Construction Of Beat Office Building At Khairbani Beat Under Panighatta Range, Khairbani Beat Under Panighatta Range-West Bengal

TDR : 21768021

Tender Notice
BOQ

Expired

Khairbani Beat Under Panighatta Range , West Bengal

Tender Brief : Construction Of Beat Office Building At Khairbani Beat Under Panighatta Range

Document Fees
Refer document

EMD
₹ 19359.0 /-

Tender Value
₹ 9.67 Lakhs /-

Submission Date
27-09-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Beat Office Building at Khairbani Beat under Panighatta FMU/Range of Head, Kurseong DMU.
1	1	CIVIL WORK	BI01010001010000000000000515BI0100001112
2	1.01	Earth work in exavation of foundation trenches or drain, in all sorts of soil etc.	BI01010001010000000000000515BI0100001113	25.173	Cu. M
3	1.02	Earth work in filling in foundation trenches or plinth with good earth etc.	BI01010001010000000000000515BI0100001114	5.035	Cu. M
4	1.03	Filling in foundation or plinth by fine sand, for column footing, Plinth filling	BI01010001010000000000000515BI0100001115	13.501	Cu. M
5	1.04	Supplying and laying Polethene sheet (150gm/ sq.m) over damp proof course or below flooring of roof terracing or in foundation or in foundation trenches, for column footing, tie beam bottom.	BI01010001010000000000000515BI0100001116	32.909	Sq. M
6	1.05	Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand, Under floor	BI01010001010000000000000515BI0100001117	26.965	Sq. M
7	1.06	Cement Concrete with graded stone ballast 40mm size (Excluding shuttering) etc. With N.B. Vaariety stone metal 1:3:6 proportion.	BI01010001010000000000000515BI0100001118	4.49	Cu. M
8	1.07	Ordinary Cement Concrete (1:1.5:3) with graded stone chips (20 mm Nominal Size) excluding shuttering and reinforcement, if any, in ground floor as per relevent IS codes, Pakur Variety	BI01010001010000000000000515BI0100001119	20.002	Cu. M
9	1.08	Hire and labour charges for shuttering with centering etc. 25 mm to 30 mm shuttering without staging in foundation. Column footing, for Tie Beam	BI01010001010000000000000515BI0100001120	33.617	Sq. M
10	1.09	Hire and labour charges for shuttering with centering	BI01010001010000000000000515BI0100001121	92.603	Sq. M
11	1.1	Reinforcement for reinforced concrete work in all sorts of structure etc. Other than SAIL/TATA/RINL.	BI01010001010000000000000515BI0100001122	2.355	MT
12	1.11	Brick work with 1st Class bricks in cement mortar (1:6) in foundation and plinth, Step	BI01010001010000000000000515BI0100001123	4.738	Cu. M
13	1.12	Brick work with 1st Class bricks in cement mortar (1:6) in parapet wall	BI01010001010000000000000515BI0100001124	13.793	Cu. M
14	1.13	125 mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor, Parapet wall	BI01010001010000000000000515BI0100001125	32.354	Sq. M
15	1.14	10 mm thick cement sand plaster to wall ceiling etc (1:4)	BI01010001010000000000000515BI0100001126	28.267	Sq. M
16	1.15	15 mm thick cement sand plaster to wall (6:1)	BI01010001010000000000000515BI0100001127	147.096	Sq. M
17	1.16	15 mm thick cement sand plaster to wall (6:1)	BI01010001010000000000000515BI0100001128	164.088	Sq. M
18	1.17	Supplying, fitting & fixing 1st quality Ceramic Tiles in wall and floors to match with the existing work & 4 nos of key stones (10 mm) fixed with. A. (Floor) With sand cement mortar (1:4). B (Wall) With sand cement mortar (1:3)	BI01010001010000000000000515BI0100001129	5.845	Sq. M
19	1.18	With sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement & joint filling using white cement slurry.	BI01010001010000000000000515BI0100001130	29.463	Sq. M
20	1.19	Supplying and laying true to line and level vitrfied tiles of approved brand (size not less than 600m x 600mm x 10mm thcik) in floor, skirting etc, set in 20 mm sand cement mortar (1:4). (A) Deep Colour & White	BI01010001010000000000000515BI0100001131	28.977	Sq. M
21	1.2	Neat Cement Punning about 1.5 mm thcik in wall etc. Toilet	BI01010001010000000000000515BI0100001132	16.074	Sq. M
22	1.21	Wood work in door and window frame fitted and fixed complete etc.,(d) Sal:Local	BI01010001010000000000000515BI0100001133	0.079	Cu. M
23	1.22	Pannel Shutter of door and window as per design. 35 mm thick shutter with 19mm thick pannel. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak (D1)	BI01010001010000000000000515BI0100001134	2.398	Sq. M
24	1.23	Supplying, fitting and fixing in position approved PVC door frame (matt finish) made of extruded PVC multichamber hollow section etc.	BI01010001010000000000000515BI0100001135	9.9	RM
