Military Engineer Services-MES has published Repair Maintenance Of Rusted Ci Gi Di Pipe Line Pump Motor Cleaning Of Rcc Tank And Allied Works At Sdo Muzaffarpur Under Ge Danapur Cantt. Submission Date for this Tender is 20-09-2019. Cleaning Work Tenders in DANAPUR CANTT Bihar. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR/MAINT OF RUSTED CI/GI/DI PIPE LINE, PUMP, MOTOR, CLEANING OF RCC TANK AND ALLIED WORKS AT SDO MUZAFFARPUR UNDER GE DANAPUR CANTT | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | M&L for cleaning of cap 20000 Gallons RCC over head tanks inside dome i.e. bottom & wall of cone 18 mtr to 21 mtr staging by De-watering by using wash out pipe line, Scrapping sludge and removal the same through washout pipe line, applying wall putty in damaged portion and painting the inside area with two coat of white cement based paint and writing date of cleaning of tank and capacity of tank with white paint on black base as specified and directed. | BI01010001010000000000000515BI0100001113 | 1 | Each\nJob |
| 2 | 2 | M&L for construction of valve pit chamber of size 1200x1200x 1200mm internal dimension , 6m thick MS steel cover with 2 Nos MS hinger suitable size welded with angle iron frame of 40x40x6mm thick with lifting hooks and locking arrangement complete with necessary earth work, brick work in cm (1:6), 150 mm thick PCC bed (1:4:8) type D-2, 15mm thick cement plaster in cm 1:4 internal surface complete and external surface of wall up to 300 mm front top and applying a coat of black bituminous point to the steel surface complete as shown on TDDrg CEJZ/ TD/ 819 /91 Sheet 1/1 dated 16.04.91 incl demolition and removal of old U/S valve pit all as specified and directed. | 1 | Each\nJob | |
| 3 | 3 | Supply, laying, connecting & testing, Ductile iron pipes class K-9 confirming to IS-8329(2000) with spigot & socket ends in any length suitable for push on joint (rubber gasket tyton joint) of size 150 mm bore complete all as specified & directed including taking out unservicable CI pipes. | 75 | RM | |
| 4 | 4 | ------Ditto-----all as per item No 3 above but 100 mm bore | 180 | RM | |
| 5 | 5 | M&L DI fittings such as bends, tapers, Tee piece, collars, caps, plugs, tail piece etc( any type, radius, angle) of socket and spigot ends or all socketed suitable for 80 to 150 mm bore complete all as specified and directed. | 60 | Kg | |
| 6 | 6 | M&L rubber gasket joint suitable for spigot and socketed pipe of size 150 mm bore complete all as specified and directed. | 15 | Each | |
| 7 | 7 | Ditto-----all as per item No 6 above but 100 mm bore | 9 | Each | |
| 8 | 8 | S&F in replacement of submersible cable of size 3 core 16 sqmm PVC sheathed and insulated stranded copper conductor from motor to starter all as directed. | 124 | RM | |
| 9 | 9 | S&F in replacement of pressure gauge dial type of suitable capacity with gun metal stop cock of suitable size & capacity complete as directed. | 1 | Each | |
| 10 | 10 | S&F in replacement of Cast iron sluice valve heavy duty class PN-1 flanged both grands with high tensile brass /Gun metal spindle nut for 80 mm bore pipe incl jointing with rubber insertion joints bolts nuts and washer complete all as per IS-780 latest edition and as directed. | 1 | Each | |
| 11 | 11 | S&F in replacement of cast iron non return valve heavy duty both ends flanged , ISI marked, cap top, nuts, bolts, washers including 3 mm thick rubber gasket joints etc suitable for 80 mm bore pipe complete as per IS 1512 (Part-I) all as specified and directed. | 1 | Each | |
| 12 | 12 | Taking up or down steel water tubing and connections of the following sizes:-( Note:- Excavation and earth work shall be measured and paid for seperately) | |||
| 13 | 12.01 | (a) 80 mm bore. | 30 | RM | |
| 14 | 12.02 | (b) 40 or 50 mm bore | 120 | RM | |
| 15 | 12.03 | (c) 25 mm bore | 50 | RM | |
| 16 | 12.04 | (d) 20 mm bore | 150 | RM | |
| 17 | 12.05 | (e) 15 mm bore | 150 | RM | |
| 18 | 13 | M&L for GI Pipe medium grade with all necessary fittings such as bend, elbow, socket, tee, Union, Reducer socket etc laid in trenchs including making connection to existing GI tubing complete all as specified and directed for the following sizes :- | |||
| 19 | 13.01 | (a) 80 mm bore. | 30 | RM | |
| 20 | 13.02 | (b) 50 mm bore | 80 | RM | |
| 21 | 13.03 | (c) 40 mm bore | 40 | RM | |
| 22 | 13.04 | (d) 25 mm bore | 50 | RM | |
| 23 | 13.05 | (e) 20 mm bore | 150 | RM | |
| 24 | 13.06 | (f) 15 mm bore | 150 | RM | |
| 25 | 14 | Taking out unserviceable submersible pump of capacity 12.5 to 20 HP from bore well including column pipes, (upto 50 mtr depth) submersible cable, steel rope and accessories etc and re-lowering of pump after necessary repair including connecting of submersible pump and motor of straight through joint of submersible cable 35 Sq mm 3 core with jointing kit compound etc testing complete all as directed . | 5 | Each | |
