Special Repairs To Air Conditioner Plant And Cold Storage Room At Afmsd Kandivali Mumbai Under Ge North Santacruz, Ge North Santacruz-Maharashtra

TDR : 21807614

Tender Notice
BOQ

Expired

Ge North Santacruz , Maharashtra

Tender Brief : Special Repairs To Air Conditioner Plant And Cold Storage Room At Afmsd Kandivali Mumbai Under Ge North Santacruz

Document Fees
₹ 1000 /-

EMD
₹ 141000.0 /-

Tender Value
₹ 77.81 Lakhs /-

Submission Date
19-09-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work : SPECIAL REPAIRS TO AC PLANT AND COLD STORAGE ROOM AT AFMSD KANDIVALI MUMBAI UNDER GE( NORTH) SANTACRUZ
1	1	Demolition of brick work built in cement mortar and removal of debris out of MD land complete all as specified & directed by Engineer-in-Change	10	Cum
2	2	Taking down cement plaster on brick / concrete surface etc on internal / external surface of wall / ceiling surface incl racking out joints hacking for key, scrubing down with water complete all as specified and as directed by Engr-in-Charge and deposited the debris outside the premises as directed	500	Sqm
3	3	M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement morter 1:6 complete all as specified & directed by Engineer-in-Change	10	Cum
4	4	M&L for rendering 10mm thick using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc. complete all as specified & directed by Engineer-in-Charge	150	Sqm
5	5	M&L for rendering 5 mm thick on ceiling using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound build care Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in ceiling, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc. complete all as specified & directed by Engineer-in-Charge .	50	Sqm
6	6	M & L for rendering 15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute work etc. complete all as per specifications & as directed by the EIC	300	Sqm
7	7	Removing of Loose disturbed & disintegrated concrete surface of RCC beams, columns, Chajjas, lintels, ceiling etc. and cleaning exposed rusted reinforcement, removing rusted scales by chipping and cleaning by wire brushes and applying anti corrosive epoxy coating as per manufactures instructions on prepared surface to receive gunninting including necessary scaffolding and preparing to support damaged structural members, supply and tying welded wire mesh 100 mm × 100 mm × 10 mm, binding with GI wire 22 gauge to reinforcement, applying cement slurry uniformly to exposed surfaces and gunniting using CM 1:3 average gunninting not less than 25 mm and finishing the surface in 10 mm thick plaster of CM 1:3, trowled even and smooth finish, without using extra cement and removing debris outside MD land to distance any where outside as directed by Enginner-in-Charge	50	Sqm
8	8	Taking down chowkats or frames n. exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing the stores.	12	Each
9	9	Taking down door chowkats or frame (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 Sqm each	4	Each
10	10	S & F powder coated coloured aluminium sections for sliding windows, ventilators, door partition including facbrication of frame shutters and and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazings clips, and rubber beadings for fixing glass panes ifn frame complete all as specified. \nNote : (i) Glass panes & stainless steel wire cloth will measured & paid separately . \n (ii) Rubber beading will not be weighed.	180	Kgs
11	11	S&F 15 micron coloured aluminium anodised grill design no. DG-202, 10mm thik cut to required size/shape and fixed with position with al bedding & frame make : M/S Decogrill or equivalent with & including F sections, all as specified and directed.	10	Sqm
12	12	Supply only 4.8mm thick ordinary sheet glass, selected quality, in squares n.exc 0.5 sq.m each pane.	9	Sqm
13	13	S & F aluminium anodised wire cloth 0.45 nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staple.	5	Sqm
14	14	M&L 18 to 20 mm thick machine cut marble in jambs / cills / soffits of door / window / ventilator as in frame work to support for aluminium section and like in cement mortar including pointing in white cement using marble dust (1:2) with admixure of pigment to match with marble shade including 10mm thick backing coat in CM (1:4) (Colour of marble shall be as approved by Eng-in-Charge).	15	Sqm
15	15	Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing servicable tiles to store and rubbish off the premises.	40	Sqm
16	16	M&L non skid ceramic coloured tiles of 8 to 10 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15 mm thick in CM 1:6 complete all as specified and as directed by Engineer-In-Charge.	35	Sqm
