Sales : +91-777 804 8217
| Name of Work: Construction of Auditorium at Baihata Chariali under Nagaon G.P. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | EARTHWORK IN EXCAVATION\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. \n(a) In ordinary soil | item1 | 135.4 | Cum |
| 2 | 2 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item2 | 400 | Cum |
| 3 | 3 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.\n(b) Other than Guwahati city | item3 | 1500 | Cum |
| 4 | 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) .(a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item4 | 15.37 | Cum |
| 5 | 5 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item5 | 58.97 | Sqm |
| 6 | 6 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)\n(I) Using Mixer Machine.\n(A) In substructure up to plinth level\nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. \nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item6 | 72.61 | Cum |
| 7 | 7 | (B) In super structure from plinth level up to 1st floor level.\nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. \nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item7 | 96.6 | Cum |
| 8 | 8 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: \n3.1.1.1 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (a) Using 38mm thick plank | item8 | 186.44 | Sqm |
| 9 | 9 | 3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. \n(a) Using 38mm thick plank | item9 | 224.66 | Sqm |
| 10 | 10 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:\n3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | item10 | 240.54 | Sqm |
| 11 | 11 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n(a) For depth not exceeding 1.0M. | item11 | 364.22 | Sqm |
| 12 | 12 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. \n(a) Floors etc. upto 200mm in thickness. | item12 | 45.72 | Sqm |
| 13 | 13 | Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. | item13 | 22.44 | Sqm |
| 14 | 14 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a).Brick on flat soling. | item14 | 820.74 | Sqm |
| 15 | 15 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. \n(I) In Sub-structure upto plinth level including dewatering if necessary\n(b) In proportion 1:4. | item15 | 56.86 | Cum |
| 16 | 16 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | item16 | 444.2 | Sqm |
| 17 | 17 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | item17 | 488.48 | Sq.m |
| 18 | 18 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. \n(a) 15 mm thick | item18 | 110.32 | Sq.m |
| 19 | 19 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).\nb) Executive range\nSomany/ Orient/Nitco/Asian Make \ni) Of size 200mmx300mm and above | item19 | 19.53 | Sq.m |
| 20 | 20 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC\nii)Executive range-1 (Sizes 400 mm x 400mm and above)\n(a) Somany made- VC Shield (Group- 25) (406x406) mm Deluxe -VC | item20 | 64.64 | Sq.m |
| 21 | 21 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3 | item21 | 120.44 | Sqm |
| 22 | 22 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nB) On fair side\nb) In cement mortar 1:4 | item22 | 984.25 | Sqm |
| 23 | 23 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick)\nb) In cement mortar 1:4 | item23 | 840.5 | Sqm |
| 24 | 24 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. \na) On Single coat plaster | item24 | 450.48 | Sqm |
| 25 | 25 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. \nCeiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (ii) 12.5mm thick\n | item25 | 106.4 | Sqm |
| 26 | 26 | Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. \nFinally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. \n(A) Standard Ceilings of Everest make or equivalent as directed by the departement (i) Using 4 mm thick FC Board | item26 | 374.618 | Sqm |
| 27 | 27 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | item27 | 562.46 | Sqm |
| 28 | 28 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(ii) 0.50 mm thick | item28 | 29.44 | RM |
| 29 | 29 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood | item29 | 0.86 | Cum |
| 30 | 30 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | item30 | 130.2 | R.M. |
| 31 | 31 | Providing and fixing 1st class timber moulded beading of size 25mm x 15mm around panel inserts of doors with countersunk wood screws including applying a coat of wood preservative on unexposed surface. \n(a)With Teak wood/Sissu wood. | item31 | 143.5 | R.M. |
| 32 | 32 | Providing and fixing 1st class timber beading for fixing clear sheet glass/ frosted glass including applying a coat of wood preservative on unexposed surface. \n(a)With Teak wood/Sissu wood. | item32 | 35.31 | R.M. |
