| 1 | 1 | Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings. | | 100 | Sqm |
|---|
| 2 | 2 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | | 80 | Sqm |
|---|
| 3 | 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | | 20 | Sqm |
|---|
| 4 | 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets | | 90 | Sqm |
|---|
| 5 | 5 | S&F 4mm thick of size 600mm x 600mm HPSC (High pressure steam cured) prelaminated self embosed, textured designer board E classic board as in ceiling tiles fixed with 4mm dia GI suspenders @ 600mm x 600mm c/c bothways including necessary galvanised iron powder coated frame work of size 28x24x0.9mm thick angle at corners. | | 90 | Sqm |
|---|
| 6 | 6 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.confirming to Fe-410-W(Gde-E-250) quality-B | | 275 | Kg |
|---|
| 7 | 7 | Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. | | 50 | Sqm |
|---|
| 8 | 8 | M & L for preparation of old steel Surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on surfacess of any discription, over 10cm in width or girth | | 150 | Sqm |
|---|
| 9 | 9 | Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc. | | 5 | Cum |
|---|
| 10 | 10 | M & L pre-cast cement concrete block masonry 1:3:6 type C1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in mortar, complete set in cement mortar 1:6 | | 5 | Cum |
|---|
| 11 | 11 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. | | 250 | Sqm |
|---|
| 12 | 12 | M&L for 15 mm thick cement mortar 1:6 on Brick or concrete surface finished even and smooth without using extra cement all as specified | | 150 | Sqm |
|---|
| 13 | 13 | M&L for 15 mm thick cement mortar 1:4 on Brick or concrete surface finished even and smooth without using extra cement all as specified | | 150 | Sqm |
|---|
| 14 | 14 | Preparation of new surface of wall with putty filling on plastering surface and applying two coat of oil emulsion distemper walls. | | 150 | Sqm |
|---|
| 15 | 15 | Preparation of old surface of walls and applying one coat at oil emulsion distempering on walls. | | 250 | Sqm |
|---|
| 16 | 16 | M & L for preparation of new plastered surfaces of any description and applying two coats of acrylic anti fungal exterior base paint over a coat of primer on walls complete all as specified and as directed by Engr-in-Charge. | | 150 | Sqm |
|---|
| 17 | 17 | M & L for complete removal of existing treatment and applying two coats of acrylic anti fungal exterior base paint over a coat of primer on walls including prepartion of old painted surfaces complete all as specified and as directed by Engr-in-Charge. | | 250 | Sqm |
|---|
| 18 | 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) | | 390 | Sqm |
|---|
| 19 | 19 | Demolition of cement concrete (unreinforced) concrete in ground floors and paving n-exc 15cm thickness ( below or above ground floors.) | | 22 | Cum |
|---|
| 20 | 20 | M & L for coloured glazed ceramic tiles 450x300x7mm thick as on vertical surfaces of wall such as skirting, dados and riser to step set and jointed in neat cement slurry and pointed in white or coloured cement to match,including 10mm thick plaster in cement mortar 1:4. | | 350 | Sqm |
|---|
| 21 | 21 | M & L for Coloured non skid ceramic tile 7 to 8 mm thick in floors (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 20mm thick screed bed in CM 1:6. | | 150 | Sqm |
|---|
| 22 | 22 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20 mm thick screed bed in CM 1:6. | | 30 | Sqm |
|---|
| 23 | 23 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6. | | 10 | Sqm |
|---|
| 24 | 24 | M & L PCC 1:3:6, type C-2, 75mm thick as in plinth protection, Surface finished fair and smooth without using extra cement. | | 75 | Sqm |
|---|
| 25 | 25 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified. | | 30 | Each |
|---|
| 26 | 26 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm but not exc 4 sqm each complete all as specified. | | 30 | Each |
|---|
| 27 | 27 | Refixing of shutters in same opening of any description exc 1 Sqm and not exc 2 Sqm each | | 10 | Each |
