| 1 | 1 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | BI01010001010000000000000515BI0100001113 | 97.73 | sqm |
|---|
| 2 | 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001114 | 24 | each |
|---|
| 3 | 3 | Dismantling old plaster or skirting raking out joints and cleaning the\nsurface for plaster including disposal of rubbish to the dumping\nground within 50 metres lead. | BI01010001010000000000000515BI0100001115 | 405.97 | sqm |
|---|
| 4 | 4 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001116 | 128.68 | sqm |
|---|
| 5 | 5 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001117 | 265.16 | sqm |
|---|
| 6 | 6 | Distempering with oil bound washable distemper of approved brand\nand manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer | BI01010001010000000000000515BI0100001118 | 295.2 | sqm |
|---|
| 7 | 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001119 | 208.3 | sqm |
|---|
| 8 | 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and\nmatching pigment etc., complete. | BI01010001010000000000000515BI0100001120 | 34.5 | sqm |
|---|
| 9 | 9 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001121 | 60.87 | sqm |
|---|
| 10 | 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001122 | 231.87 | sqm |
|---|
| 11 | 11 | Providing and fixing aluminium work for doors, windows, ventilators\nand partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001123 | 53.14 | kg |
|---|
| 12 | 12 | Providing and fixing glazing in aluminium door, window, ventilator\nshutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001124 | 9.72 | sqm |
|---|
| 13 | 13 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm\nwith a wall thickness of 5 mm, made out of extruded 5mm rigid PVC\nfoam sheet, mitred at corners and joined with 2 Nos of 150 mm long\nbrackets of 15x15 mm M.S. square tube, the vertical door frame profiles\nto be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM\nrubber gasket weather seal to be provided through out the frame. The\ndoor frame to be fixed to the wall using M.S. screws of 65/100 mm size,\ncomplete as per manufacturer’s specification and direction of Engineerin-\nCharge. | BI01010001010000000000000515BI0100001125 | 115 | mtr |
|---|
| 14 | 14 | Providing and fixing to existing door frames. 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting alvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail madeup of 'H' section, a uPVC hollow section of size 100x30 mmand 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001126 | 32.68 | sqm |
|---|
| 15 | 15 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | BI01010001010000000000000515BI0100001127 | 25 | each |
|---|
| 16 | 16 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm | BI01010001010000000000000515BI0100001128 | 23 | each |
|---|
| 17 | 17 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | BI01010001010000000000000515BI0100001129 | 48 | each |
|---|
| 18 | 18 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm thick | BI01010001010000000000000515BI0100001130 | 4.5 | sqm |
|---|
| 19 | 19 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001131 | 16 | each |
|---|
| 20 | 20 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001132 | 2 | each |
|---|
| 21 | 21 | Providing and fixing white vitreous china flat back half stall urinal of\nsize 580x380x350 mm with white PVC automatic flushing cistern,\nwith fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001133 | 5 | each |
|---|
| 22 | 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls\nwherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISi marked | BI01010001010000000000000515BI0100001134 | 6 | each |
|---|
| 23 | 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia | BI01010001010000000000000515BI0100001135 | 12 | each |
|---|
| 24 | 24 | Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid\n1 150 mm nominal size square 100 mm diameter of the inner hinged round grating\n | BI01010001010000000000000515BI0100001136 | 12 | each |
|---|
| 25 | 25 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001137 | 5 | each |
|---|
| 26 | 26 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001138 | 12 | each |
|---|
| 27 | 27 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | BI01010001010000000000000515BI0100001139 | 50 | mtr |
|---|
| 28 | 28 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001140 | 23 | each |
|---|
| 29 | 29 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS : 3989 | BI01010001010000000000000515BI0100001141 | 10 | each |
|---|
| 30 | 30 | Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS : 3989 | BI01010001010000000000000515BI0100001142 | 10 | each |
|---|
| 31 | 31 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001143 | 10 | each |
|---|
| 32 | 32 | Providing and fixing terminal guard :100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001144 | 10 | each |
|---|
| 33 | 33 | Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001145 | 20 | each |
|---|
| 34 | 34 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 | BI01010001010000000000000515BI0100001146 | 10 | each |
|---|
| 35 | 35 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia | BI01010001010000000000000515BI0100001147 | 5 | mtr |
|---|
| 36 | 36 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms | BI01010001010000000000000515BI0100001148 | 5 | each |
|---|
| 37 | 37 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore | BI01010001010000000000000515BI0100001149 | 5 | each |
|---|
| 38 | 38 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore | BI01010001010000000000000515BI0100001150 | 12 | each |
|---|
| 39 | 39 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore | BI01010001010000000000000515BI0100001151 | 23 | each |
|---|
| 40 | 40 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter | BI01010001010000000000000515BI0100001152 | 5 | each |
|---|
| 41 | 41 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : | BI01010001010000000000000515BI0100001153 | | |
|---|