25	1.24	PVC door shutter 30 mm thcik: Supplying, fitting and fixing pvc door shutter of approved quality and shade in position etc	BI01010001010000000000000515BI0100001136	3.075	Sq. M
26	1.25	M.S. or W.I. ornamental grill of approved design etc. Grill weighing above 16kg/sq.m and above	BI01010001010000000000000515BI0100001137	2.725	Qntl
27	1.26	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Bottom frame W, W1	BI01010001010000000000000515BI0100001138	6.6	Mtr
28	1.27	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Top and Side frame W, W2	BI01010001010000000000000515BI0100001139	20.1	Mtr
29	1.28	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Shutter for all track window. Bottom and Top Member W, W1	BI01010001010000000000000515BI0100001140	13.2	Mtr
30	1.29	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Style side member W, W1	BI01010001010000000000000515BI0100001141	20.25	Mtr
31	1.3	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Interlock Member W, W2	BI01010001010000000000000515BI0100001142	20.25	Mtr
32	1.31	Labour charge for fabrication and installation of composite door, window, partitions made from annidized extruded alloy aluminium sections for the following units. Glazed aluminium sliding windows made of extruded and annodized alloy auminium sections, fabrication, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built. 3/4 track sliding window W, W1	BI01010001010000000000000515BI0100001143	8.91	Sq. M
33	1.32	Supllying PVC Rollers for sliding windows as per direction of Enginner in charge.	BI01010001010000000000000515BI0100001144	30	Nos
34	1.33	Supplying maruti lock (100 mm)	BI01010001010000000000000515BI0100001145	15	Pair
35	1.34	Supplying EPDM gasket of approved make and brand as per direction of Engineer in Charge. 'U' Shaped EPDM gasket for frames.	BI01010001010000000000000515BI0100001146	26.7	Mtr
36	1.35	Supplying bubble free float glass of approved make and brand confirming to IS: 2835-1987. 4mm thick coloured/tinted/smoke glass W, W1	BI01010001010000000000000515BI0100001147	8.91	Sq. M
37	1.36	Rendering surface of walls and ceiling with white cement base WATER PROOF wall putty of approved make & brand (1.5 mm thick). Qunatity same as 10 mm & 20 mm Plaster.	BI01010001010000000000000515BI0100001148	175.363	Sq. M
38	1.37	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface thoroughly.	BI01010001010000000000000515BI0100001149	175.363	Sq. M
39	1.38	Applying exterior grade Acrylic primer of approved quality amd brand on plastered or concrete surface old or new surface etc	BI01010001010000000000000515BI0100001150	164.088	Sq. M
40	1.39	Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty ( to be done under specific instruction of Superintending Engineer)	BI01010001010000000000000515BI0100001151	175.363	Sq. M
41	1.4	Protective and decorative Acrylic Exterior Emulsion Paint of Approved quality etc. Premium 100 % Acrylic Emulsion.	BI01010001010000000000000515BI0100001152	164.088	Sq. M
42	1.41	Priming one coat on timber or plastered surface with synthetic oil bound primer etc	BI01010001010000000000000515BI0100001153	11.466	Sq. M
43	1.42	Priming one coad on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc	BI01010001010000000000000515BI0100001154	15.143	Sq. M
44	1.43	Painting with best quality synthetic enamel paint of approved make and brand etc. on timber or Plastered Surface. Two Coats (with any shade except white)	BI01010001010000000000000515BI0100001155	11.466	Sq. M
45	1.44	Painting with best quality synthetic enamel paint of approved make and brand etc. on Steel or other metal surface. Two Coats (with any shade except white)	BI01010001010000000000000515BI0100001156	15.413	Sq. M
46	1.45	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (A) Single Socket 3m length. 110 mm	BI01010001010000000000000515BI0100001157	15	RM
47	1.46	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (B)Fittings (x) Bend 87.5° 110 mm	BI01010001010000000000000515BI0100001158	6	Each
48	1.47	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (ix)Bend 45° 110mm	BI01010001010000000000000515BI0100001159	2	Each
49	1.48	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (xvi) Pipe clip 110mm	BI01010001010000000000000515BI0100001160	12	Each
50	1.49	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. Door tee 110mm	BI01010001010000000000000515BI0100001161	2	Each