17	17	-Ditto- all as per item No 16 but on vertical surfaces such as skirting, dado and riser / steps complete all as specified including backing coat 10mm 1:4 complete all as specified and as directed by Engineer-In-Charge.	5	Sqm
18	18	Dismantling wall and ceiling boards (fibre , pulp, insulation etc) or insulation boards /slabs/blankets, any thickness including frame work cover fillets complete all as specified and as directed by Engr-in-charge.	70	Sqm
19	19	S& F rolled steel sections as in framing for false ceiling of angle or tee section like fixed with angle cleats or other connecting plates incl necessary welding confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed by Engr-in-charge.	400	Kg
20	20	S & F 6mm thick asbestos cement plain building board fixed to structural steel framed work with screws if necessary incl 02 coats of white wash on false ceiling complete all as specified and as directed by Engr-in-charge.	70	Sqm
21	21	M&L preparing new steel surfaces of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.	105	Sqm
22	22	M&L cutting holes in brick wall built in cement mortar for inserting holdfast, walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed.	25	Each
23	23	Demolition of cement concrete / cement lime concrete/mud faska (unreinforced in roof and terrace other than ground floor) any description complete all as specified and as directed by Engineer-In-Charge.	150	Cum
24	24	M&L for 40mm thick of cement concrete 1:2:4 typ B-1 (using 20mm graded stone aggregate) with using water proofing compound on roof slab/terrace as levelling conctere and finished even and fair without using extra cement. (Note:- i) Water proofing compound shall be measured and paid seperately).	400	Sqm
25	25	M&L for rendering 10 mm thick cement plaster in cement mortar (1:3) on roof slab/ canopies/chajjas water proofing compound @ 3% by weight of cement or as per manufacturer's instructions and make surfaces to receive water proofing treatment, finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid seperately)	900	Sqm
26	26	M&L preparation of surfaces by removing bitumen based water proofing treatment completely removed by mechanical scarification or by any other effective machanical means and prepare the normal surface throughly by cleaning , washing and removing dust, dirt oil, grease, any loose particles etc and applying one coat of Dr FIXIT prime seal diluted with water in the ratio 2:1 and dry minimum 2-3 hours and apply Dr FIXIT new coat or equivalent in three coats at the rate 0.50 litre per sqm in each coat and dry 6 to 8 hrs after each coat with and including put woven glass fibre mesh 2-5 mm x 2.5mm between first coat and second coat complete all as specified and as directed	900	Sqm
27	27	Supply only integral water proofing compound.	300	Kg
28	28	M&L Providing cement concrete type Bo 1:2:4 (12.5 mm graded aggregate) in roof kerbs of mud stops, rounded or chamfered of edges complete all as specified and as directed by Egnr-in- charge.	1	Cum
29	29	M&L Preparing newly plastered surface and apply 3 coats of white wash on ceiling complete all as specified and as directed by Engineer-In-Charge.	50	Sqm
30	30	M&L Preparation of new plasterered surfaces and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of primer on wall surfaces complete including all as specified and directed by engineer in charge or as per manufacturer instructions.	300	Sqm
31	31	Removal of existing treatmnt incl filling of all cracks with approved quality of crack filler & applying two coats of acrylic weather proof coat 100 % exterior grade (apex) over one coat of primer complete,all as spd and directed by Eng-in-charge	150	Sqm
32	32	M&L for preparation of new plastered surfaces of wall and applying two coats of oil bond distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed	150	Sqm
33	33	Removal of existing treatment of walls incl filling of all cracks with approved quality of crack filler and applying two coats of oil bound distemper over a coat alkali resistant priming paint complete,all as spd and directed by Eng-in-charge	200	Sqm
34	34	Dismantling of 110/150 mm dia cast iron/PVC pipes jointed in cement mortar and taking out if reqd.	70	Rm
35	35	S&F PVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 150mm dia, fixed to walls complete all as specified and as directed by Engineer-In-Charge. .	50	Rm
36	36	Fixing only PVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 150mm dia, fixed to walls complete all as specified and as directed by Engineer-In-Charge. .	20	Rm
