Tribal Welfare Department-TWD has published Construction Of Capacity Building Centre At Assam Of Research For Tribals And Scheduled Castes For Tribal Museum And Conference Hall At Jawaharnagar Ghy. Submission Date for this Tender is 25-09-2019. Building Work Tenders in Guwahati Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of capacity building centre at Assam of Reasearch for Tribals and Scheduled castes for Tribal Museum and conference hall at Jawaharnagar Ghy for the year 2019-20. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 2 | REINFORCEMENT | item1 | ||
| 2 | 3 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | item2 | ||
| 3 | 4 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | item3 | ||
| 4 | 5 | (i) TMT Corrosion resistant steel (CRS) reinforcement bar | item4 | 313.76 | Qtl |
| 5 | 6 | PLYBOARD SHUTTERING (FORMWORK)\nProviding form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: | item5 | ||
| 6 | 7 | Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | item6 | 290.23 | Sqm |
| 7 | 8 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n | item7 | ||
| 8 | 9 | (a) For depth not exceeding 1.0M. | item8 | 283.56 | Sqm |
| 9 | 10 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.\n(a) Floors etc. upto 200mm in thickness. | item9 | 904.19 | Sqm |
| 10 | 11 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. | item10 | 80.35 | Sqm |
| 11 | 12 | Providing form work of 12mm thick Plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level.\n(a) Thickness not exceeding 200mm. | item11 | 103.45 | Rm |
| 12 | 13 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). (23.19+23.19)=Rs.46.38 | item12 | 1558.32 | Sqm |
| 13 | 14 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). (4.64+4.64)=Rs.9.28 | item13 | 103.45 | Rm |
| 14 | 15 | Providing scaffolding using L&T-Doka access scaffold system upto a height of 40m. supported by frames of timber H-beams, bracings including suitable couplers, pins, tower spindles and 2nd class timber plank platforms complete as specified and directed by the department. (measurement to be taken on elevation area of the building/ structure). | item14 | 655.43 | Sqm |
| 15 | 16 | REINFORCED CEMENT CONCRETE WORKS | item15 | ||
| 16 | 17 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\n | item16 | ||
| 17 | 18 | P) Using admixture, plasticiser etc \n | item17 | ||
| 18 | 19 | c) M25 grade concrete | item18 | 169.21 | Cum |
| 19 | 20 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | item19 | 169.21 | Cum |
| 20 | 21 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n | item20 | ||
| 21 | 22 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | item21 | 751.46 | Sqm |
| 22 | 23 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.\n(a) 112mm thick brick/ R.B wall | item22 | 751.46 | Sqm |
| 23 | 24 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nB) On fair side\nb) In cement mortar 1:4 | item23 | 2521.3 | Sqm |
| 24 | 25 | VITRIFIED TILES | item24 | ||
| 25 | 26 | A) ON FLOOR | item25 | ||
| 26 | 27 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\nb) Executive range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\n | item26 | ||
| 27 | 28 | i) Of size 800mmx800mm and above | item27 | 367.63 | Sqm |
| 28 | 29 | ANTISKID TILES\nProviding Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.\nVITRIFIED\nii)Executive range-1 (Sizes 600 mm x 300mm and above) | item28 | ||
| 29 | 30 | a) Nitco made (Oak Wood) | item29 | 119.6 | Sqm |
| 30 | 31 | 18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. | item30 | ||
| 31 | 32 | (i) Marwat Slab | item31 | 102.07 | Sqm |
| 32 | 33 | Extra for nosing in steps of red or white, fine dressed and rubbed with sand stone. | item32 | 96 | Sqm |
| 33 | 34 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | item33 | ||
| 34 | 35 | (i) Thickness = 1.5 mm thick | item34 | 2989.4 | Sqm |
| 35 | 36 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item35 | 2989.4 | Sqm |
| 36 | 37 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n\n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item36 | 2212.04 | Sqm |