| 33 | 33 | Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) \nA) With Teak wood / Sissu wood. \n(ii) 35 mm thick. | item33 | 19.88 | Sq.m. |
| 34 | 34 | Providing, fitting and fixing Natural Fibre Thermosets Composite of jute, polymer and chemicals, Durosam make door/ window shutters fixed to the door/ window frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door/ window fixtures and fittings to be measured and paid seperately.) (a) Solid Core moulded/ Fabricated/ Panelled/ Glazed Doors | item34 | 4.2 | Sq.m. |
| 35 | 35 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.\nII Ornamental grill\n(c) Fixed to Brickwork/P.C.C/R.C.C. | item35 | 1430.2 | Kg |
| 36 | 36 | Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a)Side hung and Top hung windows and ventilators\n(ii)5mm frosted glass | item36 | 28.5 | Sqm |
| 37 | 37 | Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.\n(a ) 2 Track sliding window \n(ii)5mm frosted glass | item37 | 9.25 | Sqm |
| 38 | 38 | Providing, fitting and fixing PVC door frame of Duroplast make DPF-5060 make suitable for DPS-3720 made from extruded PVC multichamber hollow section having dimensions of 50mmx60mm (Toletance + 1mm). Horizontal and vertical sections shall be joined by steel screws after inserting M.S. tubular rectangular galvanised L-shaped brackets of size 100mmx100mm or plastic brackets of size 75mmx75mm with metred cut at the corners. Hinge side of the frame shall be reinforced with M.S.Tubular section of size 40mmx20mm. The frame will be fixed to the column/ stiffner/ wall with the help of 3 nos 75mm long and 4mm dia steel screws and expandable fastners on each side of the door frame complete in all respects as sepcified and directed at all levels. | item38 | 20 | Rm |
| 39 | 39 | Providing, fitting and fixing PVC Door shutters of Duroplast DPS 3720 make made fromm extruded PVC stiles and rails made from rigid PVC multicavity hollow chamber section of size 90mmx37mm (Toletance+ 1mm). The corners of the stiles and rails shall be metred out and fixed to each other with the help of solid plastic L-shaped brackets or M.S. rectangular tubular galvanised two nos of size 200mmx100mm and 100mmx100mm at each corner by self tapping steel screws. PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filled with PVC panels of approved colour of size 100mmx20mm. Then two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all complete as specified and directed at all levels. (Door fixtures and fittings to be measured and paid seperately) | item39 | 6.72 | Sqm |
| 40 | 40 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item40 | 35.17 | Sqm |
| 41 | 41 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)\n(i) Thickness = 1.5 mm thick | item41 | 1698.64 | Sqm |
| 42 | 42 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item42 | 1500.2 | Sqm |
| 43 | 43 | Extra over item no 13.4.7 above for painting with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof. (i).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item43 | 520.1 | Sqm |
| 44 | 44 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. \n(a). With ready mixed paint , Wood primer (pink) | item44 | 12.48 | Sqm |
| 45 | 45 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. \n(i).Surfaces over 100mm in width or girth.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item45 | 12.48 | Sqm |
| 46 | 46 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\na). With ready mixed \"red-lead/ red oxide\" primer. | item46 | 120.42 | Sqm |
| 47 | 47 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. \n(i).Surfaces over 100mm in width or girth.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item47 | 120.42 | Sqm |
| 48 | 48 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item48 | 510.66 | Sqm |
| 49 | 49 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). \na) Sliding door bolts\ni) 300mm x 16mm | item49 | 15 | Each |
| 50 | 50 | b) Tower bolts\ni) 300mm x 10mm | item50 | 30 | Each |
| 51 | 51 | c) Door handles \niii) 150mm | item51 | 18 | Each |
| 52 | 52 | e) Butt hinge \niii) 100mm x 40mm x 2.5mm | item52 | 30 | Pair |
| 53 | 53 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately)\n(2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2.\n(c). 5.00mm thick. | item53 | 49.9 | Sqm |
| 54 | 54 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)\na) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars | item54 | 200.24 | Qtl |
| 55 | 55 | Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. \na) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | item55 | 135.03 | Qtl |