| 42 | 41.01 | 200 mm diameter | BI01010001010000000000000515BI0100001154 | 40 | mtr |
|---|
| 43 | 41.02 | 100 mm diameter | BI01010001010000000000000515BI0100001155 | 20 | mtr |
|---|
| 44 | 42 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes\nwith collars jointed with stiff mixture of cement mortar in the proportion of\n1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : | BI01010001010000000000000515BI0100001156 | | |
|---|
| 45 | 42.01 | 150 mm diameter | BI01010001010000000000000515BI0100001157 | 18 | mtr |
|---|
| 46 | 42.02 | 250 mm diameter | BI01010001010000000000000515BI0100001158 | 40 | mtr |
|---|
| 47 | 43 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement completeas per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001159 | 5 | each |
|---|
| 48 | 44 | Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead :Rectangular manhole 90x80 cm and 45 cm deep | BI01010001010000000000000515BI0100001160 | 8 | each |
|---|
| 49 | 45 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001161 | 1 | each |
|---|
| 50 | 46 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001162 | 58 | mtr |
|---|
| 51 | 47 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil | BI01010001010000000000000515BI0100001163 | 0.94 | cum |
|---|
| 52 | 48 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate\n40 mm nominal size) | BI01010001010000000000000515BI0100001164 | 1.11 | cum |
|---|
| 53 | 49 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001165 | 58.8 | sqm |
|---|
| 54 | 50 | Providing and fixing ISI marked flush door hutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001166 | 2.52 | sqm |
|---|
| 55 | 51 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood | BI01010001010000000000000515BI0100001167 | 0.1 | cum |
|---|
| 56 | 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc | BI01010001010000000000000515BI0100001168 | | |
|---|
| 57 | 52.01 | 32 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001169 | 20 | mtr |
|---|
| 58 | 52.02 | 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001170 | 25 | mtr |
|---|
| 59 | 52.03 | 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001171 | 50 | mtr |
|---|
| 60 | 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of engineer in Charge.40 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001172 | 10 | mtr |
|---|
| 61 | 54 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore | BI01010001010000000000000515BI0100001173 | 1 | each |
|---|
| 62 | 55 | Providing and placing on terrace (at all floor levels) polyethylene water\nstorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001174 | 4000 | ltr |
|---|
| 63 | 56 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore | BI01010001010000000000000515BI0100001175 | 4 | No |
|---|
| 64 | 57 | Providing and fixing stone slab with table rubbed, edges rounded and\npolished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade | BI01010001010000000000000515BI0100001176 | 4.32 | sqm |
|---|
| 65 | 58 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001177 | 140.19 | sqm |
|---|
| 66 | 59 | Providing and fixing on wall face unplasticised Rigid PVC rain water\npipes conforming to IS : 13592 Type A, including jointing with seal\nring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,\n(i) Single socketed pipes. 110 mm diameter | BI01010001010000000000000515BI0100001178 | 12 | mtr |
|---|
| 67 | 60 | Coursed rubble masonry with hard stone (first or second sort) in\nsuperstructure above plinth level and upto floor five level. Masonry work (first sort) , in cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001179 | 0.83 | cum |
|---|
| 68 | 61 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete\nat all levels. Granite of any colour and shade Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001180 | 3.9 | sqm |
|---|
| 69 | 62 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work | BI01010001010000000000000515BI0100001181 | 7.7 | mtr |
|---|
| 70 | 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved\nquality (screwed end) : 25 mm nominal bore | BI01010001010000000000000515BI0100001182 | 1 | each |
|---|
| 71 | 64 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | BI01010001010000000000000515BI0100001183 | 3.4 | cum |
|---|
| 72 | 65 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse\nsand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | BI01010001010000000000000515BI0100001184 | 1.35 | cum |
|---|
| 73 | 66 | \"Providing and laying china mosaic flooring using broken glazed tiles of required colours and shade, laid in random pattern as per the architectural drawing fixed over 20mm (average) thick base of cement morter 1:4 ( 1 : Cement : 4 Coarse Sand ) including grey cement slurry @ 4.40 kg./ sqm. base admixed with water proofing compound.The broken tiles shall be laid and jointed with cement slurry @ 3.30kg/sqm including pointing with white cement mortar 1:2 (1 White Cement 2 Marble Dust) with an admixeture of pigment to match the approved shade and mixing water proofing compound in the proportions recommended by the manufacturer. levelling and cleaning of top finished surface etc. ( including making rough the existing surface by hacking) all complete as per directed by the engineer-in- charge. | BI01010001010000000000000515BI0100001185 | 96.4 | sqm |
|---|
| 74 | 67 | Cleaning of sludge from septic tank and disposed as per directed by Engg-in-charge | BI01010001010000000000000515BI0100001186 | 120 | Cum |
|---|
| 75 | 68 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to\nfloor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001187 | 0.3 | cum |
|---|
| 76 | 69 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers | BI01010001010000000000000515BI0100001188 | 5 | sqm |
|---|
| 77 | 70 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001189 | 45 | KG |
|---|
| 78 | 71 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001190 | 16 | each |
|---|
| 79 | 72 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001191 | 4 | each |
|---|