|---|
| 28 | 28 | Taking down shutter of exc 1 Sqm and n exc 2 sq.m each complete all as specified and as directed. | | 10 | Each |
|---|
| 29 | 29 | S&F for II nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified | | 0.7 | Cum |
|---|
| 30 | 30 | S&F 35 MM thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified. | | 35 | Sqm |
|---|
| 31 | 31 | S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I | | 20 | Sqm |
|---|
| 32 | 32 | S&F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified | | 350 | Kg |
|---|
| 33 | 33 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified | | 55 | Sqm |
|---|
| 34 | 34 | S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified | | 35 | Sqm |
|---|
| 35 | 35 | S/F powder coated alluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 7.5cm for windows. | | 40 | Sqm |
|---|
| 36 | 36 | S&F galvanized mild steel wire cloth 0.45 mm nominal dia and average width of aperture 1.18 mm and fixed with tined tacks. | | 20 | Sqm |
|---|
| 37 | 37 | S&F Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads. | | 60 | Sqm |
|---|
| 38 | 38 | S&F 4mm thick sheet plain glass, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm each panes complete all as specified | | 30 | Sqm |
|---|
| 39 | 39 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm each panes pin head type, figured glass complete all as specified | | 30 | Sqm |
|---|
| 40 | 40 | S&F Sheet glass, ordinary quality 5.5 mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane | | 35 | Sqm |
|---|
| 41 | 41 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with m.s square tube supplying and fixing in opening as per specification and drawing. | | 90 | RM |
|---|
| 42 | 42 | M&L for Factory made solid PVCMoulded Door shutter 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain coour PVC sheet on back face, supplying and fixing in the frame at site as per specification and drawing. | | 25 | Sqm |
|---|
| 43 | 43 | S&F 250 mm long Aluminium alloy,anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified. | | 10 | Each |
|---|
| 44 | 44 | Supply & fixing 100 mm size butt hinges medium weight cold rolled mild steel all as specified. | | 90 | Each |
|---|
| 45 | 45 | S&F 150 mm aluminium, anodised,barrel tower bolts of extruded section and fixed. long mild steel tower bolt stove enameled black with bright bolt all as specified. | | 60 | Each |
|---|
| 46 | 46 | S&F 125 mm aluminium,cast type,handle anodised all as specified. | | 60 | Each |
|---|
| 47 | 47 | Preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer com all as specified. | | 150 | Sqm |
|---|
| 48 | 48 | Preparation of old wood surface of any description over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified. | | 250 | Sqm |
|---|
| 49 | 49 | Supply and fixing fancy type CP brass 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwewd iron pipe or for brass ferrule, and fixed. | | 25 | Each |
|---|
| 50 | 50 | S&F in repair stop valve cast copper alloy fancy type CP, screwed down high pressure with capstan head, screwed both ends for iron pipes or for union & fixed in 15 mm bore pipe. | | 25 | Each |
|---|
| 51 | 51 | Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections including 110mm PVC (SWR) WC connector with lip ring etc complete. | | 15 | Each |
|---|
| 52 | 52 | Supply & Fix in repair vitreous china wash down water closet pan (pedestal pattern ), white connecting to trap and to flushing pipe front or back inlet etc complete all as specified and directed. | | 5 | Each |
|---|
| 53 | 53 | S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fix in repairs. | | 5 | Each |
|---|
| 54 | 54 | S & F health faucet with bib tap and telephonic arm with cord and sprayer CP Brass in repair. | | 5 | Each |
|---|
| 55 | 55 | S&F PVC connection 15mm bore size with PTMT nuts of length 45cm. | | 24 | Each |
|---|
| 56 | 56 | S&F PVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete low level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as directed | | 20 | Each |