| 56 | 56 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (iv) Size 125mm x 60mm (Double rebate) | item56 | 47.8 | M |
| 57 | 57 | Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished. | item57 | 64.12 | Sqm |
| 58 | 58 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified . ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | item58 | 108.3 | Rm |
| 59 | 59 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. \na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item59 | 284.3 | Sqm |
| 60 | 60 | Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. \na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item60 | 237.96 | Sqm |
| 61 | 61 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item61 | 508.12 | Sqm |
| 62 | 62 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) \nBRAND : FIRESTOP / FIREND / FIRE SHIELD | item62 | 4 | Each |
| 63 | 63 | Sanitary and water supply works:-\nProviding fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\nA) Parryware make\n(v) Elite S Trap (Cat No.C0297) (inclusive of seat cover) | item63 | 2 | Each |
| 64 | 64 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\ni) Parryware make\na) White\n(vii) Johnson Pedder (Cat No.C8107) | item64 | 2 | Each |
| 65 | 65 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) 1.13.1 PEDESTAL BASIN (with pedestal)\n(A) Parryware Make\n(a) White \n(ix) Cardiff 580 x 450 (Cat. No.C0480/81, C0375) (white/coloured | item65 | 4 | Each |
| 66 | 66 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | item66 | 4 | Each |
| 67 | 67 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make\n(a) Continental (Cat.No.ACN-1331N) | item67 | 4 | Each |
| 68 | 68 | Providing, fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make\n(vii) Kubix (600mm long) (Cat.No.AKB-35711) | item68 | 4 | Each |
| 69 | 69 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make \n(i) 32mm (HT/FT) (Cat.No.ALD-705 / 709) | item69 | 4 | Each |
| 70 | 70 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (a) Jaquar make \n(i) Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe (Cat.No. ALD-769) | item70 | 4 | Each |
| 71 | 71 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \na) In exposed surfaces or in trenches. \n(ii) 110mm dia. | item71 | 45.1 | RM |
| 72 | 72 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia. | item72 | 5 | RM |
| 73 | 73 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.\na) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item73 | 2 | Each |
| 74 | 74 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \na) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item74 | 2 | Each |
| 75 | 75 | Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \na) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item75 | 2 | Each |
| 76 | 76 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\na) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item76 | 2 | Each |
| 77 | 77 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make | item77 | 2 | Each |
| 78 | 78 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia | item78 | 6 | Each |
| 79 | 79 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls\na) 50 mm dia (Medium)\ni) Using Tata make | item79 | 20 | RM |
| 80 | 80 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. \na) 50 mm dia (Medium)\ni) Using Tata make | item80 | 5 | RM |
| 81 | 81 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(A)) Exposed or in trenches\nb) 20 mm nominal outer dia pipe | item81 | 15 | RM |
| 82 | 82 | (B) Concealed pipe with cutting chases & making good the walls \nb) 20 mm nominal outer dia pipe | item82 | 25 | RM |
| 83 | 83 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)\n(II) Jaquare make\n(a)Continental /Clarion\n (i)Standard | item83 | 4 | Each |
| 84 | 84 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Jaquar\n(a) Continental / Clarion\n(i)15mm dia Male / Female (long thread) | item84 | 4 | Each |
| 85 | 85 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(II) Jaguar make\n(a) Continental | item85 | 4 | Each |
| 86 | 86 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\na) 50mm dia | item86 | 1 | Each |
| 87 | 87 | Supplying and fitting ball valve as specified and directed.. \nb) 20mm dia. (gun metal/Copper) | item87 | 1 | Each |
| 88 | 88 | Deep Tube Well \nLabour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. iv) Bore hole of 150mm diameter | item88 | 122 | RM |
| 89 | 89 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. \n(II) PVC PIPE\nSUPREME /PRINCE / FUSION /SFMC Brand\nvi) 140mm diameter | item89 | 119 | RM |