51	1.5	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. Vent Cowl 110mm	BI01010001010000000000000515BI0100001162	2	Each
52	1.51	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (xvii) W. C. Connector (150mm long) 125 x 110(W/WC Ring) 75 mm.	BI01010001010000000000000515BI0100001163	2	Each
53	1.52	Iron butt hinges of approved quality fitted and fixed with steel screws with ISI mark.(100mmx58mmx1.9mm)	BI01010001010000000000000515BI0100001164	14	Each
54	1.53	Anodised aluminium Aldrop/Sliding bolts of approved quality manufactured from extruded section confirming to IS specification (IS2681/66) fitted and fixed complete (250mmx16mm dia bolt)	BI01010001010000000000000515BI0100001165	2	Each
55	1.54	Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section confirming to IS 204/74 fitted and fixed with cadmium plated screws. 300mm long x 10mm dia bolt.	BI01010001010000000000000515BI0100001166	2	Each
56	1.55	Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section confirming to IS 204/74 fitted and fixed with cadmium plated screws. 200mm long x 12mm dia bolt.	BI01010001010000000000000515BI0100001167	2	Each
57	1.56	Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section confirming to IS 204/74 fitted and fixed with cadmium plated screws. 150mm long x 10mm dia bolt.	BI01010001010000000000000515BI0100001168	4	Each
58	1.57	Supplying, fitting & fixing Anodised Aluminium D-Type Handle of approved make etc. 100 mm grip 12mm dia rod	BI01010001010000000000000515BI0100001169	8	Nos
59	1.58	Door Stopper (Anodised aluminium)	BI01010001010000000000000515BI0100001170	2	Each
60	1.59	Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia RCC manhole cover (heavy type) of approved make supplied fitted and fixed in the 100 mm thick RCC (1:1.5:3) top slab with necessary fittings, 20mm thcik cement plaster (4:1) with neat cement finish to the internal surface and 15 mm thick cement etc. For 10 users. With Pakur Variety. (SAIL/TATA/RINL).	BI01010001010000000000000515BI0100001171	1	Each
61	1.6	Construction of circular soak well 2.5 mtrs deep in all types of sandy soils with dry brick work upto 1.6 mtre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick works etc. (SAIL/TATA/RINL).	BI01010001010000000000000515BI0100001172	1	Each
62	1.61	Construction Inspection pit to a depth of 1.5 metre (inside) 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thcik cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside etc. With Pakur Variety. (SAIL/TATA/RINL)	BI01010001010000000000000515BI0100001173	2	Each
63	1.62	Supplying fitting and fixing 10 litre porceling low-down cistern of approved make with either side or bottom inlet, isde overflow, brackets complete with all internal PVC fittings. White.	BI01010001010000000000000515BI0100001174	2	Each
64	1.63	Wash basin vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm x 75mm x 75mm wood blocks and CI brackets including two coats of painting of CI brackets. (550 mm x 400 mm size).	BI01010001010000000000000515BI0100001175	2	Each
65	1.64	Supplying, fitting and fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap.	BI01010001010000000000000515BI0100001176	2	Each
66	1.65	Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bip Cock short Body (Equivalent to Code No. 511 & Model-Tropical/Something special of ESSCO or similar Brand).	BI01010001010000000000000515BI0100001177	2	Each
67	1.66	Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock - 15 mm (Equivalent to Code No. 507 & model-Tropical/Something Special of ESSCO or similar brand.	BI01010001010000000000000515BI0100001178	2	Each
68	1.67	Supplying, fitting and fixing approved brand PVC Connector white flexible, with bolt ends coupling with heavy brass CP nut 15mm dia. 450mm long.	BI01010001010000000000000515BI0100001179	6	Each
69	1.68	Supplying, fitting and fixing bib cock or stop cock. Chromium plated angular Stop Cock with wall flange(Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).	BI01010001010000000000000515BI0100001180	6	Each
70	1.69	Supplying fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per IS 3438/1965 together with brass CP hinges. (450 mm x 300 mm)	BI01010001010000000000000515BI0100001181	2	Each
71	1.7	Supplying fitting and fixing Closet seat of approved make with lid and CP hinges, rubber buffer and brass screws complete. EWC. Plastic (hallow type) black.	BI01010001010000000000000515BI0100001182	2	Each
