| 1 | 1 | M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash on walls all as specified. | | 200 | Sqm |
|---|
| 2 | 2 | -Ditto- all as per item No 1 above but one coat of oil bound distemper on Ceiling.. | | 400 | Sqm |
|---|
| 3 | 3 | -Ditto- all as per item No 1 above but one coat of oil bound distemper on walls. | | 1500 | Sqm |
|---|
| 4 | 4 | -Ditto- all as per item No 1 above but two coat of oil bound distemper on walls. | | 1500 | SQM |
|---|
| 5 | 5 | M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty all as specified. | | 1800 | Sqm |
|---|
| 6 | 6 | M&L for complete removal of existing treatment from wall or similar surfaces applying 3 mm thick wall care putty on wall surfaces and well rubbing for making smooth and uniform surface with sand paper then applying two coats of plastic emulsion paint in different patterns shade with rolling instrument including preparation of old decorative surfaces etc all as specified. | | 300 | Sqm |
|---|
| 7 | 7 | M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth all as specified. | | 500 | Sqm |
|---|
| 8 | 8 | -Ditto- all as per item No 7 above but on steel surfaces. | | 500 | Sqm |
|---|
| 9 | 9 | M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc | | 500 | SQM |
|---|
| 10 | 10 | M&L for applying 3mm thick wall care putty on ceiling, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc | | 100 | SQM |
|---|
| 11 | 11 | Taking down cement plaster including racking out hacking for keys scrubing down with water including removal of debrises all as specified and directed complete. | | 150 | Sqm |
|---|
| 12 | 12 | M&L for rendering 15 mm thick in CM 1:6 on brick works or concrete surfaces or similar surfaces of wall etc | | 150 | Sqm |
|---|
| 13 | 13 | M&L two coats of oil bound distemper on newly plastered surfaces of walls Over a coat of primer complete including necessary preparation. | | 150 | SQM |
|---|
| 14 | 14 | M&L for refixing (taking down, easing and adjusting and also refixing builders hardware as required) shutters of any description exc 1 sqm but not exc 2 sqm in the same opening after repairing including renewal of unserviceable screws etc. | | 80 | EACH |
|---|
| 15 | 15 | S & F in repairs 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed concealed complete to walls ceiling or laid in floors all as specified and directed. | | 25 | RM |
|---|
| 16 | 16 | S&F in repair 15mm bore bib taps, fancy type brass chromium plated with crutch or battery handle screwed down, screwed for iron pipe or brass ferule. | | 12 | EACH |
|---|
| 17 | 17 | S & F in repair 15mm chromium plated swivel shower rose with or without swivel joints sny size for fixing with 15 mm pipe incl shower arm 15 mm size , 195 mm long with bend of 45 degree. | | 15 | EACH |
|---|
| 18 | 18 | Hacking out old broken glass (any thicknesss, size,quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads | | 16 | Sqm |
|---|
| 19 | 19 | S&F 3mm thick ordinary quality sheet glass glazing with u-pin and oil putty n.exc 0.5 sqm each pane in square/ rectangle shape and size cutting and fixing including removing debrises from site etc all as specified. | | 16 | Sqm |
|---|
| 20 | 20 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises | | 60 | Sqm |
|---|
| 21 | 21 | M & L Non Skid coloured ceramic jointless tiles 7 to 8mm thick in floors, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm. laid over & including screed bedding 15 mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified. | | 15 | Sqm |
|---|
| 22 | 22 | M&L Glazed coloured ceramic jointless tiles 300mmx200mmx7mm thick on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over & including 10 mm thick cement plaster in CM 1:4 all as specified | | 10 | Sqm |
|---|
| 23 | 23 | M&L for coloured printed non skid ceramic tiles 7 to 8 mm thich area of each tile exceeding exc 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor complete all as specified and directed. | | 20 | Sqm |
|---|
| 24 | 24 | M&L for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, moulding on edge and polishing over and including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge. | | 10 | Sqm |
|---|
| 25 | 25 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types nd including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge. | | 10 | Sqm |
|---|
| 26 | 26 | Taking down shutters of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge. | | 10 | Each |
|---|