37	37	S&F PVC (SWR) bends any radius, 150mm dia complete all as specified and as directed by Engineer-In-Charge.	12	Each
38	38	S&F PVC (SWR) shoes, 150mm dia complete all as specified and as directed by Engineer-In-Charge.	12	Each
39	39	S&F PVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 110mm dia, fixed to walls.	15	Rm
40	40	S&F PVC (SWR) bends any radius, 110mm dia complete all as specified and as directed by Engineer-In-Charge.	6	Each
41	41	Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified and as directed by Engineer-In-Charge.	130	XSqm
42	42	M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over a screed bed 15mm in CM (1:6).	120	Sqm
43	43	M&L Kota stone slab 20-25 mm thick in riser of steps , skiriting , dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over a backing coat or plaster, 10 mm thick in CM (1:4)	10	Sqm
44	44	M & L PCC (1:2:4) type B-o (using 12.5 mm graded stone aggregate) 40 mm thick as in base contrete as in levelling course complete all as specified. & directed by Eng-in-charge	170	Sqm
45	45	Demolition of Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land complete all as specified and as directed by Engineer-In-Charge.	19	Cum
46	46	Surface excavation n.exc. 30 cm deep and avg 15 cm deep and getting out in soft/loose soil and removing rubbish outside MD land complete all as specified and as directed by Engineer-In-Charge.	80	Sqm
47	47	M&L for hardcore of gauge n exc 63 mm,deposited,spread & levelled in layers n exc 15 cm thk watered & rammed to a true surface complete all as specified and as directed by Engineer-In-Charge.	6	Cum
48	48	M&L for 75mm thick cement concrete (1:4:8) type D-2, (40mm graded aggregate) as in sub base complete all as specified and as directed by Engineer-In-Charge.	80	Sqm
49	49	M&L in repair, for machine pressed precast concrete laquer finish interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks and filling the joints with sand complete all as specified and directed.	80	Sqm
50	50	M&L for providing cement concrete 50mm thick, 1:3:6 (type C-2 using (40mm graded stone aggregate) as in plinth protection and similar work complete all as specified and as directed by Engineer-In-Charge.	90	Sqm
51	51	M&L for 100mm thick plain cement concrete 1:2:4 (type B-2) using 40mm graded trap stone aggregates, as in sub base, flooring etc complete all as specified and as directed by the Engineer-in-charge	100	Sqm
52	52	Taking down rolling shutters, push type or manually operated of size exc.5sqm but not exc. 10sqm all as directed.	1	Each
53	53	S&F steel rolling shutter, gear operated type, with bevel gear box and crank handle complete thickness of laths 1mm, push, pull or manually operated type, without ball bearing as specified including top cover, anchoring rod hasp and staple and one coat of primer erracted in position complete all as specified and directed. Note:- Provision of Safety locks and ball bearings shall be measured and paid for separately.	10	Sqm
54	54	S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.	2	Each
55	55	S&F Ball bearing for rolling shutters complete all as specified and directed.	2	Each
56	56	Dimantling structural steel work incuding doors , gates but excluding framed trusses etc.	1	Qtls
57	57	S&F framed work as in doors/gates of angle or other sections with gusset plates, rails, braces etc complete drilled for fixing of sheeting or other covering doors etc to be prepared for hanging or sliding etc complete.	150	Kg
58	58	S&F plates 8 mm thick (plain or chequrred) , channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed by Engineer-in-Charge.	100	Kg
59	59	S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates etc. FE410W(GdeE-250 qualityB)	50	Kg
60	60	M & L Surface preparation of existing concrete components including griding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists. Cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water throughly complete all as specified and directed by Engr-in-Charge.	70	Sqm
61	61	S&F CRS (Corrosion ressistant steel), 10mm dia and over cut to length bent to shape required incl cranking, bending sipirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. (Note: Rate included cutting of rusted reinforcement & welding)	150	Kg
62	62	S&F CRS (Corrosion ressistant steel), 8 to 10mm dia in stirrups, spacers and binder cut to length bent to shape required incl cranking, bending sipirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. (Note: Rate included cutting of rusted reinforcement & welding)	70	Kg