|---|
| 57 | 57 | S&F half stall urinal in repair Vitreous china urinals, bowl type (back or corner wall type), complete incl providing & fixing plugs, bedding urinal against wall in CM 1:2, suring urinals to plugs with and incl 60mm long brass screws, pointing around urinals back in cement incl PVC connection 600mm long, waste pipe 32 mm dia, push button tap of cast copper alloy, screwed down for iron pipe and fixed complete all as specified and directed | | 8 | Each |
|---|
| 58 | 58 | S&F wash hand basin, white flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, 15mm PVC connection 600mm long, waste pipe 32 mm dia, 15 mm pillar tap, brackets, including cutting for and pinning in ends of brackets or erecting stand etc. complete all as specified and directed. | | 8 | Each |
|---|
| 59 | 59 | S&F Tubular towel rail, 20mmdia, D type, 60cm long between flanges. | | 20 | Each |
|---|
| 60 | 60 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. | | 20 | Each |
|---|
| 61 | 61 | Taking up or down steel tubing & connections incl cleaning for refixing or removing of pipe 15 mm bore. | | 60 | RM |
|---|
| 62 | 62 | Taking up or down steel tubing & connections incl cleaning for refixing or removing of pipe 20 mm bore. | | 40 | RM |
|---|
| 63 | 63 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. | | 60 | RM |
|---|
| 64 | 64 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. | | 40 | RM |
|---|
| 65 | 65 | Supply and fixing in CPVC 20mm Brass Elbow (3/4 x 1/2) | | 10 | Each |
|---|
| 66 | 66 | Supply and fixing in CPVC 20mm Brass Tee | | 10 | Each |
|---|
| 67 | 67 | Supply and fixing in CPVC 25mm Male Brass Threaded Adaptor (MTA/ MBTA) | | 20 | Each |
|---|
| 68 | 68 | Supply and fixing in CPVC 25mm Female Brass Threaded Adaptor (FTA/ FBTA) | | 20 | Each |
|---|
| 69 | 69 | 'Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) | | 10 | Each |
|---|
| 70 | 70 | 'Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) | | 10 | Each |
|---|
| 71 | 71 | Supply and fixing in CPVC 20mm Ball valve | | 2 | Each |
|---|
| 72 | 72 | Supply and fixing in CPVC 25mm Ball valve | | 2 | Each |
|---|
| 73 | 73 | S & F powder coated curtain rods 25 mm dia fancy type. | | 30 | RM |
|---|
| 74 | 74 | S & F brackets for item above aluminium anodised. | | 60 | Each Pair |
|---|
| 75 | 75 | M & L for washing, rubbing down and stopping of distempered and painted surfaces, preparation of old surface and applying 2 coats of white wash on ceiling. | | 100 | Sqm |
|---|
| 76 | 76 | Taking up cast iron 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. | | 25 | RM |
|---|
| 77 | 77 | Taking up cast iron 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead. | | 40 | RM |
|---|
| 78 | 78 | S & F PVC (SWR) pipes 75 mm bore single socketed in any lengths with rubber rings joints fixed to walls | | 25 | RM |
|---|
| 79 | 79 | S & F PVC (SWR) pipes 110 mm bore single socketed in any lengths with rubber rings joints fixed to walls | | 40 | RM |
|---|
| 80 | 80 | Supply and fix PVC (SWR) vent cowl 75mm Dia. | | 6 | Each |
|---|
| 81 | 81 | Supply and fix PVC (SWR) vent cowl 110mm Dia. | | 6 | Each |
|---|
| 82 | 82 | S & F PVC (SWR) Gully trap 125/110 mm setting & jointing with solvent cement | | 6 | Each |
|---|
| 83 | 83 | S & F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement | | 12 | Each |
|---|
| 84 | 84 | S & F PVC (SWR) pipes 110 mm bore single socketed in any lengths with rubber rings laid in trenches or in floors | | 40 | RM |
|---|
| 85 | 85 | S & F PVC (SWR) pipes 160 mm bore single socketed in any lengths with rubber rings laid in trenches or in floors | | 40 | RM |
|---|
| 86 | 86 | M & L PCC (1:3:6) type C2 using 40 mm graded agg as in concrete bed to drain pipes incl packing under, & haunching against the sides of pipes after they are laid & tested, bore of pipe 110mm. | | 40 | RM |
|---|
| 87 | 87 | M & L PCC (1:3:6) type C2 using 40 mm graded agg as in concrete bed to drain pipes incl packing under, & haunching against the sides of pipes after they are laid & tested, bore of pipe 160mm. | | 40 | RM |