| 37 | 38 | Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).\n\n(i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item37 | 2212.04 | Sqm |
| 38 | 39 | Finishing wall with two coats of acrylic emulsion exterior paint of approveed brand of required shade by thinning by adding water as per specification of manufacture after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. | item38 | ||
| 39 | 40 | c) Asian paint/Berger Paint/ICI paint/J & N paint/Nerolac | item39 | 583.77 | Sqm |
| 40 | 41 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade.\n\nc) Asian paint/Berger Paint/ICI paint/J & N paint/Nerolac | item40 | 583.77 | Sqm |
| 41 | 42 | Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.\nWith 5mm clear glass\n\n(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel)\n(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)\n\n(ii) 4-Panel with 5mm clear float glass | item41 | 107.35 | Sqm |
| 42 | 43 | Supplying and installing uPVC- Fixed Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent.\nWith 5mm clear glass | item42 | ||
| 43 | 44 | (a) Fixed window using uPVC sections of size 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm having 2.4mm thick wall for glass sash having reinforcement of 1.5mm thick in both frame & sash.\n(WINSTA KOMMERLING/ FINESTA/ ENCRAFT) | item43 | 20.43 | Sqm |
| 44 | 45 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. | item44 | ||
| 45 | 46 | (a) With sal wood | item45 | 1.47 | Cum |
| 46 | 47 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. \n\na) Decorative type face panel and block board core. | item46 | ||
| 47 | 48 | (ii) 35 mm thick . | item47 | 40.01 | Sqm |
| 48 | 49 | Providing and fixing 1st class local wood Hollock /Bonsum/ Gamari/ Sundi lining with butt joints including fitting and fixing with countersunk screws with the frame with complete (frame work to be measured and paid separately). \n\ni).12 mm thick.\n\na) Hollock | item48 | 38.88 | Sqm |
| 49 | 50 | Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled) for(Kitchen flateform with locker)\n\n(ii) Using Particle/Block board | item49 | ||
| 50 | 51 | b) With Teak wood particle board (19mm/20mm thick) | item50 | 13.01 | Sqm |
| 51 | 52 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).\na) Sliding door bolts. | item51 | ||
| 52 | 53 | (i) 300mmx16mm. | item52 | 5 | Each |
| 53 | 54 | a) Sliding door bolts.\n\n(ii) 250mmx16mm. | item53 | 2 | Each |
| 54 | 55 | b) Tower bolt \n\n(i)300mmx10mm | item54 | 28 | Each |
| 55 | 56 | b) Tower bolt \n\n(ii)250mmx10mm | item55 | 6 | Each |
| 56 | 57 | c) Door Handle\n\n(iii) 150 mm | item56 | 34 | Each |
| 57 | 58 | c) Door Handle\n\n(ii) 100 mm | item57 | 10 | Each |
| 58 | 59 | e) Butt hinge\n\ni) 125mm x 50mm x 4mm | item58 | 56 | Each |
| 59 | 60 | e) Butt hinge\n\niii) 100mm x 50mm x 4mm | item59 | 27 | Each |
| 60 | 61 | t) Door stopper with rubber dtipper | item60 | 16 | Each |
| 61 | 62 | Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department.\nA) Godrej | item61 | ||
| 62 | 63 | c) Heavy Duty Door Closer( size 180 mm x 65mm x 64mm) | item62 | 16 | Each |
| 63 | 64 | m) Mortice lock vertical type\n\nv) pin cylinder Mortise Lock Oliver/Matiz/Victoria -Godrej make | item63 | 6 | Set |
| 64 | 65 | Electricals | item64 | ||
| 65 | 66 | Curcuit wiring | item65 | ||
| 66 | 67 | Wiring for dwrawing sub-main line with pvc insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent make as approved by the deptt.) pvc conduit Berlia/AKG/Presision/Presto Plast/Polycab/MW ao equinalent make as approved by the deptt. including earth continuty in in surface recessed 20 mm dia. 20 mm thick heavy ISI marked IS:9537 part- III rigid pvc conduct wiring system.\n\nWith 2x2.5 sq.mm. Mm +earth continuity with 1x1.5 sq.mm. 20 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit. | item66 | 250 | Rm |
| 67 | 68 | With 2x4 sq.mm. Mm +earth continuity with 1x2.5 sq.mm. 20 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit. | item67 | 100 | Rm |
| 68 | 69 | With 2x6 sq.mm. Mm +earth continuity with 1x4 sq.mm. 25 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit. | item68 | 50 | Rm |