63	63	Demolition of reinforcement cement concrete of any descriptionand in any position not otherwise specifically provided for woll (reinforcement cut as required to facilitate demolition).	0.5	Cum
64	64	Providing & Fixing MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour and but excludes the materials for grouting the pins.etc complete all as specified and as directed by Engr-in-Charge.	40	Nos
65	65	Providing and casting and repairing of excessively damaged members with microconcrete at all levels with all leads and lift as directed including mixing , laying, levelling, finishing including curing and formwork of steel or marine ply complete. Grade of Micro-concrete to be M 30 at 28 days and shall be sourced from manufacturer's such as Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .	0.5	Cum
66	66	Providing and fixing the formwork of to pour the microconcrete/concrete using steel shutters or 12mm marine ply to have the form finish including de-shuttering etc complete all as specified and as directed by Engr-in-Charge.	20	Sqm
67	67	Providing and applying rust cleaner (Re-backler solution) to exposed corroded reinforcement @ 0.20 Litre/Sq or approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc. complete as directed by Engineer-In-Charge.	70	Sqm
68	68	Providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardner mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc. complete all as specified and as directed by Engr-in-Charge.NOTE:- New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be included in quoted rates.	70	Sqm
69	69	Providing and applying a priming cum bonding coat of two component Epoxide Resin confoms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge etc.complete.	70	Sqm
70	70	M&L Drilling and fixing teflon nozzles in RCC members, including drilling holes (drilling 12 mm dia, 40mm deep holes in structural members at the intervals of 600mm c/c in staggered manner or s directed by Engr-in Charge in RCC structure elements and cleaning the holes (to clean the holes by air blower prior to fixing nozzles) and fixing of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs) and cutting of nozzles (to cut the nozzle by chisel after completion of grouting without damaging structural elements etc complete.	40	Nos
71	71	Injecting low viscosity (3-5 cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories, till nozzles refuses to accept the grout, Including, Mixing of materials( Mixing material components (part a & b) in required quantities as per manufacturer’s instruction by weigh batching) and Grouting ( Filling the grouting gun with monomer. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (4 to 5 Kg/ Cm2) by monitoring pressure gauge at exit. Grouting the material through prefixed nozzles in the structural elements till its refusal. Sealing the nozzle with epoxy putty after the refusal. Monitoring leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process for all the nozzles. the operation to be within pot life of the material.)and Cleaning of gun and accessories ( the gun and accessories like valves, pipes and other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun.) etc. complete.	52	Kg
72	72	Providing and laying 20 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion of 1:5:15 by weight of polymer of approved make, cement and filler material of approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc. complete as directed by Engineer-In-Charge etc.	70	Sqm
73	73	Strengthening structural elements with non metallic composite fiber wrapping system comprise of uni-directional carbon fiber sheet (430 GSM) and compatible saturant Profiling: Applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic putty etc. complete Mechanized wetting of fiber sheet: Cutting the fabric to required size. Mixing of saturant and filling in tub area of the saturation machine. Placing the fiber on metallic rods and pass through the rollers of machine and saturant tub ensuring complete wetting (65% fiber volume fraction) of fibers. Remove the fiber on rod and place the new fiber sheet. Wrapping: Wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc. repeat the same procedure for multiple layer with the interval of 8 hrs. Second Coat: Applying second coat of saturant after min. 12 hrs, rectify air voids if any . (Mode of measurement: Per sq.mt of only surface area of carbon fiber sheet without lapping).	10	Sqm
74	74	Providing and fixing carbon fiber anchor including drilling hole in the base concrete fixing the anchor using epoxy 50X55 system spreading the anchor fibers in star pattern including appication of saturant etc. complete.	50	Nos
