tiles for use and disposal of unserviceable material all as specifed | 600 | Square Metre | |
19 | 19 | Demolition mud in roofs , any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)\n | 48 | Cubic Metre | |
20 | 20 | Material and labour 80mm thick average consolidated thickness mud phuska on flat roofs including 25mm thick mud plaster all as specified.\n | 600 | Square Metre | |
21 | 21 | Material and labour 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska.\n | 450 | Square Metre | |
22 | 22 | All as per item No 21 above but except brick tiles\n | 150 | Square Metre | |
23 | 23 | Material and labour flush pointing in CM (1:3) to brick work or brick tile laid in floors or surface channels roof etc | 80 | 10 Square Metre | |
24 | 24 | Taking down existing water proofing treatment and chesling the existing bituminou coating and rubbish off the premises to a distance exeeding 150 mtr and n. exc 250 mtr all as specified | 250 | Square Metre | |
25 | 25 | Roughning the surface cleaning and washing down with water to remove dust etc | 250 | Square Metre | |
26 | 26 | Cutting grooves in bricks work 75mm wide and 65mm deep and shaping horigontal face of groove with cement mortar 1:3 including filling the groove with cement mortar 1:3 after tuching the felt and finishing surface even and fair complete all as speficified and directed | 10 | Running Metre | |
27 | 27 | Cutting out cracks to V section in existing roof surfaces or terraces, cleaning out, wetting grouting with cement and sand slurry 1 : 3 mixed with integrall water proofing comound all as specified | 50 | Running Metre | |
28 | 28 | Material and labour for plain cement concrete Type B-0, 1:2:4 (using 20 mm graded granite stone aggregate) in roof kerbs, mud stops, rounded or chamfered on edges. | 1 | Cubic Metre | |
29 | 29 | Providing plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate on roof surfaces as padding to receive waterproofing treatement and to the required slope including finishing the exposed surface even and fare all as specified and directed | 8 | Cubic Metre | |
30 | 30 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces of slab in cement mortar (1:4) and finished even and fair with using water proof compound @ 2% by wt of Cement all as specified | 250 | Square Metre | |
31 | 31 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning of surfaces. | 250 | Square Metre | |
32 | 32 | Material and labour for APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster nonwove fabric (wt n less than 150gm/Sqm) laid on primed surface by forced application complete all as specefied. | 250 | Square Metre | |
33 | 33 | Supply only integral water proofing compound (WPC), ISI marked complete all as specified and as directed.\n | 55 | Kilogram | |
34 | 34 | Demolition of roof treatment brick, coba of any description and in any position and cleaning the surface including removal off rubbish complete all as specified and as directed.\n | 11.25 | Cubic Metre | |
35 | 35 | Material and labour for 75mm thick (average thickness) coba water proofing to roof slab by treating the surfaces by applying cement slurry @ 3Kg per Sqm mixed with minimum 1% w.p.c by weight of cement (or as recommended by the manufacturer), then plastering the surfaces 15mm thick in CM 1:4 mixed with minimum 1% w.p.c by weight of cement (or as recommended by the manufacturer), providing minimum 40mm thick brick bats having width of joint 20 to 25 mm wide and grouting the joints with cement mortar (1:4) mixed with minimum 1% w.p.c by weight of cement (or as recommended by the manufacturer) and again rendering 20mm thick in CM 1:4 mixed with minimum 1% w.p.c by weight of cement (or as recommended by the manufacturer) and finished even and fair complete all as specified and as directed. (WPC shall be acrylic based polymer water proofing compound)\n | 150 | Square Metre | |
36 | 36 | Taking down asbestos cement rain water pipe of any dia fixed to wall including all fittings complete | 30 | Running Metre | |
37 | 37 | Supply and fixing 110 mm PVC (SWR ) pipe single socketed in any lengh with rubber ring joints fixed to walls all as specified | 30 | Running Metre | |
38 | 38 | Supply and fixing 110 mm PVC (SWR ) Bend any radius all as specified | 15 | Each | |
39 | 39 | Material and labour for Roof cleaning by cutting or uprooting grass, vegitation and small plants etc from the roosf/walls and removing rubbish off the premises ,cleaning the surfaces complete all as specified and as directed. | 5500 | Square Metre | |