| 69 | 70 | With 2x10 sq.mm. Mm +earth continuity with 1x6 sq.mm. 25 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit. | item69 | 25 | Rm |
| 70 | 71 | Wiring to 5 a pin 6 amps plug point with 1.5 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible ……….. ……..p.v.c. conduit wiring system. When fitted on same board of light and fan. | item70 | 40 | Each |
| 71 | 72 | Wiring to 5 a pin 6 amps plug point with 1.5 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible ……….. ……..continuty with 1.5 sq.mm cable to third pin of the plug socket etc. as required complete. | item71 | ||
| 72 | 73 | Short point up to 3.00 metre length. | item72 | 10 | Each |
| 73 | 74 | Medium point up to 6.00 metre length. | item73 | 15 | Each |
| 74 | 75 | Long point up to 10.00 metre length. | item74 | 10 | Each |
| 75 | 76 | Wiring to 5/6 a pin 16 amps plug point with 4 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable to the mark IS-9537 Part-III.......... .... Make as approved by the deptt. | item75 | ||
| 76 | 77 | Short point up to 3.00 metre length. | item76 | 10 | Each |
| 77 | 78 | Medium point up to 6.00 metre length. | item77 | 14 | Each |
| 78 | 79 | Long point up to 10.00 metre length. | item78 | 6 | Each |
| 79 | 80 | Wiring light /fan/call bell point with 3x1.5 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible .......... ....equivalent Make as approved by the deptt.cieling rose etc. complete. | item79 | ||
| 80 | 81 | Short point up to 3.00 metre length | item80 | 25 | Each |
| 81 | 82 | Medium point up to 6.00 metre length. | item81 | 25 | Each |
| 82 | 83 | Long point up to 10.00 metre length. | item82 | 25 | Each |
| 83 | 84 | Modular Switch | item83 | ||
| 84 | 85 | Supplying including and fixing of following metal boxes for MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt. | item84 | ||
| 85 | 86 | 1-2 module type metal | item85 | 5 | Each |
| 86 | 87 | 3 module type metal | item86 | 5 | Each |
| 87 | 88 | 4-5 module type metal | item87 | 15 | Each |
| 88 | 89 | 6-8 module type metal | item88 | 12 | Each |
| 89 | 90 | 10 module type metal | item89 | 30 | Each |
| 90 | 91 | 12-16 module type metal | item90 | 5 | Each |
| 91 | 92 | 24 module type metal | item91 | 2 | Each |
| 92 | 93 | Supplying including and fixing of following front flate of suitch colour MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE complete as per directed of deptt. | item92 | ||
| 93 | 94 | 1 module | item93 | 5 | Each |
| 94 | 95 | 2 module | item94 | 5 | Each |
| 95 | 96 | 3 module | item95 | 15 | Each |
| 96 | 97 | 4 module | item96 | 12 | Each |
| 97 | 98 | 5 module | item97 | 30 | Each |
| 98 | 99 | 6 module | item98 | 5 | Each |
| 99 | 100 | 8 module | item99 | 2 | Each |
| 100 | 101 | 10 module | item100 | 30 | Each |
| 101 | 102 | 16 module | item101 | 5 | Each |
| 102 | 103 | 24 module | item102 | 2 | Each |
| 103 | 104 | Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt. | item103 | 20 | Each |
| 104 | 105 | Supplying with fitting fixing of 100 watt electronic modular fan speed controler 4-steps 2- module type MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt. | item104 | 35 | Each |
| 105 | 106 | Supplying including installation of socket outlet 6/16 Amp 3/5 pin combined shuttered complete MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt. | item105 | 34 | Each |
| 106 | 107 | Supplying including installation of socket outlet 6 Amp 3 pin combined shuttered complete MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (ZENCELO), including making necessary connection as per directed of deppartment. | item106 | 40 | Each |
| 107 | 108 | Supplying with fitting fixing of 16 Amp one way modular clip in switch MODEL RANGE, LEGRAND (MYLINC), ANKCHOR (ROMA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (OPAL), PHILIPS including making necessary connection as per directed of deppartment. | item107 | 12 | Each |
| 108 | 109 | Supplying with fitting fixing of 6 Amp one way modular clip in switch MODEL RANGE, LEGRAND (MYLINC), ANKCHOR (ROMA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (OPAL), PHILIPS including making necessary connection as per directed of deppartment. | item108 | 200 | Each |
