| 1 | 1 | M&L for preparation of surfaces of walls and applying one coat of white lime wash (white washing) on walls including cornices, pillasters etc all as specified and directed . | | 8000 | Sqm |
|---|
| 2 | 2 | All as per srl item 1 above but as on ceiling surfaces | | 5000 | Sqm |
|---|
| 3 | 3 | M&L for preparation of surfaces of walls and applying one coat of colour wash including cornices, pillasters etc all as specified and directed | | 250 | Sqm |
|---|
| 4 | 4 | M&L Preparation of wood or wooden based surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enmal paint on old painted surfaces all as specified and directed | | 1000 | Sqm |
|---|
| 5 | 5 | All as per srl item No 4 above but on steel surfaces | | 250 | Sqm |
|---|
| 6 | 6 | M&L washing, rubbing down & stopping of painted surfaces and applying one coats of cement base paint all as specified and directed | | 10000 | Sqm |
|---|
| 7 | 7 | M&L washing, rubbing down & stopping of distamper & painted surfaces & applying one coat of oil bound distemper all as specified and directed | | 9000 | Sqm |
|---|
| 8 | 8 | M&L Complete removal of existing treatment and preparing old/New decorated surfaces (Plastered or unplastered ) by brooming down or steel wire brushing scrapping down smoke soot,moulds moss and efflorescent salts and trading oil and greasy spots etc apply after finishing wall surface with birla wall care putty /JK wall care putty to get fair finish on that applying two coats of oil bound distempered over a coat of primer on plastered surfaces. | | 100 | Sqm |
|---|
| 9 | 9 | M & L for sand mat finish on wall surface including removal of old repair sand mat and cleaning the surface neatly and complete all as specified and directed | | 200 | Sqm |
|---|
| 10 | 10 | M&L washing rubbing down and stopping of distempered and painted surfacesand applying one coat of camouflage paint on wall surfaces including proper curing all as specified and directed. | | 400 | Sqm |
|---|
| 11 | 11 | M&L for washing rubbing down and stopping of emulsion painted surfaces and applying one coat of exterior weather proof acrylic paintof exterior grade including preparation of surfaces all as specified and directed | | 500 | Sqm |
|---|
| 12 | 12 | Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified. | | 5 | Cum |
|---|
| 13 | 13 | M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified. | | 3.5 | Cum |
|---|
| 14 | 14 | M & L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified. | | 20 | Sqm |
|---|
| 15 | 15 | Taking down cement plaster brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified. | | 300 | Sqm |
|---|
| 16 | 16 | M&L Rendering/plastering on external surface of the wall of 15mm thick in cement mortar (1:4) on brick wall surfaces, surfaces finished even and fair complete all as specified. | | 150 | Sqm |
|---|
| 17 | 17 | M&L 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. | | 100 | Sqm |
|---|
| 18 | 18 | M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified. | | 50 | Sqm |
|---|
| 19 | 19 | M&L Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified. | | 100 | Sqm |
|---|
| 20 | 20 | M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified. | | 50 | Sqm |
|---|
| 21 | 21 | M&L Preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed. | | 150 | Sqm |
|---|
| 22 | 22 | Taking down chowkat or frame with shutters(without taking off shutters from the frame)not exc 1.50sqm each completed all. | | 10 | Each |
|---|
| 23 | 23 | All as per srl item No above 22 here-in-before but exc 1.5sqm and not exc 4.00 sqm. | | 15 | Each |
|---|
| 24 | 24 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site. | | 10 | Per Leaf |
|---|
| 25 | 25 | All as per srl item No above 24 but exc 2 sqm but nexc 4 sqm | | 2 | Per Leaf |
|---|
| 26 | 26 | M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified. | | 10 | RM |
|---|
| 27 | 27 | All as per item above 26 here-in-before but size 125x60mm with double rebate. | | 20 | RM |
|---|
| 28 | 28 | S&F 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats. | | 20 | Sqm |
|---|
| 29 | 29 | S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat. | | 15 | Sqm |
|---|
| 30 | 30 | S&F of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed. | | 8 | Sqm |
|---|