72	1.71	Supplying fitting and fixing towel rail with two brackets. CP. Over Brass. 25mm dia and 450 mm long	BI01010001010000000000000515BI0100001183	2	Each
73	1.72	Supplying, fitting and fixing approved brand 32 mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps. 750 mm long.	BI01010001010000000000000515BI0100001184	4	Each
74	1.73	Supplying, fitting and fixing flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm x 75 mm x 75 mm wooden blocks complete. 470 mm x 280 mm x 340 mm	BI01010001010000000000000515BI0100001185	2	Each
75	1.74	Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) confirming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part-I) wiith all necessary accessores special Viz. PVC Pipes 15mm	BI01010001010000000000000515BI0100001186	10	RM
76	1.75	Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) confirming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part-I) wiith all necessary accessores special Viz. PVC Pipes 20mm	BI01010001010000000000000515BI0100001187	12	RM
77	1.76	Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) confirming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part-I) wiith all necessary accessores special Viz. PVC Pipes 25 mm	BI01010001010000000000000515BI0100001188	17	RM
78	1.77	Supplying PVC water storage tank of approved quality with closed top with lid (Black) - Multilayer. 500 litre Capacity.	BI01010001010000000000000515BI0100001189	1	Each
79	1.78	Applying two coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent:4 water: 6 cement) as per Manufacturer's specification. Roof Slab	BI01010001010000000000000515BI0100001190	35.9	Sq. M
80	1.79	40 mm thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal sizw) with water proofing compund of approved brand. Roof treatment	BI01010001010000000000000515BI0100001191	44.478	Sq. M
81	1.8	Add Twelve Percent for GST	BI01010001010000000000000515BI0100001192	1	No.
82	1.81	Add One Percent for Cess	BI01010001010000000000000515BI0100001193	1	No.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Beat Office Building At Khairbani Beat Under Panighatta Range, Khairbani Beat Under Panighatta Range-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work: Construction of Beat Office Building at Khairbani Beat under Panighatta FMU/Range of Head, Kurseong DMU.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	CIVIL WORK	BI01010001010000000000000515BI0100001112
2	1.01	Earth work in exavation of foundation trenches or drain, in all sorts of soil etc.	BI01010001010000000000000515BI0100001113	25.173	Cu. M
3	1.02	Earth work in filling in foundation trenches or plinth with good earth etc.	BI01010001010000000000000515BI0100001114	5.035	Cu. M
4	1.03	Filling in foundation or plinth by fine sand, for column footing, Plinth filling	BI01010001010000000000000515BI0100001115	13.501	Cu. M
5	1.04	Supplying and laying Polethene sheet (150gm/ sq.m) over damp proof course or below flooring of roof terracing or in foundation or in foundation trenches, for column footing, tie beam bottom.	BI01010001010000000000000515BI0100001116	32.909	Sq. M
6	1.05	Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand, Under floor	BI01010001010000000000000515BI0100001117	26.965	Sq. M
7	1.06	Cement Concrete with graded stone ballast 40mm size (Excluding shuttering) etc. With N.B. Vaariety stone metal 1:3:6 proportion.	BI01010001010000000000000515BI0100001118	4.49	Cu. M
8	1.07	Ordinary Cement Concrete (1:1.5:3) with graded stone chips (20 mm Nominal Size) excluding shuttering and reinforcement, if any, in ground floor as per relevent IS codes, Pakur Variety	BI01010001010000000000000515BI0100001119	20.002	Cu. M
9	1.08	Hire and labour charges for shuttering with centering etc. 25 mm to 30 mm shuttering without staging in foundation. Column footing, for Tie Beam	BI01010001010000000000000515BI0100001120	33.617	Sq. M
10	1.09	Hire and labour charges for shuttering with centering	BI01010001010000000000000515BI0100001121	92.603	Sq. M
11	1.1	Reinforcement for reinforced concrete work in all sorts of structure etc. Other than SAIL/TATA/RINL.	BI01010001010000000000000515BI0100001122	2.355	MT
12	1.11	Brick work with 1st Class bricks in cement mortar (1:6) in foundation and plinth, Step	BI01010001010000000000000515BI0100001123	4.738	Cu. M
13	1.12	Brick work with 1st Class bricks in cement mortar (1:6) in parapet wall	BI01010001010000000000000515BI0100001124	13.793	Cu. M