| 109 | 110 | Supplying with fitting fixing of 20 Amp one way modular clip in switch MODEL RANGE, LEGRAND (MYLINC), ANKCHOR (ROMA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (OPAL), PHILIPS, Havells including making necessary connection as per directed of deppartment. | item109 | 100 | Each |
| 110 | 111 | Supplying with fitting, fixing sheet steel, phosphatised, powder painted dust & vermin proof double door …………. . …..necessary connection as approved specified and directed by the deptt.)\n\nSchneider neo break, C&S Havels…… …as approved by the deptt. | item110 | ||
| 111 | 112 | 2 Way single door | item111 | 20 | Each |
| 112 | 113 | 4 Way single door | item112 | 20 | Each |
| 113 | 114 | Supplying with fitting, fixing sheet steel, phosphatised, powder painted dust & vermin proof double door IP-43 surface mounting SPN MCB DB…………. . …..as approved specified and directed by the deptt.) \n\nABB, Schneider MG, legrannd, Hager make | item113 | ||
| 114 | 115 | 4 Way SPN double door | item114 | 15 | Each |
| 115 | 116 | 12 Way SPN double door | item115 | 10 | Each |
| 116 | 117 | Supplying with fitting and fixing MCCB incorner and MCB out going sheet steel, phosphatised, powder painted dust & vermin proof double door IP-43 surface mounting vertical TPN MCB DB…………. . …..as approved specified and directed by the deptt.) | item116 | ||
| 117 | 118 | ABB, Schneider MG, legrannd, Hager make | item117 | ||
| 118 | 119 | 4 Way TPN (4+12) double door | item118 | 4 | Each |
| 119 | 120 | 8 Way TPN (4+128 double door | item119 | 2 | Each |
| 120 | 121 | Supplying with fitting and fixing single pole 10 KA 240/415V 50Hz MCB of the following capacity complete with …………. . …..as approved specified and directed by the deptt.) \n\nC Series (Schneider MG, legrannd, Hager make) | item120 | ||
| 121 | 122 | 6 to 32 A | item121 | 40 | Each |
| 122 | 123 | 40 A | item122 | 25 | Each |
| 123 | 124 | Supplying with fitting and fixing DB 10 KA 240/415V 50Hz MCB of the following capacity complete with …………. . …..as approved specified and directed by the deptt.) \n\nC Series (Schneider MG, legrannd, Hager make) | item123 | ||
| 124 | 125 | 6 to 32 A | item124 | 10 | Each |
| 125 | 126 | 40 A | item125 | 10 | Each |
| 126 | 127 | 63 A | item126 | 10 | Each |
| 127 | 128 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz MCB of the following capacity complete with …………. . …..as approved specified and directed by the deptt.) \n\n100/300mA sensitivity DP RCCB\n\n | item127 | ||
| 128 | 129 | 25 A | item128 | 2 | Each |
| 129 | 130 | 40 A | item129 | 2 | Each |
| 130 | 131 | Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 4P MCB without encloser of the following capacity complete with …………. . …..as approved specified and directed by the deptt.) \n\n25 KA 415V 50Hz 4P MCB (Schneider MG, legrannd, Hager make) | item130 | ||
| 131 | 132 | 63 A | item131 | 1 | Each |
| 132 | 133 | Sleek channel type luminuries complete with top cover & decorative dual colour end caps and with electronic ballast with 1x36 watt fluorecent tube (crompton greaves make) Model -DJB 1314LDB50 ………………… …… ……The mother item rate) PHILIS / WIPRO / BAJAJ / Havells / HPL / SOLAR / JAQUAR make. | item132 | 35 | Each |
| 133 | 134 | Striplite luminaries complete with electronic ballast and decorated with end cap with 1 x 36 / 40 watt fluorecent tube. (crompton greaves make) model DSG1214ED ENERGYDOLD with power lux lamp or equivalent (equivalent will be selected by the deptt. comsidering the mother items rate) PHILIS / WIPRO / BAJAJ / Havells / HPL / SOLAR / JAQUAR make. | item133 | 20 | Each |
| 134 | 135 | Supplying including fitting and fixing of following A.C. ceiling fan with all accessories like down rod canopy etc. of following sweeps with making necessary connection as approved by the deptt. As required comlpete and as directed by the deptt. (without regulator). | item134 | ||
| 135 | 136 | Primeum model 1200 mm sweeps (OREINT / PSPO / make) Premiun model 1050 / 1200 mm sweeps SS-390 Deco (Havells make). | item135 | 8 | Each |
