Annual Rate Contract For Maintenance Of Fire And Safety Equipment At Group B Srpl Ennore Station, Ennore-Tamil Nadu

Annual Rate Contract For Maintenance Of Fire And Safety Equipment At Group B Srpl Ennore Station-3 9 Kg Dcp Extinguisher 4 2 Kg Clean Agent Extinguisher 5 4.5 Kg Co2 Extinguisher 6 Refilling Of Co2 Gas In Cartidges For Using In 10Kg / 9 Kg Dcp Extinguishers Including All & Labour, Transportation Etc.. Complete As Per Specification And Direction Of Eic / Site-Engineer. ( Co2 Cartridge Of 200 Gms ) 7 Service Assistance In Hydrostatic Testing, Inspection Of Safety Valve, And Refilling Of High Pressure Cylinder Through Cce Approved Party And Charging Upto Required Pressure Including Taking Delivery Of The Cylinder From The Station And Returning The Same Inclusive Of All Labour Material, Transportation And All The Other Incidental Expenses. The Cylinder Is To Be Returned Back To The Station Within 15 Days From The Date Of Receiving From The Station And Submission Of Reports And Test Certificates For Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl ) 8 2 Kg Clean Agent Extinguisher 9 4.5 Kg Co2 Extinguisher 10 Hydrostatic Testing Of 9 Kg Dcp Through Cce Approved Party Taking Delivery Of The Cylinder From The Station And Returning The Same Inclusive Of All Labour Material, Transportation And All The Other Incidental Expenses. The Cylinder Is To Be Returned Back To The Station Within 15 Days From The Date Of Receiving From The Station 11 Hydrostatic Testing Of Fire Hoses At 9 K 12 Service Assistance In Hydrotesting And Refilling Of Breathing Apparatus Set Cylinder From Cce Approved Vendor & Filling With Dry Compressed Air Up To A Pressure Of 200 / 300 Bar As Per Direction Of Eic, Inclusive Of Transportation, Handling Charges Complete In All Respect.Cylinders To Be Brought Back To Pump Station In 20 Days From Date Of Despatch / Handing Over Submission Of Reports And Test Certificates For Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl ) 13 Hydrotest Of Breathing Apparatus 14 Refilling As Per The Statutory Norms 15 Checking Of Heat And Smoke Detectors / Multi Sensor Detectors Installed In Control Building, Mcc Rooms, Cable Trenches ( Using Heat Gun And Aerosol Supplied By Owner ) In Each Quarter Inclusive Of Labours Tools Tackles. 16 Service Assistance In Carrying Out Surface Preparation By Hand Tool Cleaning Confirming To St 2 Standard And Painting Extinguishers / Hydrants With One Coat Of Red Oxide Primer & Two Coats Of Fire Red Synthetic Enamel Paint, Hose Boxes, Monitor And Hydrant Outlets Shall Be Painted With Two Coats Of Luminous Yellow Synthetic Enamel Instead Of Fire Red, Including All Consumables, Tools, Tackles Etc. Before Painting Oldstickers To Be Removed & Surface Preparation To Be Done By Contractor. After Painting, Stickers To Be Pasted Back And Numbers And / Or Letters To Be Re-Written By The Contractor For Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl ) 17 2 Kg Clean Agent Fire Extinguisher 18 4.5 Kg Co2 Extinguisher 19 9 Kg Dcp Extinguisher 20 Painting Of Sand Buckets Including Stand 21 Supply Items 22 Supply Of Spares Of Fire Fighting Equipments At Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl As Per Requirement Or As Directed By Eic 23 Discharge Hose Without Squeeze Grip Nozzle, Hose Should Not Burst Or Show Leakage Before 50Kgf / Cm2 24 Safety Clip ( Metal ) With Nylon Thread 25 Dcp Extinguisher Cap Washer 26 Discharge Tube Washer 27 Spares For Co2 Extinguishers With Test Certificates At Each Location At ( Ennore, Vallure Sv, Cpcl, Tpl, Mpcl, Mfl As Per Requirement Or As Directed By Eic, , 28 Hdpe Discharge Horn For 4.5 Kg Capacity Co2 Extinguisher With Fittings 29 High Pressure Discharge Hose For 4.5 Kg Co2 Extinguisher With Fittings 30 Co2 Valve Open Wheel 31 Safety Pin With Nylon String For Co2 Ext 32 Supply & Fitting Of Glass Of Manual Call Points Wherever Required Complete In All Respect Inclusive Of Material, Labour, Consumables Etc 33 Supply Of Hammer For Breaking Glass Of Manual Call Points / Hose Boxes / Emergency Tool Box 34 Fixing Up Of Clamps Of Extinguisher In Wall Including Supply Of Clamps, Screws Etc And Drilling, Fitting Extinguisher To Complete The Work In All Respect As Per Direction Of Eic / Site Engineer 35 Supply & Fitting Of Clamps For Hanging 2Kg & 4.5Kg Co2 Extinguisher On & Wall Including Labour Charges, Tools Tackles &Consumables Complete In All Respect As Per Direction Of Eic. 36 Supply & Fitting Of New Wind Sock ( 0.9M Dia & 1.8Mtr Length ) Made Out Of Synthetic Cloth In Flood Light Tower , Buildings, As Per Direction Of Site Engineer / Eic 37 Supply Of Multi Sensor Detector Along With All Mounting And Other Aceesories As Per Tender Specification