|---|
| 88 | 88 | S & F 75 mm PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door. | | 2 | Each |
|---|
| 89 | 89 | S & F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door. | | 2 | Each |
|---|
| 90 | 90 | Demolition of concrete (reinforcement ) of any description and in any position not otherwise specifically provided for all as specified | | 1.25 | Cum |
|---|
| 91 | 91 | M & L Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like | | 1 | Cum |
|---|
| 92 | 92 | Precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4. | | 0.25 | Cum |
|---|
| 93 | 93 | S&F TMT bars, 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. | | 100 | Kg |
|---|
| 94 | 94 | M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished, flat surfaces of concrete. | | 6 | Sqm |
|---|
| 95 | 95 | M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces. | | 6 | RM |
|---|
| 96 | 96 | M & L Stainless Steel Hospital sink with long type tap arrangement all as per manufacturers specification make cool star product ID-10004994712 do equivalent. | | 1 | Each |
|---|
| 97 | 97 | Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge. | | 236 | Point |
|---|
| 98 | 98 | M & L for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium protection stove enamelling rigid steel conduit as per IS 9537 (Part-II): 1981 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. | | 185 | Point |
|---|
| 99 | 99 | & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium protection stove enamelling rigid steel conduit as per IS 9537 (Part-II): 1981 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. | | 30 | Point |
|---|
| 100 | 100 | M & L for point wiring for one 3 pin/ 5 pin 15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. | | 21 | Point |
|---|
| 101 | 101 | S & F switch socket combination with (3 pin and 2 pin) combined socket outlets, 6A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B and switch, 6 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. | | 30 | Each |
|---|
| 102 | 102 | S & F switch socket combination with (3 pin and 3 pin) having two earthing pins combined socket outlets, 6A & 16A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B and switch, 16 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A and indicator and fuse complete all as specified and as directed. | | 21 | Each |
|---|
| 103 | 103 | S & F surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block. | | 185 | Each |
|---|
| 104 | 104 | Supply & fix 'LUMILINE\" for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver of 18W of Make LUKER Cat Part no. LT 518 or equivalent in Havells/Philips/Wipro | | 107 | Each |
|---|
| 105 | 105 | S & F step type electronic fan regulator, capacitor type, 100 watt, 240 volts, 50 Hz, single phase, flush type on the existing phenolic laminated sheet complete all as specified and as directed. | | 70 | Each |
|---|
| 106 | 106 | M & L for fixing DB-SPN-4 way 230 V double door flush type made of sheet metal with 200A rated copper/ Aluminium bus bar including. | | 10 | Each |
|---|
| 107 | 107 | S & F isolator SPN, 32 A, 240 V complete all as specified and as directed. | | 10 | Each |
|---|
| 108 | 108 | S & F SP 6A - 32A, 240V MCB complete all as specified and as directed. | | 18 | Each |
|---|
| 109 | 109 | Disconnecting & Taking down ceiling fan/ Exhaust fan of any sweep any make from any position at site transporating to MES store Yard & dismantling blades opening the stator and rotor of ceiling fan and providing new lubricating, grease in bearing/bushes, re-assembling, commissioning and testing complete & rehanging fan to site incl providing nuts, bolts, locking bolts, blades screws, split pin, rubber real, PVC connector, washers whereas required and refixing in position complete all as directed by Engineer-in-charge.\nNote:- All major rerpair such as replacement of Bush, bearing , condensor, shaft, connection wire , winding & painting will be measured & paid separately under S&F/M&L items here-in-after | | 78 | Each |