| 136 | 137 | SANITARY WORKS | item136 | ||
| 137 | 138 | INDIAN TYPE WATER CLOSET\n\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)\n\nIndian type W.C Orissa pattern of size 580 x 440 mm | item137 | ||
| 138 | 139 | (a) White | item138 | ||
| 139 | 140 | ii) Hindware make | item139 | 2 | Each |
| 140 | 141 | EUROPEAN TYPE WATER CLOSET\n\nProviding fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\n\nA) Parryware make\n\n (a) White | item140 | ||
| 141 | 142 | (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover) | item141 | 2 | Each |
| 142 | 143 | WASH BASIN\n\nProviding vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\n\n PEDESTAL BASIN (with pedestal)\n\n(A) Parryware Make\n\n(a) White\n\n | item142 | ||
| 143 | 144 | (iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380) | item143 | 3 | Each |
| 144 | 145 | MIRROR\n\nProviding fitting and fixing Decorative Mirror complete as directed and specified.\n\n(A) Parryware Make \n\n(b) Size 600mm x 450mm | item144 | 3 | Each |
| 145 | 146 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.\n\n(i) Jaquar Make\n\n(b) Queen's (Cat.No.AQN-7731) | item145 | 5 | Each |
| 146 | 147 | TOWEL RAIL,TOWEL RACK & TOWEL RING\n\nProviding, fitting and fixing CP towel rail complete as directed and specified.\n\n(a) Jaquar make \n\n(ii) Continental 600mm (Cat.No. ACN-1111N) | item146 | 4 | Each |
| 147 | 148 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\n\ni) Parryware make\n\na) White\n\n(i)Economy Single Flush (Cat No.C8090/C8055)\n\n | item147 | 4 | Each |
| 148 | 149 | PVC PIPES, BENDS, JUNCTIONS, TEES ETC.\nSupplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \n\na) In exposed surfaces or in trenches. | item148 | ||
| 149 | 150 | (ii) 110mm dia. | item149 | 90 | Rm |
| 150 | 151 | (iv) 75mm dia. | item150 | 75 | Rm |
| 151 | 152 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. \n\na) In exposed surfaces or in trenches. \n\n(ii) 110mm dia. | item151 | 15 | Each |
| 152 | 153 | (iv) 75mm dia. | item152 | 7 | Each |
| 153 | 154 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n\na) In exposed surfaces or in trenches. | item153 | ||
| 154 | 155 | (ii) 110mm dia. | item154 | 11 | Each |
| 155 | 156 | (iv) 75mm dia. | item155 | 7 | Each |
| 156 | 157 | Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n\na) In exposed surfaces or in trenches. | item156 | ||
| 157 | 158 | (ii) 110mm dia. | item157 | 9 | Each |
| 158 | 159 | (iv) 75mm dia. | item158 | 5 | Each |
| 159 | 160 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified\n\n(ii) 110mm dia. PVC cowel of ISI make | item159 | 2 | Each |
| 160 | 161 | C.P. Grating .\n\n(ii) 110mm dia\n\n | item160 | 2 | Each |
| 161 | 162 | WATER SUPPLY | item161 | ||
| 162 | 163 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified.\n(A) Exposed on walls | item162 | ||
| 163 | 164 | b) 40 mm dia (Medium)\n\ni) Using Tata make | item163 | 75 | Rm |
| 164 | 165 | d) 25 mm dia (Medium)\n\ni) Using Tata make | item164 | 55 | Rm |
| 165 | 166 | BIB COCK\nSupplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \n\nEssco make (Delux/Sumthing spl./Tropical) | item165 | ||
| 166 | 167 | (b) Long body bib cock with wall flange | item166 | 4 | Each |
| 167 | 168 | (c) Two way long body bib cock with wall flange | item167 | 2 | Each |
| 168 | 169 | STOP COCK\n\nSupplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n\nLauret Brand | item168 | ||
| 169 | 170 | (a)Angular stop-cock with wall flange | item169 | 4 | Each |
| 170 | 171 | PILLAR COCK\n\nSupplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n\nJaguar make | item170 | ||
| 171 | 172 | (b)Long neck with areator | item171 | 3 | Each |
| 172 | 173 | SHOWER\n\nSupplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) | item172 | ||
| 173 | 174 | (b)Apex/Kiran/Priya/Star/RimZim/Bugle shower with arm | item173 | 2 | Each |
| 174 | 175 | WATER TANK\n\nSupplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n\n1000 litre capacity | item174 | ||
| 175 | 176 | (a) Sintex make | item175 | 3 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