| 27 | 27 | Taking down shutters of size exc 1.5 Sqm and not exceeding 4 Sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge. | | 10 | Each |
|---|
| 28 | 28 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge. | | 10 | Each |
|---|
| 29 | 29 | S & F Factory made Steel windows, ISI marked, with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified. | | 5 | Sqm |
|---|
| 30 | 30 | All as per item No. 29 here-in-before but without glazing bars | | 5 | Sqm |
|---|
| 31 | 31 | S&F factory made, 35 mm thick plain framed, panelled shutter (four panel) with lock rail using 2nd class H.W (Siras or any second class Hard wood as approved by GE ), kiln seasoned and chemically pressure treated, the size of rail and style as per IS:1003 (Part-I) and panel insert of 9mm thick BWP Phenol formaldehyde bonded commercial facing ply wood, all as specified. | | 5 | Sqm |
|---|
| 32 | 32 | S&F for factory made glazed/ wire gauged/skeleton shutter, 35mm thick out of (well kiln seasoned) 2nd class hard wood (Siras or any second class Hard wood as approved by GE), the size of rails and styles as per IS, chemically pressure treated in factory against termite infestation prepared to receive wire gauge or glass (without sash bars), edges of frame chamfered or rounded, fitted with cut and mitered beads, all as specified. Note: Wire gauge/glazing to be measured and paid separately). | | 10 | Sqm |
|---|
| 33 | 33 | Mild steel frame work such as grills, grating etc. with ends of bars shouldered and or riveted, or forged into spikes : framed guard bars, barred iron doors, ladders, railings and similar work conforming to Fe – 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge. | | 40 | Kg |
|---|
| 34 | 34 | S & F Factory made Solid PVC door frame of size 50 x 47 mm , made out of 5mm plain coloured PVC sheet reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and making good the disturbed surfaces with plastering in CM 1:6 and the rate quoted is inclusive this element, noting extra shall be paid on this account complete all as specified. | | 15 | Rm |
|---|
| 35 | 35 | S & F 30mm thick factory made PVC solid panel PVC door, shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15 x15mmfor top & bottom rails, MS frame shall have a coat of red oxide primer of approved make and shall 'be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2)thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 30mm wide x 5mm thick PVC sheet beading on either side and jointed together with solvent cement adhesive and an additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of 'C' Channel using PVC solvent adhesive complete as per manufacture’s specifications & drawings, all as directed by Engineer-in-Charge. | | 5 | Sqm |
|---|
| 36 | 36 | S& F mild steel medium weight Butt Hinges 100mm long and fixed with steel screws complete all as specified. | | 45 | Each |
|---|
| 37 | 37 | S&F mild steel Tower Bolt 150mm long stove enameled blck with bright bolt | | 10 | Each |
|---|
| 38 | 38 | S&F MS sliding door bolt, plate type, stove enamelled, black with bright bolt not less than 12mm dia, length of bolt 250mm, including a minimum of 6 bolts, nuts and washers, four on bolt plate and two on staple plate complete all as specified. | | 5 | Each |
|---|
| 39 | 39 | Mild steel pressed handles, 150 mm long, oval type, stove enamelled, black, ISI marked complete all as specified and as directed by Engineer-in-Charge. | | 20 | Each |
|---|
| 40 | 40 | S&F aluminium handles, cast type, anodised 150 mm long all as specified and directed by Engineer-in charge. | | 10 | Each |
|---|
| 41 | 41 | S&F Aluminium, anodised, barrel tower bolts of extruded section150mm long stove enameled blck with bright bolt | | 20 | Each |
|---|
| 42 | 42 | Supply and fixing in repairs 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. | | 10 | Each |
|---|
| 43 | 43 | S&F in repair vitreous china wash hand basin size 450x300mm white flat back including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. | | 5 | Each |
|---|
| 44 | 44 | S & F in replacement Vitreous China squatting pan, of ‘Orissa pattern ‘ white of size 580 X 440 mm, with integral foot rests and 'P' or 'S' trap including provision of lime concrete bedding minimum 150 mm thick (1 lime, 2 sand or surkhi and 5 aggregate) complete all as specified. | | 5 | Each |
|---|
| 45 | 45 | S& F in replacement Vitreous China wash down water closet pan (pedestal pattern) complete all as specified. | | 4 | Each |