14	1.13	125 mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor, Parapet wall	BI01010001010000000000000515BI0100001125	32.354	Sq. M
15	1.14	10 mm thick cement sand plaster to wall ceiling etc (1:4)	BI01010001010000000000000515BI0100001126	28.267	Sq. M
16	1.15	15 mm thick cement sand plaster to wall (6:1)	BI01010001010000000000000515BI0100001127	147.096	Sq. M
17	1.16	15 mm thick cement sand plaster to wall (6:1)	BI01010001010000000000000515BI0100001128	164.088	Sq. M
18	1.17	Supplying, fitting & fixing 1st quality Ceramic Tiles in wall and floors to match with the existing work & 4 nos of key stones (10 mm) fixed with. A. (Floor) With sand cement mortar (1:4). B (Wall) With sand cement mortar (1:3)	BI01010001010000000000000515BI0100001129	5.845	Sq. M
19	1.18	With sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement & joint filling using white cement slurry.	BI01010001010000000000000515BI0100001130	29.463	Sq. M
20	1.19	Supplying and laying true to line and level vitrfied tiles of approved brand (size not less than 600m x 600mm x 10mm thcik) in floor, skirting etc, set in 20 mm sand cement mortar (1:4). (A) Deep Colour & White	BI01010001010000000000000515BI0100001131	28.977	Sq. M
21	1.2	Neat Cement Punning about 1.5 mm thcik in wall etc. Toilet	BI01010001010000000000000515BI0100001132	16.074	Sq. M
22	1.21	Wood work in door and window frame fitted and fixed complete etc.,(d) Sal:Local	BI01010001010000000000000515BI0100001133	0.079	Cu. M
23	1.22	Pannel Shutter of door and window as per design. 35 mm thick shutter with 19mm thick pannel. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak (D1)	BI01010001010000000000000515BI0100001134	2.398	Sq. M
24	1.23	Supplying, fitting and fixing in position approved PVC door frame (matt finish) made of extruded PVC multichamber hollow section etc.	BI01010001010000000000000515BI0100001135	9.9	RM
25	1.24	PVC door shutter 30 mm thcik: Supplying, fitting and fixing pvc door shutter of approved quality and shade in position etc	BI01010001010000000000000515BI0100001136	3.075	Sq. M
26	1.25	M.S. or W.I. ornamental grill of approved design etc. Grill weighing above 16kg/sq.m and above	BI01010001010000000000000515BI0100001137	2.725	Qntl
27	1.26	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Bottom frame W, W1	BI01010001010000000000000515BI0100001138	6.6	Mtr
28	1.27	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Top and Side frame W, W2	BI01010001010000000000000515BI0100001139	20.1	Mtr
29	1.28	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Shutter for all track window. Bottom and Top Member W, W1	BI01010001010000000000000515BI0100001140	13.2	Mtr
30	1.29	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Natural White. 3-track sliding window. Style side member W, W1	BI01010001010000000000000515BI0100001141	20.25	Mtr
31	1.3	Supplying Profiles of required section made Aluminium Alloy Extrusion confirming ti IS:732-1983 and IS:1285-1975 Annodized (with required film thickness and specified colour/natural) matt finished confirming to IS:1868-1983 for fabrication of composite door, sliding and casement windows, Partitions, formed of basic sections. 10-12 Microm Thickness Annodizing film. Interlock Member W, W2	BI01010001010000000000000515BI0100001142	20.25	Mtr
32	1.31	Labour charge for fabrication and installation of composite door, window, partitions made from annidized extruded alloy aluminium sections for the following units. Glazed aluminium sliding windows made of extruded and annodized alloy auminium sections, fabrication, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built. 3/4 track sliding window W, W1	BI01010001010000000000000515BI0100001143	8.91	Sq. M
33	1.32	Supllying PVC Rollers for sliding windows as per direction of Enginner in charge.	BI01010001010000000000000515BI0100001144	30	Nos
34	1.33	Supplying maruti lock (100 mm)	BI01010001010000000000000515BI0100001145	15	Pair
35	1.34	Supplying EPDM gasket of approved make and brand as per direction of Engineer in Charge. 'U' Shaped EPDM gasket for frames.	BI01010001010000000000000515BI0100001146	26.7	Mtr
36	1.35	Supplying bubble free float glass of approved make and brand confirming to IS: 2835-1987. 4mm thick coloured/tinted/smoke glass W, W1	BI01010001010000000000000515BI0100001147	8.91	Sq. M