|---|
| 110 | 110 | M&L for removing of burnt winding from ceiling fan 1200/1400mm sweep from stator and rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete incl transportation to contractor's work shop and bringing back to store and testing complete all as directed by Engineer-in-charge. | | 70 | Each |
|---|
| 111 | 111 | As per item no. 14 Above but for Exhaust Fan 12” sweep complete all as specified and as directed. | | 6 | Each |
|---|
| 112 | 112 | All As per item no. 14 Above but for Exhaust Fan 18” sweep complete all as specified and as directed. | | 2 | Each |
|---|
| 113 | 113 | M&L for scraping all foreign materials with emery paper, cleaning the body, blades, legs, frame and down rod (preparatory work) for painting ceiling fan and painting with one coat of supper enameled white paint (spray painting) and writing of MES No. with capital letter of size 20 mm height and 03 mm width with synthetic enameled black paint for fans all as directed for the ceiling fans of 1200/1400 mm sweep. | | 70 | Each |
|---|
| 114 | 114 | All as per item no. 17 above but for Exhaust Fan 12\" sweep with Grey paint complete all as specified and as directed. | | 6 | Each |
|---|
| 115 | 115 | All as per item no. 17 above but for Exhaust Fan 18\" sweep with Grey paint complete all as specified and as directed. | | 2 | Each |
|---|
| 116 | 116 | S&F in Replacement of ball bearing of No 6202 complete all as specified and as directed. | | 140 | Each |
|---|
| 117 | 117 | S&F in Replacement of ball bearing of No 6203 complete all as specified and as directed. | | 8 | Each |
|---|
| 118 | 118 | M&L for MS front frame suitable for mounting of stays of 12\" exhaust fan made out of MS Sheet not less than 1.6mm thick painted with two coat of synthetic enamelled over a coat of red oxide primer complete with neccesarry fixing accessories such as nut, bolts washers etc & fixing to wall all as per existing & site requirement as directed by Engr-in-charge down old unsv . | | 6 | Each Job |
|---|
| 119 | 119 | All as per item no. 22 above but for Exhaust Fan 18\" sweep complete all as specified and as directed. | | 2 | Each Job |
|---|
| 120 | 120 | M&L for MS stay strip (set of 4) suitable for12\" exhaust fan made out of not less than 25 x 4mm MS strip bent to shape complete painted with two coat of synthetic enamelled over a coat of red oxide primer complete with neccesarry fixing accessories such as nut, bolts washers etc & fixing to wall all as per existing & site requirement as directed by Engr-in-charge. | | 6 | Each Job |
|---|
| 121 | 121 | All as per item no. 24 above but for Exhaust Fan 18\" sweep complete all as specified and as directed. | | 2 | Each Job |
|---|
| 122 | 122 | M&L for circular / rectangular framed louver shutters suitable for 12\" exhaust fan made out of MS sheet not less than 1 mm thick for frame & not less than than 0.6mm thick for shutter painted with two coat of synthetic enamelled over a coat of red oxide primer complete with neccesarry fixing accessories all as per existing & as per site requirement & directed by Engr-in-charge. | | 6 | Each Job |
|---|
| 123 | 123 | All as per item no. 26 above but for Exhaust Fan 18\" sweep complete all as specified and as directed. | | 2 | Each Job |
|---|
| 124 | 124 | S&F exhaust fan MS blade 12” as per existing complete all as directed by Engr-in-Charge complete all as specified and as directed. | | 6 | Each Job |
|---|
| 125 | 125 | S&F exhaust fan MS blade 18” as per existing complete all as directed by Engr-in-Charge complete all as specified and as directed. | | 2 | Each Job |
|---|
| 126 | 126 | Supply and fixing condenser with PVC clamp of 2.5 MFD capacity complete all as specified and as directed. | | 70 | Each |
|---|
| 127 | 127 | Supply and fixing condenser with PVC clamp of 4 MFD capacity complete all as specified and as directed. | | 8 | Each |
|---|
| 128 | 128 | Supply & fix PVC canopy of 1200/1400 mm sweep ceiling fan complete all as specified and as directed. | | 140 | Each |
|---|