75	75	Supply, installation testing and commissioning Air Cooled DX type Refrigeration system including air cooled condenser system with temperature indication, electrical supply controlls and connections suitable for 3 Phase Ac supply of capacity 5 x 80,000 btuh (including standby), temperature maintained from +2 deg C to 8 deg C and RH factor not more than 60% for 24 Hrs running with Non CFC Refrigerant including with complete all protective accessories, instruments, copper tube and MS mounting arrangement with Cycolpentane Blowing Agent PUF Panels of size 60mm with PCGI cladding on both sides for Room wall & Ceiling. [ For cold storage Room ]. Make: Bluestar Model No: RUAH08014 or Equivant in Voltas/Mitsubhishi/Daikin. Note:- The Rates are Inclusive of any kind of civil/fabrication works. Such as site requirement of Copper Piping (Hard), Cabling, Insulation, Refregirant, Control Panels, Commissioning charges,Expansion valve, copper fittings, Labour etc.	1	Each Job
76	76	Supply, installation, testing and commissioning Air Cooled DX type Refrigeration system including air cooled condenser system with temperature indicator, electrical, water supply controlls and connections suitable for 3 Phase Ac supply of capacity 4 x 80,000 btuh (including standby), temperature maintained from +8 deg C to 16 deg C and RH factor not more than 60% for 24 Hrs running with Non CFC Refrigerant complete all protective accessories, instruments, copper tube and MS mounting arrangement. [ For cool Room ] Make: Bluestar Model No: DSA1321 or Equivant in Voltas/carrier/Daikin. Note:- The Rates are Inclusive of any kind of civil/fabrication works. Such as site requirement of Copper Piping (Hard), Cabling, Insulation, Refregirant, Control Panels, Commissioning charges,Expansion valve, copper fittings, Labour etc.	1	Each Job
77	77	Taking down the existing old U/s duct and central Ac unit capacity of 2 x 12.5 TR complete system and handed over to AGE E/M Store at Kalina.	1	Job
78	78	Taking down the existing old U/s duct and central Ac unit capacity of 2 x 15 TR complete system and handed over to AGE E/M Store at Kalina.	1	Job
79	79	Supply & laying 35 sq mm 3.5 core, connecting and commissioning of LT under ground cable 1100 volts grade PVC insulated heavy duty electric cables with aluminium conductor including connecting with suitable size of cable glands lugs etc. laid in trenches or fixed on walls	25	RM
80	80	Supply & laying 50 sq mm 3.5 core, connecting and commissioning of LT under ground cable 1100 volts grade PVC insulated heavy duty electric cables with aluminium conductor including connecting with suitable size of cable glands lugs etc. laid in trenches or fixed on walls	25	RM
81	81	S&F vertical type distribution board, TPN 8 way with 200 Amps bus bar,double door suitable for TPN, 4 pole MCCB as incommer complete all as specified and directed. Make :- Legrand / L&T / ABB /Havells or Eqlt.	2	Each
82	82	S&F MCCB 4 pole 63 Amps, 415 Volts ,50 Hz ,with breaking capacity 16 KA fixed type, including all connections and testing complate all as directed. Make :- Legrand / L&T / ABB /Havells or Eqlt.	2	Each
83	83	S&F MCB TPN 40 Amp 10 KA rupturing cap 415 Volts. Make :- Legrand / L&T / ABB /Havells or Eqlt.	11	Each
84	84	M & L for Submain wiring complete with and including 4X 6 sq mm single core FR PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade drawn through suitable size of PVC Conduit and including accessories and fixed on walls and 2X4 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth wire complete all as specified & directed by Engr-In-Charge.	200	RM
85	85	M&L for earthing with GI plate 600mmx600mmx6mm thick, burried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level, connecting to GI plate with 32x6 mm GI earth strip upto 7.5 Mtr long from erth point to test point by means of bolts, nuts, check nuts, washers and provision of charcoal, salt etc including watering arrangement with 15 mm dia GI medium grade pipe, and 40mm dia GI pipe for protection of GI strip ,MS funnel, PCC chamber in cement concrete 1:3:6 type C1 and finished even and smooth without using extra cement, 50 mm thick RCC cover 1:2:4 type B1 including 10 mm dia deformed bars @100 mm c/c on both ways for full size of chamber complete all as per electrical plate No 5 including necessary excavation and earth work in any type of soil complete all as directed.	6	Each
86	86	Taking down carefully old unserviceable copper/aluminum point wiring(light,fan,socket or power) any type with bakelite sheets complete fittings such as switches, ceiling rose, pendants, regulators, sockets etc with and including making good to the disturbed surfaces and colour washing to be match with existing surface etc all as directed.	99	Points