Refer document

INR 4200.0 /-

Refer document

Name of Work: Annual Rate Contract for Maintenance of Fire & Safety Equipment at, Group B: SRPL Ennore Station
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	10	Service Items	Item 00010
2	10.01	Service Assistance in Maintenance and Inspection of DCP and CO2 fire extinguishers which includes checking the weight of catridge, condition of threads of cap, discharge tube, sharpness of piercing pin and cylinder body and submission of report for each location at (Ennore, Vallure SV, CPCL,TPL, MPCL, MFL)	Item 10.10
3	10.02	9 kg DCP extinguisher	Item 10.20	720	EA
4	10.03	2 Kg clean Agent Extinguisher	Item 10.30	192	EA
5	10.04	4.5 kg CO2 extinguisher	Item 10.40	480	EA
6	10.05	Refilling of CO2 gas in cartidges for using in 10kg/9 kg DCP extinguishers including all & labour, transportation etc.. complete as per specification and direction of EIC/Site-Engineer.( CO2 CARTRIDGE OF 200 gms)	Item 10.50	60	EA
7	10.06	Service Assistance in Hydrostatic testing, inspection of safety valve, and refilling of high pressure cylinder through CCE approved party and charging upto required pressure including taking delivery of the cylinder from the station and returning the same inclusive of all labour material,transportation and all the other incidental expenses. The cylinder is to be returned back to the station within 15 days from the date of receiving from the station and submission of reports and test certificates for each location at (Ennore, Vallure SV, CPCL,TPL, MPCL, MFL)	Item 10.60
8	10.07	2 Kg clean Agent Extinguisher	Item 10.70	8	EA
9	10.08	4.5 kg CO2 extinguisher	Item 10.80	20	EA
10	10.09	Hydrostatic testing of 9 kg DCP through CCE approved party taking delivery of the cylinder from the station and returning the same inclusive of all labour material,transportation and all the other incidental expenses. The cylinder is to be returned back to the station within 15 days from the date of receiving from the station	Item 10.90	30	EA
11	10.1	Hydrostatic testing of fire hoses at 9 K	Item 10.100	2	EA
12	10.11	Service Assistance in Hydrotesting and refilling of breathing apparatus set cylinder from CCE approved vendor & filling with dry compressed air up to a pressure of 200/300 Bar as per direction of EIC, inclusive of transportation, handling charges complete in all respect.Cylinders to be brought back to pump station in 20 days from date of despatch/handing over submission of reports and test certificates for each location at (Ennore, Vallure SV, CPCL,TPL, MPCL, MFL)	Item 10.110
13	10.12	Hydrotest of breathing apparatus	Item 10.120	6	EA
14	10.13	Refilling as per the statutory norms	Item 10.130	12	EA
15	10.14	Checking of heat and smoke detectors/Multi sensor detectors installed in Control building, MCC rooms, cable trenches (using heat gun and Aerosol supplied by Owner) in each quarter inclusive of labours tools tackles.	Item 10.140	60	EA
