Construction Of Control Room Building And Development Works At 3 . 15Mva , 33/11Kv Receiving Station Swajian , District Poonch On Turn Key Basis, Kalakote-Jammu And Kashmir

TDR : 21478847

Tender Notice
BOQ

Expired

Kalakote , Jammu And Kashmir

Tender Brief : Construction Of Control Room Building And Development Works At 3 . 15Mva , 33/11Kv Receiving Station Swajian , District Poonch On Turn Key Basis

Document Fees
₹ 1000 /-

EMD
₹ 143600.0 /-

Tender Value
₹ 71.80 Lakhs /-

Submission Date
03-09-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work:Construction of Control Room building and development works at 3.15 MVA 33/11 KV Receiving Station Swajian, District Poonch on Turnkey basis
1	1	Earth work in excavation by manual means over areas ((exceeding 30 cm and upto 1.50 mtr in depth, 1.50 mtr in width as well as 10 sqm on plan) incl. disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed.All kinds of soils.	BI01010001010000000000000515BI0100001113	530	Cum
2	2	Filling available excavated earth (excluding rock) in trenches, plinth slides of foundations etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m		270	Cum
3	3	Providing and Laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:4:8(1 cement4 coarse sand:8 graded stone aggregate 40 mm nominal size) crushed. Foundations;		39	Cum
4	4	Supplying and filling in plinth with fine sand under floors including watering, ramming, consolidating and dressing complete		16	Cum
5	5	Providing and Laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 40 mm nominal size) crushed. Foundations;		298	Cum
6	6	Providing and fixing upto floor five level precast cement concrete cover slabs incl. Hoisting and setting in position with cement mortar 1:3(1 cement:3 coarse sand)cost of required centring, shuttering complete. 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 12.5 mm nominal size)Crushed		1	Cum
7	7	Providing and Laying damp proof course 40 mm thick with cement conc. 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 12.5 mm nominal size) crushed		15	Sqm
8	8	Extra for providing and mixing water proofing material in cement conc. Work in doses by weight of cement as per manufacturer’s specifications		5	Kg Per bag of 50 kg cement used in mix
9	9	Making plinth protection 50 mm thick of cement conc. conc. 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand incl. Finishing the top smooth.		40	Sqm
10	10	Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering-All work up to plinth level 1:1.5:3(1 cement;1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) crushed.		31	Cum
11	11	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string, courses, fillets, columns, pillars, piers, abutments, posts and struts etc up to floor five level excluding cost of centring, shuttering , finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size		11	Cum
12	12	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window skills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size).		21	Cum
13	13	Centring and shuttering including strutting , propping etc and removal of forms for Foundations, footings, bases of columns etc. For mass concrete.		731	Sqm
14	14	Centring and shuttering including strutting, propping etc and removal of forms for Suspended floors, roofs, landings, balconies and access platform.		66	Sqm
15	15	Centring and shuttering including strutting, propping etc and removal of form for Lintels, Beams, plinth beams, girders, bressumers and cantilevers.		165	Sqm
16	16	Centring and shuttering including strutting, propping etc and removal of form for Columns, pillars, piers, abutments, posts, and struts.		123	Sqm
17	17	Centring and shuttering including strutting, propping etc and removal of form for Edges of slabs and breaks in floors under 20 cm wide		210	Metre
18	18	Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars.		6320	Kg
19	19	Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand)		90	Cum
20	20	Extra for brick work in superstructure above plinth level upto floor V level		90	Cum
21	21	Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)		20	Sqm
22	22	Extra for brick masonry in superstructure above plinth level upto floor 5th level		20	Sqm
23	23	Providing and fixing 1 mm thick M.S steel door with frame of 40X40X6 mm angle iron, 3 mm M.S. gusset plates at the junction and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angle for diagonal braces.		18	Sqm
24	24	Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitred and welded with 15x3mm lugs, 10cm longs, embedded in cement concrete blocks 15x10x10cm of 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and scress or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of approved steel primer, excluding the coat of metal beading and other fittings except necessary hinges or pivots as required. (a)Windows		10	Sqm
25	25	(b)Windows side hung		13	Sqm
26	26	Steel work welded in built up sections/framed work including cutting hoisting, fixing in psotion and applying a priming coat of approved steel primer using structural steel etc are required.In gratings, frames, guard bar, ladders, railings, brackets, grates and similar works		4670	kilogram
27	27	Providing and fixing fly proof gauge to windows with M.S.. flat 15x3 mm and nuts and bolts complete. Galvanised M.S. wire gauge with 0.63 mm dia. wire and 1.44 mm aperture on both sides		13	Sqm
