| 1 | 1 | EARTH WORK Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | | 31.84 | cum |
|---|
| 2 | 2 | CONCRETE WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) | | 3.86 | cum |
|---|
| 3 | 3 | REINFORCED CEMENT CONCRETE Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | | 18.58 | cum |
|---|
| 4 | 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | | 3.82 | cum |
|---|
| 5 | 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete | | 15.36 | sqm |
|---|
| 6 | 6 | Suspended floors, roofs, landings, balconies and access platform | | 45 | sqm |
|---|
| 7 | 7 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | | 62.62 | sqm |
|---|
| 8 | 8 | Columns, Pillars, Piers, Abutments, Posts and Struts | | 63.28 | sqm |
|---|
| 9 | 9 | Weather shade, Chajjas, corbels etc., including edges | | 3.78 | sqm |
|---|
| 10 | 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars | | 2500 | Kg |
|---|
| 11 | 11 | BRICK WORK Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | | 69.71 | sqm |
|---|
| 12 | 12 | STONE WORK Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) | | 5.02 | cum |
|---|
| 13 | 13 | WOOD AND P.V.C. WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood | | 0.11 | cum |
|---|
| 14 | 14 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood 30 mm thick | | 5.28 | sqm |
|---|
| 15 | 15 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | | 2.1 | sqm |
|---|
| 16 | 16 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood | | 5.28 | sqm |
|---|
| 17 | 17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc. | | 60 | kg |
|---|
| 18 | 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | | 1 | each |
|---|
| 19 | 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | | 2 | each |
|---|
| 20 | 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 150x10 mm | | 24 | each |
|---|
| 21 | 21 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | | 2 | each |
|---|
| 22 | 22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm | | 24 | each |
|---|
| 23 | 23 | STEEL WORK Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | | 250 | kg |
|---|
| 24 | 24 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | | 700 | kg |
|---|
| 25 | 25 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | | 189 | kg |
|---|
| 26 | 26 | Providing and fixing bolts including nuts and washers complete. | | 16 | kg |
|---|
| 27 | 27 | FLOORING Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | | 45.75 | sqm |
|---|
| 28 | 28 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick | | 4.25 | sqm |
|---|
| 29 | 29 | ROOFING Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² | | 77.68 | sqm |
|---|
| 30 | 30 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² | | 11.2 | metre |
|---|
| 31 | 31 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | | 44.8 | metre |
|---|
| 32 | 32 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 6 mm thick cement board | | 45 | sqm |
|---|
| 33 | 33 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | | 72 | sqm |
|---|
| 34 | 34 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) | | 84.72 | sqm |
|---|
| 35 | 35 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work | | 117.75 | sqm |
|---|
| 36 | 36 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) | | 84.72 | sqm |
|---|
| 37 | 37 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | | 106 | sqm |
|---|
| 38 | 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | | 120 | sqm |
|---|
| 39 | 39 | Add Cost Index @51.24% | | 1 | CI |
|---|