37	1.36	Rendering surface of walls and ceiling with white cement base WATER PROOF wall putty of approved make & brand (1.5 mm thick). Qunatity same as 10 mm & 20 mm Plaster.	BI01010001010000000000000515BI0100001148	175.363	Sq. M
38	1.37	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface thoroughly.	BI01010001010000000000000515BI0100001149	175.363	Sq. M
39	1.38	Applying exterior grade Acrylic primer of approved quality amd brand on plastered or concrete surface old or new surface etc	BI01010001010000000000000515BI0100001150	164.088	Sq. M
40	1.39	Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty ( to be done under specific instruction of Superintending Engineer)	BI01010001010000000000000515BI0100001151	175.363	Sq. M
41	1.4	Protective and decorative Acrylic Exterior Emulsion Paint of Approved quality etc. Premium 100 % Acrylic Emulsion.	BI01010001010000000000000515BI0100001152	164.088	Sq. M
42	1.41	Priming one coat on timber or plastered surface with synthetic oil bound primer etc	BI01010001010000000000000515BI0100001153	11.466	Sq. M
43	1.42	Priming one coad on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc	BI01010001010000000000000515BI0100001154	15.143	Sq. M
44	1.43	Painting with best quality synthetic enamel paint of approved make and brand etc. on timber or Plastered Surface. Two Coats (with any shade except white)	BI01010001010000000000000515BI0100001155	11.466	Sq. M
45	1.44	Painting with best quality synthetic enamel paint of approved make and brand etc. on Steel or other metal surface. Two Coats (with any shade except white)	BI01010001010000000000000515BI0100001156	15.413	Sq. M
46	1.45	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (A) Single Socket 3m length. 110 mm	BI01010001010000000000000515BI0100001157	15	RM
47	1.46	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (B)Fittings (x) Bend 87.5° 110 mm	BI01010001010000000000000515BI0100001158	6	Each
48	1.47	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (ix)Bend 45° 110mm	BI01010001010000000000000515BI0100001159	2	Each
49	1.48	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (xvi) Pipe clip 110mm	BI01010001010000000000000515BI0100001160	12	Each
50	1.49	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. Door tee 110mm	BI01010001010000000000000515BI0100001161	2	Each
51	1.5	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. Vent Cowl 110mm	BI01010001010000000000000515BI0100001162	2	Each
52	1.51	Supply of UPVC pip[es (B Type) & fittings conforming to Is-13592-1992. (xvii) W. C. Connector (150mm long) 125 x 110(W/WC Ring) 75 mm.	BI01010001010000000000000515BI0100001163	2	Each
53	1.52	Iron butt hinges of approved quality fitted and fixed with steel screws with ISI mark.(100mmx58mmx1.9mm)	BI01010001010000000000000515BI0100001164	14	Each
54	1.53	Anodised aluminium Aldrop/Sliding bolts of approved quality manufactured from extruded section confirming to IS specification (IS2681/66) fitted and fixed complete (250mmx16mm dia bolt)	BI01010001010000000000000515BI0100001165	2	Each
55	1.54	Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section confirming to IS 204/74 fitted and fixed with cadmium plated screws. 300mm long x 10mm dia bolt.	BI01010001010000000000000515BI0100001166	2	Each
56	1.55	Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section confirming to IS 204/74 fitted and fixed with cadmium plated screws. 200mm long x 12mm dia bolt.	BI01010001010000000000000515BI0100001167	2	Each
57	1.56	Anodised aluminium barrel/tower/socket bolt(full covered) of approved manufactured from extruded section confirming to IS 204/74 fitted and fixed with cadmium plated screws. 150mm long x 10mm dia bolt.	BI01010001010000000000000515BI0100001168	4	Each
58	1.57	Supplying, fitting & fixing Anodised Aluminium D-Type Handle of approved make etc. 100 mm grip 12mm dia rod	BI01010001010000000000000515BI0100001169	8	Nos
59	1.58	Door Stopper (Anodised aluminium)	BI01010001010000000000000515BI0100001170	2	Each
60	1.59	Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia RCC manhole cover (heavy type) of approved make supplied fitted and fixed in the 100 mm thick RCC (1:1.5:3) top slab with necessary fittings, 20mm thcik cement plaster (4:1) with neat cement finish to the internal surface and 15 mm thick cement etc. For 10 users. With Pakur Variety. (SAIL/TATA/RINL).	BI01010001010000000000000515BI0100001171	1	Each
61	1.6	Construction of circular soak well 2.5 mtrs deep in all types of sandy soils with dry brick work upto 1.6 mtre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick works etc. (SAIL/TATA/RINL).	BI01010001010000000000000515BI0100001172	1	Each