| 26 | 15 | Opening of submersible pump of capacity 20 HP, examine all parts, taking off worn out components/parts as in replacement of following with new one including testing complete all as directed.\nNote:- (i) All unserviceable spare parts shall be measured and paid for separately on supply only.\n(ii) The cost of fixing of all components/parts shall be deemed to be included in unit quoted rate | 3 | Each | |
| 27 | 16 | Supply only the following items of submercible pump capacity 20 HP :- | |||
| 28 | 16.01 | (a) Gun metal neck ring. | 3 | Each | |
| 29 | 16.02 | (b) Gun metal bush. | 9 | Each | |
| 30 | 16.03 | (c) Gun metal sockets. | 10 | Each | |
| 31 | 16.04 | (d) Gun metal body hausing bush. | 9 | Each | |
| 32 | 16.05 | (e) steel guide bush. | 9 | Each | |
| 33 | 16.06 | (f) Nuts,Bolts and washer complete. | 150 | Each | |
| 34 | 16.07 | (g) Gun metal neck ring. | 6 | Each | |
| 35 | 16.08 | (h) Gun metal neck ring. | 6 | Each | |
| 36 | 16.09 | (j) Mild steel stud bolts and washers suitable for 20 HP. | 130 | Each | |
| 37 | 17 | Opening of submersible pump of capacity 12.5 HP, examine all parts, taking off worn out components/parts as in replacement of following with new one including testing complete all as directed.\nNote:- (i) All unserviceable spare parts shall be measured and paid for separately on supply only.\n(ii) The cost of fixing of all components/parts shall be deemed to be included in unit quoted rate | 2 | Each Job | |
| 38 | 18 | Supply only the following items of submercible pump capacity 12.5 HP :- | |||
| 39 | 18.01 | (a) Gun metal neck ring. | 2 | Each | |
| 40 | 18.02 | (b) Gun metal bush. | 6 | Each | |
| 41 | 18.03 | (c) Gun metal sockets. | 6 | Each | |
| 42 | 18.04 | (d) Gun metal body hausing bush. | 6 | Each | |
| 43 | 18.05 | (e) steel guide bush. | 9 | Each | |
| 44 | 18.06 | (f) Nuts,Bolts and washer complete. | 130 | Each | |
| 45 | 18.07 | (g) Gun metal neck ring. | 4 | Each | |
| 46 | 18.08 | (h) Gun metal neck ring. | 2 | Each | |
| 47 | 18.09 | (j) Mild steel stud bolts and washers suitable for 20 HP. | 75 | Each | |
| 48 | 19 | M&L for rewinding of 20 HP submersible electric motor of any make with PVC insulated super enameled copper wire not less than the original one complete with replacement of wornout parts such as thrust plate, thrust bearing and motor coupling etc and opening of motor for rewinding, reassembling after rewinding of motor including painting of motor with one coat of epoxy paint after preparation of old painted surfaces and testing complete all as directed . | 3 | Each Job | |
| 49 | 20 | All as per item No 19 here in before but 12.5 HP complete all as directed | 2 | Each Job | |
| 50 | 21 | M&L for lath work including all materials as required for re-metaling of impellers, polishing, turning of pump shaft, welding, facing of impellers of submersible pumps capacity 20 HP complete all as specified and directed. | 3 | Each | |
| 51 | 22 | M&L for lath work including all materials as required for re-metaling of impellers, polishing, turning of pump shaft, welding, facing of impellers of submersible pumps capacity 12.5 HP complete all as specified and directed. | 2 | Each | |
| 52 | 23 | Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including trimming the sides and forming bottom surface to required levels for laying pipes complete all as specified. | 120 | Cum | |
| 53 | 24 | Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed | 100 | Cum | |
| 54 | 25 | Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete as directed | 20 | Cum | |
| 55 | 26 | Supply only Calcium Hypo Chlorite having 65% - 70% Chlorine cement (Calcium based granular disinfectant) for general water treatment and swimming pool water treatment in factory sealed container / drum (45 KG packing) complete all as specified and directed.\n | 2 | Each Pkt 45 Kg | |
| 56 | 27 | S&F in repair of 500 Ltr capacity rotational moulded polyethylene water storage tanks in three layers cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed. | 5 | Each | |
| 57 | 28 | S & F in repair PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed by Engr-in-charge.\nMake- Prayag/Polytuff. | 10 | Each | |
| 58 | 29 | S&F Sluice valve, class PN-I.6 coforming to IS-14846 heavy duty with flanged end and brass spindle, and rubber gasket 3 mm thick, MS nut bolts and washer for fixing of sluice valve including cutting of existing GI/CI water pipe line to fix the sluice valve at the location and jointing with existing water mains including taking out old unserviceable sluice valve complete all as directed for the following sizes. \n\n | |||
| 59 | 29.01 | (a) 100 mm bore. | 1 | Each | |
| 60 | 29.02 | (b) 150 mm bore | 1 | Each | |
| 61 | 31 | S&F Ventury valve, class PN-I , heavy duty with flanged end and brass spindle, and rubber gasket 3 mm thick, MS nut bolts and washer for fixing of sluice valve including cutting of existing GI/CI water pipe line to fix the sluice valve at the location and jointing with existing water mains including taking out old unserviceable sluice valve complete all as directed\n\n | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