| 31 | 31 | M & L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of pink primer complete all as specified. | | 35 | Sqm |
|---|
| 32 | 32 | M & L Preparing steel surfaces of of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of red oxide complete all as specified. | | 20 | Sqm |
|---|
| 33 | 33 | M & L PCC (1:2:4), type B-0 using 12.50mm graded stone aggregate as in filling of steel chowkhats complete all as specified. | | 0.2 | Cum |
|---|
| 34 | 34 | S & F Small articles of 2nd class hard wood (hollock, sheesham wood may be used without financial adjustment), such as hinge blocks, door and window stops, articles not exceeding 200 cubic centimeter each and fixed with steel screws, complete all as specified. | | 10 | Each |
|---|
| 35 | 35 | S & F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified. | | 15 | Each |
|---|
| 36 | 36 | S & F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified. | | 20 | Each |
|---|
| 37 | 37 | S & F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified. | | 40 | Each |
|---|
| 38 | 38 | S&F MS barrel tower bolts stone enamelled black with bright bolt,200mm length of bolt. | | 30 | Each |
|---|
| 39 | 39 | S & F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. | | 10 | Sqm |
|---|
| 40 | 40 | S & F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. | | 10 | Sqm |
|---|
| 41 | 41 | S & F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. | | 4 | Sqm |
|---|
| 42 | 42 | S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified | | 10 | Sqm |
|---|
| 43 | 43 | S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete in repairs all as specified . | | 20 | Sqm |
|---|
| 44 | 44 | Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and directed. | | 20 | Sqm |
|---|
| 45 | 45 | S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/Steel window not exc .5 sqm in each pane | | 15 | Sqm |
|---|
| 46 | 46 | M&L Forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified. | | 5 | Sqm |
|---|
| 47 | 47 | S & F Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification | | 35 | RM |
|---|
| 48 | 48 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing. | | 20 | Sqm |
|---|
| 49 | 49 | S & F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified. | | 20 | Each |
|---|
| 50 | 50 | S & F PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed. | | 25 | Each |
|---|
| 51 | 51 | S & F PTMT handle 125mm long fixed with steel screws complete all as specified. | | 30 | Each |
|---|
| 52 | 52 | Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge | | 450 | sqm |
|---|
| 53 | 53 | M&L Non skid ceramic coloured (colour & shade as approved) tiles (square or rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 | | 150 | sqm |
|---|
| 54 | 54 | M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed. | | 15 | Sqm |
|---|
| 55 | 55 | S/F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm / 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed | | 260 | Sqm |
|---|
| 56 | 56 | S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes. | | 25 | Sqm |
|---|
| 57 | 57 | Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. | | 15.3 | x sqm |
|---|
| 58 | 58 | M & L Granite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:4) complete all as specified. | | 3 | Sqm |
|---|
| 59 | 59 | S & F machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over & including complete all as specified and directed. | | 150 | Sqm |
|---|
| 60 | 60 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified. | | 6 | Cum |
|---|
| 61 | 61 | M&L Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) 75mm thick as in sub base of floor complete all as specified & directed. | | 120 | Sqm |
|---|
| 62 | 62 | Demolition of un-reinforced cement concrete in any position complete all as specified. | | 10 | Cum |
|---|
| 63 | 63 | M & L for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40 mm thick, surfaces finished even and smooth without using extra cement complete all as specified. | | 80 | Sqm |
|---|
| 64 | 64 | Supply only 38mmx3mm plastic dividing strips as in floors complete all as specified. | | 20 | RM |
|---|
| 65 | 65 | M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth oprotection, sub base etc 50mm thick, surfaces finished even and smooth without using extra cement complete all as specified. | | 20 | Sqm |
|---|