40 | 40 | Dismantling floor/hearth or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.\n | 643 | Square Metre | |
41 | 41 | Material and labour average 25 mm thick plain cement concrete 1:2:4 type B1 (20mm graded aggregate) even and fair as in level base all as specified | 320 | Square Metre | |
42 | 42 | Material and labour for 9 - 10mm thick Vitrified Ceramic tiles light shad (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles incl screed bed 15mm tk in cement motar 1:6 all as specified and as directed \n | 160 | Square Metre | |
43 | 43 | All as per item No 42 above but as in skirting over 15mm tk rendering in cement motar 1:4 all as specified and as directed \n | 8 | Square Metre | |
44 | 44 | Material and labour for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles incl screed bed 15mm tk in cement motar 1:6 all as specified and as directed \n | 80 | Square Metre | |
45 | 45 | All as per item No 44 above but as in skirting over 15mm tk rendering in cement motar 1:4 all as specified and as directed \n | 8 | Square Metre | |
46 | 46 | Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15mm tk in cement motar 1:6.\n | 60 | Square Metre | |
47 | 47 | All as per item No 46 above but as in skirting over 15mm tk rendering in cement motar 1:4 all as specified and as directed \n | 5 | Square Metre | |
48 | 48 | Material and labour glazed ceramic tiles (coloured) 450X300X6-7mm thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over 15mm thick rendering CM 1:4 all as specified and as directed.\n | 70 | Square Metre | |
49 | 49 | Material and labour for Machine cut kota stone 550x550x18-20mm thick over cement screed base flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing compleate over 20mm th screed in CM 1:6 all as specified and directed. | 100 | Square Metre | |
50 | 50 | Material and labour Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over 15mm cement screed in CM 1:4 and jointed with ditto as per item 13014 compleate all as specified and directed. | 10 | Square Metre | |
51 | 51 | Material and labour for Grinding ,Polishing and wax polishing to kota stone/Terrazzo tile flooring including cleaning ,rubbing complete all as specified and as directed. | 150 | Square Metre | |
52 | 52 | Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and refixing in same opeing complete all as specified and as directed.\n | 10 | Per leaf | |
53 | 53 | Supply and fixing for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry and pigment in floors incl screed bed 20mm thk in cement motar 1:6 all as specified. | 160 | Square Metre | |
54 | 54 | Material and labour Cement concrete in 75mm thick for plinth protection type C-2 1:3:6 (40 mm graded agg) finished even and smooth \n | 160 | Square Metre | |
55 | 55 | Material and labour average 40 mm thick plain cement concrete 1:2:4 type B1 (20mm graded aggregate) even and fair as in level base all as specified | 80 | Square Metre | |
56 | 56 | Disconnecting existing tanks of capcity exc 500 liters & n.exc 1000 litre , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. | 5 | Each | |
57 | 57 | Dismantling water tanks (Capacity 500 Ltrs), removing from site and supply & fix rotational moulded polythenlyte water storage tank (cylinderical vertical with closed top) capacity 500 ltrs. hoisted and fixed in position all as specified.\n | 5 | Each | |
58 | 58 | Taking down or up steel tubing and connection incl cleaning for refixing for 15mm dia\n | 50 | Running Metre | |
59 | 59 | Taking down or up steel tubing and connection incl cleaning for refixing for 20mm dia\n | 40 | Running Metre | |
60 | 60 | Material and labour GI tubing, 15mm bore medium grade all fittings & fixed complete to walls & cuttings or laid in floors all as specified. | 30 | Running Metre | |
61 | 61 | Material and labour GI tubing, 20mm bore medium grade all fittings & fixed complete to walls & cuttings or laid in floors all as specified.\n | 20 | Running Metre | |
62 | 62 | Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.\n | 20 | Running Metre | |
63 | 63 | Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.\n | 20 | Running Metre | |
64 | 64 | Supply and fixing ball valve brass 20mm bore high pressure with polythine float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.\n | 5 | Each | |