| 90 | 90 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. \nB) PVC PIPE\nSUPREME / PRINCE / FUSION /SFMC Brand\niii) 40mm diameter | item90 | 45 | RM |
| 91 | 91 | Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. v) 150mm diameter | item91 | 1 | Each |
| 92 | 92 | Supplying fitting and fixing check valve (non return valve) including thread to pipes. iii) 40mm diameter | item92 | 1 | Each |
| 93 | 93 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained | item93 | 1 | Job |
| 94 | 94 | Flushing, clearing, washing and watering of the tube well | item94 | 1 | Job |
| 95 | 95 | WATER TANK 5.4.2 Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (III) 1000 litre capacity (a) Sintex make | item95 | 2 | Each |
| 96 | 96 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed. (c) 1000 litre capacity | item96 | 2 | Each |
| 97 | 97 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches\nSUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)\nb) 40 mm dia | item97 | 50 | RM |
| 98 | 98 | e) 20 mm dia | item98 | 32.26 | RM |
| 99 | 99 | ELECTRICAL WORKS\nWiring for multi control light point limiting to 100W with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete\n1.15.1 Short point up to 3.00 metre. length | item99 | 12 | Each |
| 100 | 100 | Medium point up to 6.00 metre. Length. | item100 | 30 | Each |
| 101 | 101 | Long point up to 10.00 metre. Length. | item101 | 44 | Each |
| 102 | 102 | Wiring to a 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere .1.2.2 Medium point up to 6.00 metre. Length. | item102 | 6 | Each |
| 103 | 103 | Long point up to 10.00 metre. Length. | item103 | 6 | Each |
| 104 | 104 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. 1.3.2 Medium point up to 6.00 metre. Length. | item104 | 8 | Each |
| 105 | 105 | Long point up to 10.00 metre. Length. | item105 | 8 | Each |
| 106 | 106 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. 1.4.1 Extra Long point up to 15.00 metre. length. | item106 | 4 | Each |
| 107 | 107 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.\n1.8.1 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | item107 | 450 | Mtr. |
| 108 | 108 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | item108 | 80 | Mtr. |
| 109 | 109 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system. | item109 | 150 | Mtr. |
| 110 | 110 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.\n1.10.3 With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping system. | item110 | 130 | Mtr. |
| 111 | 111 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd pin of the socket as required on the switch board in flat ISI marked casing 'n' capping system, when fitted on same board of light and fan. | item111 | 8 | Each |
| 112 | 112 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof (IP-43) double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.8.1.1 4 way TPN (4+12) double door | item112 | 2 | Each |
| 113 | 113 | 6 way TPN (4+18) double door | item113 | 1 | Each |
| 114 | 114 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door (IP-43) surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.20.1. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 15.20.1.1 4 way TPN (8+12) double door | item114 | 1 | Each |
| 115 | 115 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.1 B Series\n(Schneider MG, legrand, Hager, Crabtree xpro make)\n16.1.1.16 to 32A | item115 | 36 | Each |
| 116 | 116 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.3.1 B Series\n(ABB, Schneider MG, legrand, Hager, Crabtree xpro make)\n16.3.1.2 40A | item116 | 8 | Each |
| 117 | 117 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.16.1 25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make)\n16.16.1.4 63A | item117 | 6 | Each |
| 118 | 118 | 100A | item118 | 1 | Each |
| 119 | 119 | Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection) powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. \n16.44.1(C&S, Havells, Indo Asian, HPL, GECO make)\n16.44.1.1 63A | item119 | 1 | Each |
| 120 | 120 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 0.85M X 1.20MX 0.40M made of 16 SWG (1.66 mm thick) C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 4nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 25mm X 5 mm 4 strip copper Bus-Bar 1.0 M length each\n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos\n5. Voltmeter & Ammeter Selector Switch - 2 nos\n6. 2 A Slide fuse unit - 3nos\n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | item120 | 1 | Each |
| 121 | 121 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item121 | 2 | Each |
| 122 | 122 | Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item122 | 3 | Each |