| 66 | 66 | Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided. | | 5.5 | Cum |
|---|
| 67 | 67 | M&L for pressure grouting with cement slurry adding admixture CONBEX 100 (FOSROC) at a dosage of 225gms for 50Kg of cement including drilling holes, to a depth of 60mm and 3 Nos of holes in 1M x 1M grit pattern all as specified and directed. | | 30 | Sqm |
|---|
| 68 | 68 | M&L a fillet of 75 mm size shall be provided using PCC (1:2:4) type B0 (using12.5 mm graded aggregate) mixed with WPC @3% weight of cement content at the junction of vertical and horizontal surfaces of the sunken portion. Note: WPC Measured and paid seperately\n | | 0.5 | Cum |
|---|
| 69 | 69 | M&L for application of high build polymer modified to floor and vertical wall up to sunken portion with cement mortar Plaster (1: 3) with SBR @ 4 ltr per bag of cement appled as per manufacturer's instrutions. | | 30 | Sqm |
|---|
| 70 | 70 | M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion | | 3 | Cum |
|---|
| 71 | 71 | M&L 30mm thick PCC(1:2:4) using 20mm graded aggregate as in floor finished without using extra cement. | | 30 | Sqm |
|---|
| 72 | 72 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations | | 50 | RM |
|---|
| 73 | 73 | Supply & fixed as in replacement of plastic water closet seat cover coloured pattern with flat complete all as specified. | | 5 | Each |
|---|
| 74 | 74 | Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed. | | 80 | Sqm |
|---|
| 75 | 75 | Demolition of mud phuska on roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified & directed. | | 6.4 | Cum |
|---|
| 76 | 76 | Material and labour for bedding screed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as directed on roof of concrete surface finished even and smooth without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately) including preparation and cleaning of old concrete surfaces or racking out joints in old roof treatment etc complete all as specified and directed. | | 80 | Sqm |
|---|
| 77 | 77 | M&L Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed. | | 80 | Sqm |
|---|
| 78 | 78 | M&L Polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed. | | 80 | Sqm |
|---|
| 79 | 79 | M&L Mud phuska, 80mm thick, average consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and directed. | | 80 | Sqm |
|---|
| 80 | 80 | M&L Brick tiles 40mm thick laid over a 25mm thick layer of mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed. | | 50 | Sqm |
|---|
| 81 | 81 | All as per item No:80 above herein before but except tiles. (tiles retrieved from item No:78 shall be reused) | | 30 | Sqm |
|---|
| 82 | 82 | S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified. | | 4 | Each |
|---|
| 83 | 83 | All as per Srl item No 82 above but 500 ltrs capacity tank | | 9 | Each |
|---|
| 84 | 84 | S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified. | | 20 | Each |
|---|
| 85 | 85 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified. | | 19 | Each |
|---|
| 86 | 86 | S & F in repair stop cock Cast copper alloy screwed down, high pressure with with fancy type chromium plated screwed both ends for iron pipe or union of 15 mm bore fixed in repairs complete all as specified. | | 25 | Each |
|---|
| 87 | 87 | S & F in repair bib tap of cast copper alloy brass 15mm bore, with with fancy type, screwed down screwed for iron pipe or for brass ferrule complete all as specified. | | 40 | Each |
|---|
| 88 | 88 | S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, | | 15 | Each |
|---|
| 89 | 89 | S&F 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified. | | 20 | Each |
|---|
| 90 | 90 | S & F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair. | | 5 | Each |
|---|
| 91 | 91 | S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe as in repair complete all as specified. | | 15 | Each |
|---|
| 92 | 92 | S & F in repair 125mm dia CP grating doom fixed over trap with cement complete all as specified and directed | | 15 | Each |
|---|
| 93 | 93 | S&F 600mm long cp towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified. | | 6 | Each |
|---|
| 94 | 94 | Supply & fixed in repairs PVC waste pipe with waste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts complete all as specified and directed | | 40 | Each |
|---|