16	10.15	Service Assistance in Carrying out surface preparation by hand tool cleaning confirming to St 2 standard and Painting extinguishers/hydrants with one coat of red oxide primer & two coats of Fire red synthetic enamel paint, Hose boxes, monitor and hydrant outlets shall be painted with two coats of Luminous yellow synthetic enamel instead of fire red, including all consumables, tools, tackles etc. Before painting oldstickers to be removed & surface preparation to be done by contractor. After painting, stickers to be pasted back and numbers and/or letters to be re-written by the Contractor for each location at (Ennore, Vallure SV, CPCL,TPL, MPCL, MFL)	Item 10.150
17	10.16	2 Kg Clean Agent Fire extinguisher	Item 10.160	8	EA
18	10.17	4.5 Kg CO2 extinguisher	Item 10.170	20	EA
19	10.18	9 Kg DCP extinguisher	Item 10.180	30	EA
20	10.19	Painting of sand buckets including stand	Item 10.190	12	EA
21	20	Supply Items	Item 00020
22	20.01	Supply of spares of fire fighting equipments at each location at (Ennore, Vallure SV, CPCL,TPL, MPCL, MFL as per requirement or as directed by EIC	Item 20.10
23	20.02	Discharge hose without squeeze grip nozzle, hose should not burst or show leakage before 50Kgf/cm2	Item 20.20	6	EA
24	20.03	Safety clip ( metal) with nylon thread	Item 20.30	6	EA
25	20.04	DCP extinguisher cap washer	Item 20.40	6	EA
26	20.05	Discharge tube washer	Item 20.50	6	EA
27	20.06	Spares for CO2 extinguishers with test certificates at each location at (Ennore, Vallure SV, CPCL,TPL, MPCL, MFL as per requirement or as directed by EIC,,	Item 20.60
28	20.07	HDPE discharge horn for 4.5 Kg capacity CO2 extinguisher with fittings	Item 20.70	4	EA
29	20.08	High pressure discharge hose for 4.5 Kg CO2 extinguisher with fittings	Item 20.80	4	EA
30	20.09	CO2 valve open wheel	Item 20.90	4	EA
31	20.1	Safety pin with nylon string for CO2 ext	Item 20.100	6	EA
32	20.11	Supply & fitting of glass of Manual Call Points wherever required complete in all respect inclusive of material, labour,consumables etc	Item 20.110	4	EA
33	20.12	Supply of hammer for breaking glass of Manual Call points / Hose boxes / Emergency tool box	Item 20.120	4	EA
34	20.13	Fixing up of clamps of extinguisher in wall including supply of clamps, screws etc and drilling, fitting extinguisher to complete the work in all respect as per direction of EIC / site engineer	Item 20.130	6	EA
35	20.14	Supply & fitting of clamps for hanging 2Kg & 4.5Kg Co2 extinguisher on & wall including labour charges, tools tackles &consumables complete in all respect as per direction of EIC.	Item 20.140	10	EA
36	20.15	Supply & fitting of new wind sock( 0.9m dia & 1.8mtr length) made out of synthetic cloth in flood light tower , buildings, as per direction of site engineer/ EIC	Item 20.150	12	EA
37	20.16	Supply of Multi sensor detector along with all mounting and other aceesories as per tender specification	Item 20.160	6	EA