87	87	M & L for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium protection stove enamelling rigid steel conduit as per IS 9537 (Part-II): 1981 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.	90	Point
88	88	M & L for point wiring except cable for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.	20	Point
89	89	M & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium protection stove enamelling rigid steel conduit as per IS 9537 (Part-II): 1981 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.	10	Point
90	90	M & L for point wiring with and including single core, fire retardant, PVC insulated and unsheathed stranded copper conductor cable 2.5 Sqmm 1100 volts grade drawn through and including suitable size PVC casing caping and accessories with 2.8mm thick laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 Sqmm fire retardent PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dully and making good to the disturbed surfaces of wall , floor, ceilling etc to match with existing surface complete all as directed .	10	Point
91	91	S&F Switch piano 5 Amps SP one way 230 volts flush type all as directed .	90	Each
92	92	S&F ceiling rose, surface bakelite, three terminals AC 230 volts all as directed .	90	Each
93	93	S&F lamp holder, insulated body, with back plate for batten fittings fixed on wall/ceiling complete all as specified.	5	Each
94	94	S&F switch socket combination 5 Amps, 5 pin multipurpose flush type, 230 volts all as directed .	30	Each
95	95	S&F switch socket combination 15 Amps, 6 pin multipurpose flush type, 230 volts all as directed .	10	Each
96	96	S&F PVC square block for fixing of lamp holder/ceilingrose/tube light fittng all as directed .	20	Each
97	97	S&F in Single phase (SPN) Double door - classic line MCB DB 8 way with 200 Amps rated bus bar 240 volt Cat No BESDC06. Make . Benlo, C&S, HPL, or equivalent.	1	Each
98	98	S&F in repair MCB SPN 6 to 32 Amps 240 volts, 50Hz, 10 KA rupturing capacity complete connection and testing complete.	2	Each
99	99	S&F in repair MCB SP 6 to 32 Amps 240 volts, 50Hz, 10 KA rupturing capacity complete connection and testing complete.	10	Each
100	100	M&L MS sunken box of size 100x100mm with 2.8mm thick laminated cover complete with and including making good to disturbed surface of wall all specified and directed.	15	Each
101	101	M&L MS sunken box of size 175x100mm with 2.8mm thick laminated cover complete with and including making good to disturbed surface of wall all specified and directed.	30	Each
102	102	M&L MS sunken box of size 200x300 mm with 2.8mm thick laminated cover complete with and including making good to disturbed surface of wall all specified and directed.	10	Each
103	103	Earthing complete with Galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with the top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to GI wire 8 mm by means of bolts, nuts, check nuts and washer made out of Galvanised iron and protected by 15mm bore light grade GI Pipe and connected to control board/ panel/equipment complete all as shown in electrical plate No.5 including necessary earth work and excavation in any type of soil and PCC 1:2:4 type B-1 chamber with CI cover complete all as specified and directed by Engineer-in-Charge.	20	Each
104	104	Supply, Fixing & connecting from ceiling rose with 3 core flexible copper wire of reqd length, LED 36W, 2x2 recess softline luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal all as directed. Make. Surya Roshini Ltd, Product code : SLE DS 36W 22R or equivallent make of CG/Philips.\n\n	90	Each
105	105	Taking down carefully old unserviceable lightning arrestor any type with complete fittings such as strips, Rod, etc with including making good to the disturbed Surface after repair/remove damage strips refixing the same Strip, rod all as directed by Engineer-In-Charge.	20	Each Job

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Maharashtra Tenders

Distribution and Conditioning Tenders

Air Conditioning Tenders

HVAC Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Special Repairs To Air Conditioner Plant And Cold Storage Room At Afmsd Kandivali Mumbai Under Ge North Santacruz, Ge North Santacruz-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Special Repairs To Air Conditioner Plant And Cold Storage Room At Afmsd Kandivali Mumbai Under Ge North Santacruz, Ge North Santacruz-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us