28	28	Providing and fixing hand rail be welding etc to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S tube 40mm nominal bore		50	kg
29	29	Structural Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc are required. Roof trusses:		4900	kg
30	30	Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 0.63 mm thick with zinc coating not less than 275 gm/sqm		170	Sqm
31	31	Providing ridges or hips of 60 cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/sqm		15	rm
32	32	Providing wood work in frames of false ceiling, partitions, etc. Sawn and fixed in position; Second class deodar wood		1.3	Cum
33	33	Providing and fixing panelling: Plywood 5 ply, 9 mm thick Decorative Ply wood one side decorative veneer and commercial veneer on other face (type-I) conforming to I.S: 1328BWR type. Ceiling:		127	Sqm
34	34	Cement concrete flooring 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 40 mm thick with 12.5 mm nominal size stone aggregates -crushed.		135	Sqm
35	35	Cement plaster skirting (upto 30cm height) with cement mortar 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement) 18mm thick		15	Sqm
36	36	Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resistant mortar beading and joints filled with acid and/or alkali resistant cement as per I.S:4457, complete as per directions of the Engineer-in-charge . (a) In flooring over a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand).		8	Sqm
37	37	(b) In dado/skirting on 12 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand).		4	Sqm
38	38	Providing and fixing Ist quality ceramic glazed tiles conforming to IS 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colour, shades except begundy, bottle green,black of any size as approved by Engineer incharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry # 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.		13	Sqm
39	39	Providing and fixing ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming of Is: 13755 of NITCO, ORIENT, SOMANY, KAJARIA Or equivalent make incolour such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete		7	Sqm
40	40	Providing and fixing gang saw cut mirror polished(pre moulded and pre polished), machine cut for kitchen platform, of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing , moulding and polishing to edge to give high gloss finish etc. complete at all levels Green Marble: 18 mm		2	Sqm
41	41	Extra for providing edge moulding to 19mm thick marble stone counters, vanities etc over item No 8.2 including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in Charge Marble work		3	Metre
42	42	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work		328	Sqm
43	43	Providing and fixing on wall face unplasticised –Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes (a) 75mm diameter		8	Metre
44	44	(b) 110mm diameter		15	Metre
45	45	Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. (a) Coupler 110 mm		6	Each
46	46	(b) Single tee with door 110x110x110mm		2	Each
47	47	Bend 87.5*110mm bend		2	Each
48	48	Providing and fixing un-plasticised PVC Pipe clips of approved design to un-plasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc complete.110mm		10	Each
49	49	12mm cement plaster of mix 1:6(1 cement:6 fine sand)		1356	Sqm
50	50	15mm cement plaster of mix 1:6(1 cement:6 fine sand)		425	Sqm
51	51	6mm cement plaster to ceiling of mix 1:3(1cmeent: 3 fine sand)		132	Sqm
52	52	Finishing walls with water proofing cement paint of required shade New work (two or more coats applied @ 3.84 kg/10 sqm)		352	Sqm
53	53	Distempering with first quality acrylic washable (ready made) of approved manufacture and of required shade/colour complete as per manufacturer’s specifications-two or more coats on new work. Total plaster area :		915	Sqm
54	54	Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work		127	Sqm
55	55	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work		127	Sqm
56	56	Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of WC kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound impermo of Snowcem or equivalent conforming to IS: 2645 in recommended proportions. (ii) IInd course of 20mm cement plaster 1:3(1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area (iv) IVth course of 400 micron thick PVC sheet (overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm		15	Sqm
57	57	Providing and fixing white vitreous china pedestal type water closet (European type WC Pan) with seat and lid 10 litre low level white PVC flushing cistern with manually controlled deice (Handle lever) conforming to IS 7231 Parryware/ Hindware/Seabird/ Orient (Coral)/ Hindustan/ Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C pan with ISI Marked black solid plastic seat and lid		2	Each
58	58	Providing and fixing wash basin with CI/MS brackets 15mm C P Brass pillar taps, 32mm CP Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. Wash basin size 630x450mmwith a single 15mm CP Brass pillars taps		2	Each
59	59	Providing and fixing Salem Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with CI Brackets, and Stainless Steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. 470x420mm bowl depth 178 mm		1	Each
60	60	Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 32mm dia flexible pipe		3	Each
61	61	Providing and fixing 100mm Stainless Steel grating for gully, floor or Nahani trap		5	Each
62	62	Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.		2	Each
63	63	Providing and fixing PVC terminal guard 100 mm		2	Each
64	64	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 100mm outlet		5	Each
65	65	Providing and fixing PTMT towel ring trapezoidal shape 215mm long, wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour weighing not less than 88 gm		2	Each
66	66	Providing and fixing GI Pipes complete with GI fittings and clamps, including cutting and making good the walls. (a) 15 mm dia. nominal bore		15	Metre
67	67	(b) 20 mm dia. nominal bore		20	Metre
68	68	Providing and fixing ball valve (brass) of approved quality complete 20mm nominal bore		2	Each
69	69	Providing and fixing un-plasticised PVC connection pipe with brass unions 15mm bore, 45 cm long		5	Each
70	70	Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore		4	Each
71	71	Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931 a)15mm nominal bore		5	Each
72	72	Providing and fixing C.P brass soap dish		2	Each
73	73	Providing and placing on terrace polyethylene water storage tank ISI: 12701 marked indicating the BIS Licence No. With cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank.		1000	Litre
74	74	Providing, laying and jointing Glazed Stoneware Pipes grade A with stiff mixture of cement mortar in proportion of 1:1 (1 cement: 1 fine sand) incl. testing of joints etc. Complete. and Laying in position cement concrete 1:5:10(1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) around pipes incl. Bed conc. As per standard design.-150 mm pipes- 150 mm dia.		10	Metre
75	75	Providing and Laying in position cement concrete 1:5:10(1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) around pipes incl. Bed conc. As per standard design.-150 mm pipes		10	Metre
76	76	Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) ) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3(1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement and making channels in cement conc. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 80x90 cm and 45 cm deep incl. C.I cover with frame (Light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of and weight of frame 15 kg) With FPS bricks with class designation 75 and with Crushed stone aggregate.		5	Each
77	77	Making Soak Pit 2.50 m dia. 3.00 m deep with 45x45 cm dry honeycomb shaft with bricks of class designation 75 and SW drain pipe 100 mm dia. 1.80 m long complete as per standard design. With FPS bricks with		2	Each
78	78	Providing and installing water lift pump 1HP incl. all accessories		1	Each
79	79	Earth work in excavation by mechanical means (Hydraulic Excavator) over areas(exceeding 30 cm and upto 1.50 mtr in depth, 1.50 mtr in width as well as 10 sqm on plan) incl. disposal of excavated earth lead upto 50 m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed. All kinds of soils.		495	Cum
80	80	Providing and fixing G.I. Chain Link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm wire and nuts, bolts and washers as required complete as per directions of Engineer-in Charge. Made of G.I. wire of dia. 4 mm.		225	sqm
81	81	Preparing of sub grade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller including making good the undulations etc. and disposal of surplus earth up to 50 m.		440	sqm
82	82	Consolidation of sub grade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or qrarry spoils etc. and rerolling the sub grade.		440	sqm
83	83	Supplying and stacking of graded stone aggregate at site of size range (a) 63 mm to 45 mm (quarry)		47	cum
84	84	(b) 53 mm to 22.4 mm (quarry)		24	cum
85	85	Laying water bound macadam with specified stone aggregate, stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to tonne capacity etc. complete (payment for stone aggregate, screenings, kankar, moorum and red bajri etc. to be made separately). (a) Base course with 63 mm to 45 mm size including stone screenings 13.2 mm size		47	cum
86	86	(b)Base course with 53 mm to 22.4 mm size including stone screenings 11.2 mm size		24	cum
87	87	Supplying and stacking of good earth at site, excluding carriage		7	cum
88	88	Supplying and stacking of good earth at site, excluding carriage( a) 13.2 mm nominal size (Type A)		7	cum
89	89	(b) 11.2 mm nominal size (Type A)		4	cum
90	90	Scarifying metalled (water bound) road surface including disposal of rubbish lead up to 50 m and consolidation of the aggregate received from the scarifying with power road roller of 8 to 10 tonne capacity.		280	sqm
91	91	Providing and applying tack coat using hot straight run bitumen of grade 80/100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On WBM @ 0.75 kg/sqm		280	sqm
92	92	2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately) With paving asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt		280	sqm
93	93	Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80/100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller, all complete.		280	sqm
94	94	INTERNAL ELECTRIFICATION		1	job
95	95	Submission of Complete structural Design including plan elevation etc. Approved from Authorized Competent Authority.(Consultancy Charges)		1	job

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Control Room Building And Development Works At 3 . 15Mva , 33/11Kv Receiving Station Swajian , District Poonch On Turn Key Basis, Kalakote-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Control Room Building And Development Works At 3 . 15Mva , 33/11Kv Receiving Station Swajian , District Poonch On Turn Key Basis, Kalakote-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us