| 95 | 95 | Supply & fixed in repairs steel sink with dranage board made out of 1mm thick stainless steel sheet in kitchen or laboratory with plug washers and waste fittings including bedding in cement mortar on dwarf wall , including fixing cantilever brackets and connecting unions to pipe overall size of sink 915x460 and bowl size 410x330x160mm complete all as specified and directed. | | 2 | Each |
|---|
| 96 | 96 | S & F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete | | 6 | Each |
|---|
| 97 | 97 | S&F Vitrous china (White) half stall urinal with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, with brackets, flush pipe, union for discharge pipe as in repair complete all as specified. | | 2 | Each |
|---|
| 98 | 98 | Dismantling of sttel work including doors ,gates but excluding framed truss etc complete all as spd and directed | | 2 | Qtl |
|---|
| 99 | 99 | S&F mild steel Fe 410 -W(Gde E-250 quality Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. | | 200 | Kgs |
|---|
| 100 | 100 | Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and directed. | | 90 | Sqm |
|---|
| 101 | 101 | M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified. | | 50 | Sqm |
|---|
| 102 | 102 | S&F Asbestos cement two piece adustable serrated plain ridge 6mm thick for corrugated or semi corrugated incl J or L hook complete all as specified. | | 10 | RM |
|---|
| 103 | 103 | S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. | | 30 | Sqm |
|---|
| 104 | 104 | S&F Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified. | | 30 | Kgs |
|---|
| 105 | 105 | Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified. | | 10 | RM |
|---|
| 106 | 106 | S&F 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified. | | 5 | RM |
|---|
| 107 | 107 | S&F 75mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified. | | 5 | RM |
|---|
| 108 | 108 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. | | 105 | Sqm |
|---|
| 109 | 109 | S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge . | | 70 | Sqm |
|---|
| 110 | 110 | S & F in rep of Gypsum Board 8mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. | | 40 | Sqm |
|---|
| 111 | 111 | S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. | | 35 | RM |
|---|
| 112 | 112 | S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. | | 25 | RM |
|---|
| 113 | 113 | Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed. | | 10 | RM |
|---|
| 114 | 114 | All as per item No.113 here in before but 20mm dia. | | 5 | RM |
|---|
| 115 | 115 | Dismantling of boarding of any description and in any position complete all as specified. | | 51 | Sqm |
|---|
| 116 | 116 | S & F 14-16mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides n complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE | | 21 | Sqm |
|---|
| 117 | 117 | S & F 18mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE | | 5 | Sqm |
|---|
| 118 | 118 | M&L 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter fixed in repair complete all as specified and directed. | | 15 | Sqm |
|---|
| 119 | 119 | S&F extra over rates of black board are veneered particle board for external teak wood lipping 6mm thick, fixed with nails complete all as specified and directed. | | 5.9 | RM |
|---|
| 120 | 120 | S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified. | | 25 | Each |
|---|
| 121 | 121 | Supply & fixed in repair PVC connection 15mm x 450mm size with PTMT nuts. | | 30 | Each |
|---|
| 122 | 122 | Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified. | | 55 | RM |
|---|
| 123 | 123 | S&F PVC (SWR) pipes single socketed 110mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent solvent complete all as specified. | | 40 | RM |
|---|
| 124 | 124 | S&F PVC (SWR) pipes single socketed 75mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent solvent complete all as specified. | | 15 | RM |
|---|
| 125 | 125 | S & F PVC (SWR) bends any radius 110mm bore with access door complete all as specified. | | 5 | Each |
|---|
| 126 | 126 | S & F PVC (SWR) bends any radius 75mm bore with access door complete all as specified. | | 5 | Each |
|---|
| 127 | 127 | S & F 150 MM floor door stopper of Aluminium Alloy and tonged with hard drawn steel spring fancy type in repair | | 25 | Each |
|---|
| 128 | 128 | S & F Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified. | | 25 | RM |
|---|