Delhi Urban Shelter Improvement Board has published Construction Of Community Hall/Bvk Up-Gradation Including Ar And Mo , Relaying Of Sewer Line , Replacing Damage Kota Stone Outside The Building , Providing Fastener In The Stone Wall Cladding And Other Repair Etc . At Community Hall Sangam Park Ac-1. Submission Date for this Tender is 04-10-2019. Building Work Tenders in Sangam Park Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Community Hall/BVK Sub Head :Up-gradation including AR & MO, relaying of sewer line , replacing damage kota stone outside the building, providing fastener in the stone wall cladding & other repair etc. at Community Hall Sangam Park AC-18.(PID NO-11750) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 58.05 | cum | |
| 2 | 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 20 | KG | |
| 3 | 3 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :\n 15 mm to 40 mm nominal bore | 40 | metre | |
| 4 | 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 50 | sqm | |
| 5 | 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below | 1 | each | |
| 6 | 6 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : s Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | 10 | sqm. | |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering . All work upto plinth level.1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | 56.16 | cum | |
| 8 | 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20\nmm nominal size) | 29.03 | cum | |
| 9 | 9 | Half brick masonry with non modular fly ash lime Gypsum bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 20 | sqm | |
| 10 | 10 | Providing and fixing P.T.M.T bib cock of approved quality colour and make : 15 mm nominal size, 86 mm long weighing not less than 88 gms. | 6 | each | |
| 11 | 11 | Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than\n88 gms each | 1 | Each | |
| 12 | 12 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 300 mm diameter | 162 | metre | |
| 13 | 13 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm | 5.6 | Sqm | |
| 14 | 14 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm | 10 | each | |
| 15 | 15 | Providing and fixing aluminium sliding door bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300 X 16 mm | 10 | each | |
| 16 | 16 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300 X 10 mm | 10 | each | |
| 17 | 17 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm | 10 | each | |
| 18 | 18 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary : single rubber stopper | 10 | each | |
| 19 | 19 | Welding by gas or electric plant including transportation of plant at site etc. complete. | 200 | CM | |
| 20 | 20 | Providing and fixing T-iron frames for doors, windows and ventilators ofmild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) | 55.08 | kg | |
| 21 | 21 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. | 549.94 | Sqm | |
| 22 | 22 | Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 100 | kilogram | |
| 23 | 23 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 5 | Sqm | |
| 24 | 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 30 | Sqm | |
| 25 | 25 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,\ncomplete.Size of Tile 500x500 mm | 20 | sqm | |
| 26 | 26 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade : Old work (one or more coats) | 100 | sqm | |
| 27 | 27 | 15 mm cement plaster on rough side of single or half brick wall\nof mix: 1:6 (1 cement: 6 Fine sand) | 10 | sqm | |
| 28 | 28 | Demolishing brick work manually/ by mechanical means including\nstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar cum 842.75 | 1 | cum | |
| 29 | 29 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil | 95.4 | cum | |
| 30 | 30 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm indepth,includingconsolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 231.5 | metre | |
| 31 | 31 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. | 2 | Cum | |
| 32 | 32 | Brick work with non modular fly ash bricks conforming to IS:12894,\nclass designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) | 2 | cum | |
| 33 | 33 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelleddoor shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, withwooden frame and suitableblocks of seasoned wood inside at required places for fixingof fittings, cast monolithically with 5 mm thick FRP laminateforpanelsconforming to IS: 14856, including fixing to frames. sqm | 5.5 | Sqm | |
| 34 | 34 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Framesof cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steadythe frame. | 12.2 | metre | |
| 35 | 35 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes.\n 110 mm diameter metre | 48 | metre | |
| 36 | 36 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conformingto IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mmgapforthermalexpansion.110 mm bend | 16 | each | |
| 37 | 37 | Providing and fixing unplasticised -PVC pipe clips of approved design\nto unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm | 10 | Each | |
| 38 | 38 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | 5 | Each | |
| 39 | 39 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound\nconsisting of applying:\n(a) after surface preparation, first layer of slurry of cement\n@ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer isstill green. Overlaps of joints of fibre cloth should not be lessthan10 cm.(c) third layer of 1.5 mm thickness consisting of slurry ofcement@ 1.289 kg/sqm mixed with water proofing cement compound\n@ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will\nbe allowed to air cure for 4 hours followed by water curing for 48\nhours. The entire treatment will be taken upto 30 cm on parapetwall and tucked into groove in parapet allaround.\n(d) fourth and final layer of brick tiling with cement mortar (which\nwill be paid for separately.For the purpose of measurement the\nentire treated surface will be measured. sqm | 10 | Sqm | |
| 40 | 40 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | 50 | Sqm | |
| 41 | 41 | Neat cement punning. | 10 | Sqm | |
| 42 | 42 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 100 | Sqm | |
| 43 | 43 | White washing with lime to give an even shade :Old work (two or more coats) | 80 | Sqm | |
| 44 | 44 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads\nincluding all lifts involved. | 59.05 | Cum | |
| 45 | 45 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm | 1 | each | |
| 46 | 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid e | 1 | each | |
| 47 | 47 | Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per IS: 1729 | 12 | metre | |
| 48 | 48 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm diaSand cast iron S&S as per IS - 1729 | 2 | each | |
| 49 | 49 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729 | 2 | each | |
| 50 | 50 | Providing and fixing collar :\n17.57.1 100 mm\n17.57.1.1 Sand cast iron S&S as per IS - 1729 | 2 | each | |
| 51 | 51 | Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes and fittings of diameter : 100 mm | 3 | each | |
| 52 | 52 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :\n17.60.1 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729 | 3 | each | |