| 123 | 123 | Extra for using salt 5 Kg and Charcoal 64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item123 | 2 | Each |
| 124 | 124 | Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . | item124 | 3 | Each |
| 125 | 125 | Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item125 | 20 | Mtr. |
| 126 | 126 | Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item126 | 30 | Mtr. |
| 127 | 127 | Supplying,installation,testing and Commission of the following LED lamp as directed by the department 12/NEW.19 Philips LED Tubes Model Master LEDtube 1200mm 20W840 T8 I /Master LEDtube 1200mm 20W865 T8 I /MAS LEDtube STD 1200mm 20W865 T8 I or equivalent as approved by the Deptt. | item127 | 20 | Each |
| 128 | 128 | Supplying,installation,testing and Commission of the following indoor Recessed Mounted LED Luminaires complete with all accessories such as driver etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department 6/NEW.14 Philips lighting luminaire 24 W GreenPerform Ananlog Dimmable Model DN 395B LED20S-3000 PSR WH /DN 395B LED20S-4000 PSR WH /DN 395B LED20S-6500 PSR WH or equivalent as approved by the Deptt. | item128 | 32 | Each |
| 129 | 129 | Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department [ without regulator]. 27.1.10 Premium model 1200 mm Sweep (CROMPTON make), Premium model 1050 mm Sweep (CROMPTON make) | item129 | 4 | Each |
| 130 | 130 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. 27.2.1.3 High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | item130 | 4 | Each |
| 131 | 131 | Supplying including fitting and fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. \n27.4.1.4 V2 with metal blade, 450 mm sweep | item131 | 20 | Each |
| 132 | 132 | Supplying fitting and fixing of ceiling fan regulator including connections etc. complete as required. \n27.6.2 Electronic Type | item132 | 4 | Each |
| 133 | 133 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 32.1.3 3 & 1/2 Core A2XFY\n32.1.3.3 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item133 | 45 | Mtr. |
| 134 | 134 | Supplying installation, testing, programming and commissioning of Audio equipment,\n4-Channel Power Amplifier, 75 W per channel @ 8 ohms | item134 | 1 | Each |
| 135 | 135 | Supplying installation, testing, programming and commissioning of Audio equipment, 4 Channel Power Amplifier, 125 W per channel @ 8 ohms | item135 | 1 | Each |
| 136 | 136 | Supplying installation, testing, programming and commissioning of Audio equipment, 8-Channel Power Amplifier, 75 W per channel @ 8 ohms | item136 | 1 | Each |
| 137 | 137 | Supplying installation, testing, programming and commissioning of Audio equipment, 8 Channel Power Amplifier, 125 W per channel @ 8 ohms | item137 | 1 | Each |
| 138 | 138 | Supplying installation, testing, programming and commissioning of Audio equipment, Single auto former to provide impedance matching between an amplifier output and constant voltage loud speakers. | item138 | 1 | Each |
| 139 | 139 | Supplying installation of Audio equipment, SPEAKER STANDS , Holds up to 50 kg. Wt: 2.45 kg, H: 1270/1930 mm | item139 | 2 | Each |
| 140 | 140 | Supplying installation, testing, programming and commissioning of Audio equipment, Balanced microphone cable with single shield, high flexible, velvet faint PVC-Jacket , Conductor: Stranded bare copper cables 28 x 0.10 mm (0.22mm²) , Jacket: PVC, 6.0 mm max. | item140 | 400 | Metre |
| 141 | 141 | Supplying installation testing and commissioning of 1000 W Halogen profile light consisting of 2 nos.150mm dia PC lenses, imported socket, ellipsoidal anodised alluminium reflector, 1000W halogen BipinT-11 lamp, yoke colour frame & suitable clamp Make: canara lighting or eqvt as approved by the Deptt. | item141 | 4 | Nos |
| 142 | 142 | Supplying installation of WINGS :- Providing and fixing cloth wings made out of black glazed cotton cloth fixed on 6mm thick commercial plywood fixed on one side of MS 50mm x 25mmx 16G pipe wielded frame work. The pipe framework made out of 25mm x 50 mm pipe. c/c 900 x 900 fixed with overhead pivote track complete with duly painted on both framework. | item142 | 1 | Set |
| 143 | 143 | Supplying installation of FRILLS :-Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipeSB. 14.180.1a Size: 24000 [AV] x 2000[H] | item143 | 1 | Set |
| 144 | 144 | Supply of winch operating suspension sets 30 Kg capacity 5 lines with 12m/10m barrel, 5 line blocks winch unit with handle and rachet, clew plate and steel wire rope winch mounting etc. SB. 14.181.2Lighting Bars | item144 | 1 | Set |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