62	1.61	Construction Inspection pit to a depth of 1.5 metre (inside) 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thcik cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside etc. With Pakur Variety. (SAIL/TATA/RINL)	BI01010001010000000000000515BI0100001173	2	Each
63	1.62	Supplying fitting and fixing 10 litre porceling low-down cistern of approved make with either side or bottom inlet, isde overflow, brackets complete with all internal PVC fittings. White.	BI01010001010000000000000515BI0100001174	2	Each
64	1.63	Wash basin vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm x 75mm x 75mm wood blocks and CI brackets including two coats of painting of CI brackets. (550 mm x 400 mm size).	BI01010001010000000000000515BI0100001175	2	Each
65	1.64	Supplying, fitting and fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap.	BI01010001010000000000000515BI0100001176	2	Each
66	1.65	Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bip Cock short Body (Equivalent to Code No. 511 & Model-Tropical/Something special of ESSCO or similar Brand).	BI01010001010000000000000515BI0100001177	2	Each
67	1.66	Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock - 15 mm (Equivalent to Code No. 507 & model-Tropical/Something Special of ESSCO or similar brand.	BI01010001010000000000000515BI0100001178	2	Each
68	1.67	Supplying, fitting and fixing approved brand PVC Connector white flexible, with bolt ends coupling with heavy brass CP nut 15mm dia. 450mm long.	BI01010001010000000000000515BI0100001179	6	Each
69	1.68	Supplying, fitting and fixing bib cock or stop cock. Chromium plated angular Stop Cock with wall flange(Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).	BI01010001010000000000000515BI0100001180	6	Each
70	1.69	Supplying fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per IS 3438/1965 together with brass CP hinges. (450 mm x 300 mm)	BI01010001010000000000000515BI0100001181	2	Each
71	1.7	Supplying fitting and fixing Closet seat of approved make with lid and CP hinges, rubber buffer and brass screws complete. EWC. Plastic (hallow type) black.	BI01010001010000000000000515BI0100001182	2	Each
72	1.71	Supplying fitting and fixing towel rail with two brackets. CP. Over Brass. 25mm dia and 450 mm long	BI01010001010000000000000515BI0100001183	2	Each
73	1.72	Supplying, fitting and fixing approved brand 32 mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps. 750 mm long.	BI01010001010000000000000515BI0100001184	4	Each
74	1.73	Supplying, fitting and fixing flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm x 75 mm x 75 mm wooden blocks complete. 470 mm x 280 mm x 340 mm	BI01010001010000000000000515BI0100001185	2	Each
75	1.74	Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) confirming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part-I) wiith all necessary accessores special Viz. PVC Pipes 15mm	BI01010001010000000000000515BI0100001186	10	RM
76	1.75	Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) confirming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part-I) wiith all necessary accessores special Viz. PVC Pipes 20mm	BI01010001010000000000000515BI0100001187	12	RM
77	1.76	Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) confirming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part-I) wiith all necessary accessores special Viz. PVC Pipes 25 mm	BI01010001010000000000000515BI0100001188	17	RM
78	1.77	Supplying PVC water storage tank of approved quality with closed top with lid (Black) - Multilayer. 500 litre Capacity.	BI01010001010000000000000515BI0100001189	1	Each
79	1.78	Applying two coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent:4 water: 6 cement) as per Manufacturer's specification. Roof Slab	BI01010001010000000000000515BI0100001190	35.9	Sq. M
80	1.79	40 mm thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal sizw) with water proofing compund of approved brand. Roof treatment	BI01010001010000000000000515BI0100001191	44.478	Sq. M
81	1.8	Add Twelve Percent for GST	BI01010001010000000000000515BI0100001192	1	No.
82	1.81	Add One Percent for Cess	BI01010001010000000000000515BI0100001193	1	No.

Construction Of Beat Office Building At Khairbani Beat Under Panighatta Range, Khairbani Beat Under Panighatta Range-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us