65 | 65 | Supply and fixing stop valve 20mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fixed in repair complete all as specified. | 5 | Each | |
66 | 66 | Material and labour rendering 12 mm thick on fair faces of brick or concrete surfaces in CM 1:4 rendering is to be finished even and smooth with using of water proofing compound all as specified and directed . (Note : WPC shall be paid seprately). \n | 450 | Square Metre | |
67 | 67 | Material and labour rendering 12 mm thick on fair faces of brick or concrete surfaces finished even and smooth in CM 1:6 all as specified\n | 250 | Square Metre | |
68 | 68 | Material and labour rendering 5 mm thick on fair faces of concrete surfacesof ceiling finished even and smooth in CM 1:3 all as specified\n\n | 60 | Square Metre | |
69 | 69 | Material and labour two coats of cement base paint on walls incl preparation of new plastered surfaces.\n | 150 | Square Metre | |
70 | 70 | Material and labour one coats of cement base paint on walls incl preparation of old surfaces.\n | 200 | Square Metre | |
71 | 71 | Material and labour prepare new surface by white cement/wall putty to obtain smooth and finished surface and applying two coats exterior acrylic emulsion paint over a coat of primer complete.\n | 200 | Square Metre | |
72 | 72 | Complete Removal existing treatment of external surfaces by wire brush/grinder and prepare and levelling/edeging the distrurbed surface by white cement/wall putty to obtain smooth and finished surface and applying two coats exterior acrylic emulsion paint over a coat of primer complete.\n | 250 | Square Metre | |
73 | 73 | Material and labour two coats of Oil Bound Distemper over a coat alkaliresistant priming paint on walls incl preparation of new surfaces.\n | 100 | Square Metre | |
74 | 74 | Material and labour three coat of white wash on ceiling incl preparation of old surfaces\n | 50 | Square Metre | |
75 | 75 | Material and labour preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.\n | 40 | Square Metre | |
76 | 76 | Material and labour one coat of synthetic enamel paint including preparation of old surfaces of steel surface based material exc. 10 cm width or girth complete all as specified and as directed. \n | 20 | Square Metre | |
77 | 77 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified.\n | 40 | Square Metre | |
78 | 78 | Supply and fixing rough cast wired glass 6.4mm thick in panels of aluminium doors/ windows/ partitions fixed with aluminium glazing clips in square exc 0.75Sqm and not exceeding 1.00 Sqm.\n | 25 | Square Metre | |
79 | 79 | Supply and fixing 6mm thick polycarbonet sheet fixed with screws or adhesive as in glass of Door/window all as specied | 15 | Square Metre | |
80 | 80 | Dismantling of old PVC flooring all as specified and as directed.\n | 80 | Square Metre | |
81 | 81 | Material and labour for antistatic PVC flooring 2mm thick flexible with electrical resistant laid on PCC floor with and including using PVC adhesive fevicol SR-998 complete all as specified and directed. \n | 80 | Square Metre | |
82 | 82 | Removing of old copper strip of size 0.25 x 25mm wide fixed in floor with screws all as specified and directed.\n | 60 | Running Metre | |
83 | 83 | Material and labour for copper grid of 0.25mm thick 25mm wide on floor in rows at 60 Cm c/c fixed with steel screws including drilling holes and connected to earthing all as directed by Engr-in-Charge.\n | 40 | Running Metre | |
84 | 84 | All as per item No 82 above here-in-before but except copper strips \n | 20 | Running Metre | |
85 | 85 | Demolition of concrete(other than ground floor ), beams staircases, roofs , chajjas and similar suspended work in any description and in any position not otherwise specifically provided for all as specfiied and as directed.\n | 1 | Cubic Metre | |
86 | 86 | Material and labour for formwork to chullah hoods, chajjas troughs and similar items including etc complete all as specified and as directed.\n | 10 | Square Metre | |
87 | 87 | Material and labour reinforcement cement concrete type 1 : 11/2 : 3 as in Chajjas complete all as specified and directed.\n | 0.5 | Cubic Metre | |
88 | 88 | Material and labour TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending etc and binding with mild steel wire connected not less than 0.9mm dia or securing with clips complete all as specified and as directed.\n | 50 | Kilogram |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail