Supply Of Miscellaneous Goods, JARANWALI GALI-Jammu And Kashmir

Supply Of Miscellaneous Goods-1 Provision Of Miscellaneous Goods ( Aios Maint ) As Per Items Ser No 1.01 To 1.20 For Jaranwali Gali ( Quantity May Vary At The Time Of Placement Of Supply Order ) . 2 Laip A Type ( Y Shaped ) ( 75 X 75 X 6Mm ) 4.215 M Long Minimum Weight 28.662 Kgs With Tolerance +5% And -2%, Having Notches 18 Nos . Steel To Be Conforming To Is 2062. Make : Sail / Tata / Jindal. 3 Laip B Type ( 65 X 65 X 6Mm ) 2.55 M Long Minimum Weight 14.79 Kgs With Tolerance +5% And -2% , Having Notches 11 Nos . Steel To Be Conforming To Is 2062. Make : Sail / Tata / Jindal. 4 Laip C Type ( 65 X 65 X 6Mm ) 2.25 M Long Minimum Weight 13.05 Kgs With Tolerance +5% And -2%, Having Notches 9 Nos . Steel To Be Conforming To Is 2062. Make : Sail / Tata / Jindal. N 5 Laip D Type ( 65 X 65 X 6Mm ) 1.35M Long Minimum Weight 7.83Kgs With Tolerance +5% And -2% Having Notches 2 Nos . Steel To Be Conforming To Is 2062. Make : Sail / Tata / Jindal. N 6 Punch Tape Low Carbon Steel Strip Of 19Mm Wide 0.5Mm Thick Having Strip Of Sharp Barbs, Punched All Along The Length. The Punched Tape And The Core Wire Are Electro Galvanised To Provide Protection From Outdoor Exposure. The Punched Tape Will Be Coiled In A Spool Of 50 Mtr Length Having Weight Of 2.66 Kg With Tolerance Ordnance Pattern Type. As Per Specification No Cqae / 5660 / 1515 / 2001 / 284 Nos& Drg No Imca 0113 / 4, Imsa 0289 / A, Impd-1919 And Impd 820. 04 Strands Of Punched Tape Low Carbon Steel Strip Shall Be Provided On Each Side At Regular Interval 7 Barbed Wire 2.24Mm Dia Minimum Length Of 450M In 50 Kgs Of Roll. Galvanised Barbed Wire Shall Be Of 2 Strands Conforming To Is 278-1978. It Shall Consist Of 2 Line Wires Of 2.24Mm Dia With Dia Of Barbs 2Mm At 75Mm Centre To Centre. The Barbs Shall Have A Length Not Less Than 13Mm And Not More Than 18Mm With Sharp Pointed Edges. The Line And Point Wires Shall Be Circular In Section. Free From Scales And Other Defects And Shall Be Uniformly Galvanized. The Lines Wire Shall Not Contain Any Welds And Should Be Continious. 8 Punched Tape Concertina Coil: 1050Mm Dia Punched Type Concertina Coil ( Incl Spike And Handle ) With A Spiral Of 50 Turns Having A 2.6Mm Dia Core Wire Of High Carbon Spring Steel Of High Tensile Strength Having Series Of Sharp Bards Punched All Long The Length On Both The Side Of Strips At Regular Interval. The Punched Tape And The Core Wire Formed Into A Coil Are Electrogalvanised To Provide Protection Against Outdoor Exposure. The Punched Tape Is Mechanically Crimped Over The Cover Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil, The Individual Turns Of The Coil Are Connected To Each Other By Steel Clips, So That It Can Be Opened Up Like An Accordion. The Width Of Barbed As 9Mm And Spacing Of Clips 23.5Mm To 24.5Mm C / C. Two Handles And One Spike Will Be Provided At Each Side Of The Spiral To Facilitate Ease Of Handling And Anchoring Of The Coil To Ground. The Length Of The Coil When Opened Up Will Be 15M With An Effective Height Of 915Mm. The Punched Tape Concertina Coil Consist Of Various Components Like Punched Tape, Spring Steel, Coil Wire. Clip Handle And Spike. The Punched Tape Concertina Coil Including Handle And Spike, Weight Approximately 15.2 Kg ( + / - ) 5% Tolerance Per Coil. Coil Will Be Wound With Bituminized Hessian Cloth To Provide Protective Packing And Ord Pattern As Per Specification No Ind / Eng / Prov / 1245 / B ( Except Clause 11 & 12 ) For Raw Material And Drawings Imga 0112 / B ( Sheet 1&2 ) , Imga 0112 / C ( Sheet 2 Of 2 ) , Impd 1817 / B, Impd- 1821 / B And Impd 1822 / B. 9 Gi Binding Wire 0.90 Mm Dia Confirming To Is 2062 / 1991 10 Baby Coil : Punched Tape Concertina Coil ( Excluding Spike And Handle ) In 610 Mm Dia With 50 Turns Having 2.60 Mm Dia Of High Carbon Spring Steel High Tensile Core Wire As Per Is-4454 ( Part-I ) . The Punched Tape 0.5 Mm Thick And 19.0 Mm Wide As Per Specification Is-513 ( Dd Grade ) Is Mechanically Crimped Over Core Wire And Then Formed Into A Cell. At Various Part Of The Periphery Of The Coil The Individual Turns Of The Coil Are Connected To Each Other With 5 Steel Clips ( Total 129 Nos Per Coil ) Equally Spaced So That It Opens Up Like An Accordion. The Weight Of Each Coil Will Be 9.5 Kgs ( + / - 5% ) Without Packing Material. The Coil When Opened Up To 7.50 Meters Length The Effective Height Of Coil Will Be 590 Mm. Each Coil Wound With Bituminized Hessian Cloth For Providing Protective Coating As Per Specifications No.Cqae / 5600 / 1602 / A For Raw Material And Drawings Imga-0112 / B ( Sheet 1 Of 2 ) , Imga-0112 / C ( Sheet 2 Of 2 ) . Impd-1817 / B, Impd-1820, Impd-1821 / B And Impd-1822 / B. 11 Steel Roofing Trough Isi Marked 1830 Mm Long Made Out Of 2Mm Thick @ 27 Kg Each With Tolerance -2% To +5%, Hot Rolled Carbon Steel Sheet Confirming To Is Specification With 16 Nos 12Mm Dia Long Bolt, Machine Made ( Heavy Duty Complete Threaded With One Nut And Tow Washers Of 30Mm Outer Diameteer And 3 Mm Thick, Per Bolt, Per Srt. The Overall Width Of Srt Shall Be 613Mm And Height Shall Be 180Mm. The Shape Of Srt Shall Be Regular And Angle Of Bending Shall Be Maintained Properly. The Srt Not Found Properly In Shape Shall Be Rejected. Make : Tata / Sail / Jindal ( Isi Marked ) . 12 Steel Roofing Trough ( Srt ) : Steel Roofing Trough Isi Marked 3050Mm Long Made Out Of 2 Mm Thick @ 47.89 Kg Each With Toleravce -2% To +5%, Hot Rolled Carbon Steel Sheet Congirming To Is Specigication With 16 Nos 12Mm Dia 25Mmlong Bolt, Machine Made ( Heavy Duty Completed Threaded With One Nut And Two Washers Of 30 Mm Outer Diameter And 3Mm Thick, Per Bolt Per Srt / . The Overall Width Of Srt Shall Be 613Mm , And Height Shall Be 180Mm. The Srt Shall Be Applied With One Shop Coatof Red Oxide Primer. The Shape Of Srt Shoall Be Regular And Angle Of Bending Shlall Be Maintained Properly. The Srt Not Found Properly In Shape Shall Be Rejected, Make : Tata, Sail, Jindal Isi Marked. 13 Steel Cage Of Size 900X600x750mm Made Out Of 8Mm Tmt Bars Welded Together @ 150Mm Cc In Each Panels ( 04 Side Walls ) , Panels Inter Connected With 10Mm Tmt Bar Ring 05 Nos For Each Corner, Four Clamps ( 5Mm Thick ) At Corners On Top With Nut Bolt Arrangements ( Ø 6Mm Nut Size ) Painted With One Coat Of Zinc Primer. ( Total Weight -15.2 Kg ) . Sample To Be Got Approved Before Bulk Supply. Make : Tata / Sail / Jindal 14 Tor Panels Of Size 3.00X1.25 M Made Up Of 10 Mm Dia @ 150 C / C, Horizontal Bar 10Mm Dia Tmt Bar 7 Nos And Vertical Bar 10Mm Dia Tmt Bar 19 Nos. Tor Steel Confirming To Is-1772-1971 Weight Of Tor Panel Should Be 28.5 Kg + 5% And All Adjacent Members To Welded As Per Specifications And Drawing Att Including One Coat Of Red Oxide Primer & One Coat Of Red Paint Alongwith Following Accessories :- N ( I ) Clamps Consisting Of Two Nos Ms Plate Of Size ( Lxbxt ) 140X30x4mm With Three Nos Of Holes. No -2 N ( Ii ) Three Nos 10X100mm Full Threaded Nut And Bolt. Both The Extreme Bolts To Be Welded For More Suitability. Make : Tata / Sail / Jindal. N 15 Hdpe Sand Bags ( Uv Proofed ) Barrel Type Double Stitched At One End Std Quality Double Colour Brown And Size 840 Mm X 360 Mm Nylon With Suitable Tying Cord As Per Is 14252 / 1995. Weight Should Not Less Than 85 Gms As Per Sample Approved By This Regiment. 16 U Clip Made Of Ms Bar Of Size 8Mm Dia 200 Mm Length And 100Mm Wide. 17 Panjis 5 Prong With V Notch Made Of 8Mm Dia Ms Bar, Total Weight Of 6 Kg + 2% 18 Cgi Sheet 10 X 3 & Thickness 0.63Mm 120 Gsm ( Isi Marked ) . Make: Tata / Sail / Jindal / Bhushan 19 Cgi Sheet 12 X 3 & Thickness 0.63Mm 120 Gsm ( Isi Marked ) . Make: Tata / Sail / Jindal / Bhushan 20 Pvc Insulated Cable 1 Sqmm Aluminium Conductor Multi Strand 2 Core Isi Marked Make : Klick / Plaza / Kalinga 21 Pvc Insulated Cable 1.5 Sqmm Multi Stand Copper Conductor Make : Finolex / Havelles / Polycab

Refer document

INR 170000.0 /-

INR 34 Lakhs /-

Name of Work: PROVISION OF MISCLLANEOUS GOODS (AIOS MAINT) (JOB-6066)
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Provision of Miscellaneous Goods (AIOS Maint) as per items ser No 1.01 to 1.20 for Jaranwali Gali (Quantity may vary at the time of placement of supply order).
2	1.01	LAIP 'A' type (Y shaped) (75 x 75 x 6mm) 4.215 m long minimum weight 28.662 kgs with tolerance +5% and -2%, having notches 18 Nos . Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.	item1	240	Nos
3	1.02	LAIP 'B' type (65 x 65 x 6mm) 2.55 m long minimum weight 14.79 kgs with tolerance +5% and -2% , having notches 11 Nos . Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.	item2	240	Nos
4	1.03	LAIP 'C' type (65 x 65 x 6mm) 2.25 m long minimum weight 13.05 kgs with tolerance +5% and -2%, having notches 9 Nos . Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.\n	item3	100	Nos
5	1.04	LAIP 'D' type (65 x 65 x 6mm) 1.35m long minimum weight 7.83kgs with tolerance +5% and -2% having notches 2 Nos . Steel to be conforming to IS 2062. Make : SAIL/TATA/JINDAL.\n	item4	100	Nos
6	1.05	Punch tape low carbon steel strip of 19mm wide 0.5mm thick having strip of sharp barbs, punched all along the length. The punched tape and the core wire are electro galvanised to provide protection from outdoor exposure. The punched tape will be coiled in a spool of 50 mtr length having weight of 2.66 Kg with tolerance ordnance pattern type. As per specification No CQAE/5660/ 1515/ 2001/ 284 NOS& drg No IMCA 0113/4, IMSA 0289/A, IMPD-1919 and IMPD 820. 04 strands of punched tape low carbon steel strip shall be provided on each side at regular interval	item5	120	Spool
7	1.06	Barbed wire 2.24mm dia minimum length of 450m in 50 Kgs of roll. Galvanised Barbed wire shall be of 2 strands conforming to IS 278-1978. It shall consist of 2 line wires of 2.24mm dia with dia of barbs 2mm at 75mm centre to centre. The barbs shall have a length not less than 13mm and not more than 18mm with sharp pointed edges. The line and point wires shall be circular in section. Free from scales and other defects and shall be uniformly galvanized. The lines wire shall not contain any welds and should be continious.	item6	240	Kgs
8	1.07	Punched tape concertina coil: 1050mm dia punched type concertina coil (incl spike and handle) with a spiral of 50 turns having a 2.6mm dia core wire of high carbon spring steel of high tensile strength having series of sharp bards punched all long the length on both the side of strips at regular interval. The punched tape and the core wire formed into a coil are electrogalvanised to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil, the individual turns of the coil are connected to each other by steel clips, so that it can be opened up like an accordion. The width of barbed as 9mm and spacing of clips 23.5mm to 24.5mm C/C. Two handles and one spike will be provided at each side of the spiral to facilitate ease of handling and anchoring of the coil to ground. The length of the coil when opened up will be 15m with an effective height of 915mm. The punched tape concertina coil consist of various components like punched tape, spring steel, coil wire. Clip handle and spike. The punched tape concertina coil including handle and spike, weight approximately 15.2 kg (+/-) 5% tolerance per coil. Coil will be wound with bituminized hessian cloth to provide protective packing and Ord pattern as per specification No IND/ENG/ PROV/ 1245/B (Except Clause 11 & 12) for raw material and drawings IMGA 0112/B (Sheet 1&2), IMGA 0112/C (Sheet 2 of 2), IMPD 1817/B, IMPD- 1821/B and IMPD 1822/B.	item7	240	Coil
9	1.08	GI Binding Wire 0.90 mm dia confirming to IS 2062/1991	item8	90	Kgs
10	1.09	BABY COIL : Punched Tape Concertina Coil (excluding spike and handle) in 610 mm dia with 50 turns having 2.60 mm dia of high carbon spring steel high tensile core wire as per IS-4454 (Part-I). The Punched Tape 0.5 mm thick and 19.0 mm wide as per specification IS-513 (DD Grade) is mechanically crimped over core wire and then formed into a cell. At various part of the periphery of the coil the individual turns of the coil are connected to each other with 5 steel clips (total 129 Nos per coil) equally spaced so that it opens up like an accordion. The weight of each coil will be 9.5 Kgs (+/- 5%) without packing material. The coil when opened up to 7.50 meters length the effective height of coil will be 590 mm. Each coil wound with bituminized hessian cloth for providing protective coating as per specifications No.CQAE/5600/1602/a for raw material and drawings IMGA-0112/B (Sheet 1 of 2), IMGA-0112/C (Sheet 2 of 2). IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B.	item9	140	Coil
11	1.1	Steel Roofing Trough ISI Marked 1830 mm long made out of 2mm thick @ 27 kg each with tolerance -2% to +5%, hot rolled carbon steel sheet confirming to IS specification with 16 Nos 12mm dia long bolt, machine made (heavy duty complete threaded with one nut and tow washers of 30mm outer diameteer and 3 mm thick, per bolt, per SRT. The overall width of SRT shall be 613mm and height shall be 180mm. The shape of SRT shall be regular and angle of bending shall be maintained properly. The SRT not found properly in shape shall be rejected. Make : TATA/Sail/Jindal (ISI marked).	item10	140	Nos
12	1.11	Steel Roofing Trough (SRT) : Steel Roofing Trough ISI marked 3050mm long made out of 2 mm thick @ 47.89 Kg each with toleravce -2% to +5%, hot rolled carbon steel sheet congirming to IS specigication with 16 Nos 12mm dia 25mmlong bolt, machine made (heavy duty completed threaded with one nut and two washers of 30 mm outer diameter and 3mm thick, per bolt per SRT/. The overall width of SRT shall be 613mm , and height shall be 180mm. The SRT shall be applied with one shop coatof red oxide primer. The shape of SRT shoall be regular and angle of bending shlall be maintained properly. The SRT not found properly in shape shall be rejected, Make : TATA, Sail, Jindal ISI marked.	item11	140	Nos
13	1.12	Steel cage of size 900x600x750mm made out of 8mm TMT bars welded together @ 150mm CC in each panels (04 side walls), panels inter connected with 10mm TMT bar ring 05 Nos for each corner, four clamps (5mm thick) at corners on top with nut bolt arrangements (ø 6mm nut size) painted with one coat of zinc primer. (Total weight -15.2 Kg). Sample to be got approved before bulk supply. Make : TATA/ SAIL/ JINDAL	item12	330	Nos
14	1.13	TOR Panels of size 3.00x1.25 m made up of 10 mm dia @ 150 C/C, horizontal bar 10mm dia TMT bar 7 Nos and vertical bar 10mm dia TMT bar 19 Nos. TOR steel confirming to IS-1772-1971 weight of TOR panel should be 28.5 Kg + 5% and all adjacent members to welded as per specifications and drawing att Including one coat of red oxide primer & one coat of red paint alongwith following accessories :- \n(i) Clamps consisting of two Nos MS plate of size (LxBxT) 140x30x4mm with three Nos of holes. No -2\n(ii) Three Nos 10x100mm full threaded nut and bolt. Both the extreme bolts to be welded for more suitability. Make : TATA/ SAIL/ JINDAL.\n	item13	150	Nos
15	1.14	HDPE sand bags (UV proofed) barrel type double stitched at one end std quality double colour brown and size 840 mm x 360 mm Nylon with suitable tying cord as per IS 14252/ 1995. Weight should not less than 85 gms as per sample approved by this Regiment.	item14	20000	Nos
16	1.15	U clip made of MS Bar of size 8mm dia 200 mm length and 100mm wide.	item15	140	Nos
17	1.16	Panjis 5 Prong with 'V' Notch made of 8mm dia MS bar, total weight of 6 Kg + 2%	item16	140	Nos
18	1.17	CGI Sheet 10' x 3' & Thickness 0.63mm 120 GSM (ISI marked). Make: TATA/SAIL/JINDAL/BHUSHAN	item17	200	Nos
19	1.18	CGI Sheet 12' x 3' & Thickness 0.63mm 120 GSM (ISI marked). Make: TATA/SAIL/JINDAL/BHUSHAN	item18	200	Nos
20	1.19	PVC insulated cable 1 Sqmm aluminium conductor multi strand 2 core ISI Marked Make : Klick / Plaza / Kalinga	item19	1900	Mtrs
21	1.2	PVC insulated cable 1.5 sqmm multi stand copper conductor Make : Finolex/Havelles/Polycab	item20	3062	Mtrs