| 53 | 53 | Providing and placing on terrace (at all floor levels) polyethylene water\nstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow\npipes but without fittings and the base support for tank. 18.48A Circular tank per | 10000 | per litre | |
| 54 | 54 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete : 150 mm diameter metre | 69.5 | metre | |
| 55 | 55 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) up tohaunches of S.W. pipes including bed concrete as per standard\ndesign :150 mm diameter S.W. pipe | 69.5 | metre | |
| 56 | 56 | Constructing brick masonry circular type manhole 0.91 m internaldia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement: 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coatof neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and makingnecessary channel in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) finishedwith a floating coat of neat cement, all complete as per standarddesign : 0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stoneaggregate 20 mmnominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster atthe external surface shall be paid for separately) With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 each | 23 | each | |
| 57 | 57 | Extra depth for circular type manhole 0.91m internal dia (at bottom)beyond 0.91 m to 1.67 mWith common burnt clay F.P.S. (non modular) bricks of\nclass designation 7.5 metre | 2 | metre | |
| 58 | 58 | Extra for depth for manholes :\n Size 90x80 cm With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 metre 5718.60 | 1 | metre | |
| 59 | 59 | Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including\n500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class\ndesignation 7.5 each 4043.10 | 26 | each | |
| 60 | 60 | Extra for every additional lead of 50m or part thereof beyond first 50m upto 9 such additional leads Lime, moorum building rubbish | 177.15 | cum | |
| 61 | 61 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever) conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls andfloors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | 1 | each | |
| 62 | 62 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of\nrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/\nneoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitecturaldrawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg | 71.89 | kg | |
| 63 | 63 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately) Anodised aluminium (anodised transparentor dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) | 84.96 | kg | |
| 64 | 64 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness sqm | 13.07 | sqm | |
| 65 | 65 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers\ncomplete. | 2 | each | |
| 66 | 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVCsolvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall .15mm dia nominal bore | 30 | metre | |
| 67 | 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVCsolvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall.20mm dia nominal bore | 20 | metre | |
| 68 | 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain &brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVCsolvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall.25mm dia nominal bore | 20 | metre | |
| 69 | 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work.15mm dia nominal bore | 30 | metre | |
| 70 | 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work. 20mm dia nominal bore | 20 | metre | |
| 71 | 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work..25mm dia nominal bore | 20 | metre | |
| 72 | 72 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete..25mm nominal bore | 2 | each | |
| 73 | 73 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore | 2 | each | |
| 74 | 74 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New\nwork) :20 mm nominal bore | 3 | each | |
| 75 | 75 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New\nwork) : 25 mm nominal bore | 2 | each | |
| 76 | 76 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end ) : 32 mm nominal bore | 3 | each | |
| 77 | 77 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end ) : 40 mm nominal bore | 3 | each | |
| 78 | 78 | Providing and fixing ball valve ( brass ) of approved quality complete High or low pressure with plastic floats : 20mm nominal bore | 2 | each | |
| 79 | 79 | Providing and fixing in position pre-cast R.C.C. manhole cover and\nframe of required shape and approved quality L D- 2.5 Circular shape 450 mm internal dimensions | 5 | each | |
| 80 | 80 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost ofcutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 1729 | 2 | each | |
| 81 | 81 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | 1 | each | |
| 82 | 82 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings\narrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less\nthan 190 gms. | 1 | each | |
| 83 | 83 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | 2 | each | |
| 84 | 84 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto\n10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in\nwhite cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face fine dressed with rough backing. 30 mm thick | 251.24 | Sqm | |
| 85 | 85 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls\nwherever required. | 565.25 | kg | |
| 86 | 86 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing\nadjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. | 2010 | each | |
| 87 | 87 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thickcement mortar 1:3 (1 Cement : 3 fine sand). | 30 | Sqm | |
| 88 | 88 | Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length ( total length90 m), having 50 nos rounds per 6 metre length, upto 3 m height ofwall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied withG.I. staples and G.I. clips to retain horizontal, including necessarybolts or G.I. barbed wire tied to angle iron, all complete as per directionof Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mmwith tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). | 50 | metre | |
| 89 | 89 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry,\netc. as per direction of Engineer-in-charge.\n 10 x 160 mm . | 8375 | each | |
| 90 | 90 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm diaM.S. tube 1.5 m centre to centre, horizontal & vertical tubes joiningwith cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding forworkingplatform etc. and maintaining it in a serviceable condition for therequired duration as approved and removing it there after Thescaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for theworkmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. sqm Note: - This item to be used for maintenance work judicially,\nnecessary deduction for scaffolding in the existing item to be done. | 1128.8 | SQm | |
| 91 | 91 | Rubbing and polishing old existing kota stone flooring having minimum 5 year old of all thickness complete including cost of labour, material, T & P etc. as per direction of Engineer - in - charge. | 30 | SQM | |
| 92 | 92 | Add prevailing cost index @ 15.69% as per GNCTD order | 0.1569 | each | |
| 93 | 93 | Deduct 9.50% on DSR 2016 as per GNCTD order | 0.095 | Each | |
| 94 | 94 | Less for salves value of retirved unserviceable steel reinforcement bars etc. | 20 | Kg. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