|---|
| 46 | 46 | S & F in replacement PVC 10 ltrs , valveless, syphonic action type, flushing cistern, white, low level, with inlet, ball valve, float and handle, including 32 mm bore flush pipe brackets all as specified. | | 15 | Each |
|---|
| 47 | 47 | S & F in replacement Rotational moulded polyethylene water storage tanks 2 layers of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. | | 4 | Each |
|---|
| 48 | 48 | S&F in repair wash basin mixer chromium plated, fancy type, 15mm bore for mixing hot and cold water screwed down for iron pipe complete all as specified. | | 10 | Each |
|---|
| 49 | 49 | S & F in repairs concealed brass CP stop cock 15 mm screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe for union and fixed complete all as specified. | | 10 | Each |
|---|
| 50 | 50 | S & F in repairs Stop valves 15mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified. | | 20 | Each |
|---|
| 51 | 51 | S&F sinks in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified in Engr-in-Charge. | | 5 | Each |
|---|
| 52 | 52 | S & F in repair curtain rail/rod of CP in wooden pattern finish of 18/19 mm with decorative brackets as specified by Engr-in-Charge complete. | | 50 | RM |
|---|
| 53 | 53 | S&F in repairs galvanized galvanised steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed including a coat of French blue paint all as specified | | 50 | Sqm |
|---|
| 54 | 54 | S&F in repair 18/19 mm thick block board of commercial type Gde-I quality fixed with screws as in cup boards shutters & shelves and pelmet boxes etc all as directed. | | 10 | Sqm |
|---|
| 55 | 55 | S & F Stainless steel plate rack of size 900x600x450 mm as specified by Engr-in- Charge. | | 3 | Each |
|---|
| 56 | 56 | S&F in repair PVC waste pipe flexible type 25mm dia suitable for couplings 32mm & 40mm dia 600mm long.MAKE: SYMET PRAYAG. | | 50 | Each |
|---|
| 57 | 57 | S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges. | | 20 | Each |
|---|
| 58 | 58 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of length 140 mm | | 15 | Each |
|---|
| 59 | 59 | S&F in repair brass CP waste coupling (half or full threaded) of 100 mm size\n | | 20 | Each |
|---|
| 60 | 60 | S&F in repair brass CP waste coupling (half or full threaded) of 75 mm size\n | | 15 | Each |
|---|
| 61 | 61 | Providing and fixing 100 mm stainless steel gratingwith hole of approved make and quality grade 304 on top of floor trap. | | 42 | Each |
|---|
| 62 | 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. | | 0.5 | Qtl |
|---|
| 63 | 63 | Providing and fixing 15mm dia C.P. brass bib cocks with wall flanges including cutting and making good the walls wherever required.\nLong body bib tap Make: Jaquar Cat No. 107 | | 4 | Each |
|---|
| 64 | 64 | Taking down aluminium shutters n exc 1.5 sqm and refixing the same after necessary repairing/greesing work complete all as specified and directed.\nNOTE:- Material consumed in repairing paid separately. | | 10 | Each |
|---|
| 65 | 65 | Ditto as per Item No. 64 above but exc 1.5 sqm but n exc 4 sqm. | | 10 | Each |
|---|
| 66 | 66 | S & F anodized aluminum section for slidings, windows, ventilators, door partition including facbrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. \n | | 20 | Kgs |
|---|
| 67 | 67 | S&F Aluminium grill (DG 104) 10mm x 5.2mm thick fixed on aluminium section of suitable size fixed to aluminium window / ventilator all as specified. | | 15 | Sqm |
|---|
| 68 | 68 | S&F 5mm thick Sheet/tinted glass ordinary quality and glazing in aluminium frame n exc 0.50 Sq. m all as specified. | | 10 | Sqm |
|---|
| 69 | 69 | S&F 5mm thick Sheet/tinted glass ordinary quality and glazing in aluminium frame exc 0.50 Sq. m all as specified. | | 5 | Sqm |
|---|
| 70 | 70 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed | | 3 | Each |
|---|
| 71 | 71 | S&F brass Mortice lock 4 lever, vertical type, size 75mm complete all as specified . | | 2 | Each |
|---|
| 72 | 72 | S&F single lever Basin mixer of make johnson cat No. T0745C | | 2 | Each |
|---|
| 73 | 73 | S&F fancy type stainless steel long nose bib cock of make johnson cat No. T0106C | | 2 | Each |
|---|
| 74 | 74 | S&F fancy type wall mixer Two in one with bend pipe of make johnson cat No. T0121C | | 2 | Each |
|---|
| 75 | 75 | S&F fancy type concelaed stop cock of make johnson cat No. T0213C | | 2 | Each |
|---|
| 76 | 76 | S&F fancy typewall mixer three in one with bend pipe of make johnson cat No. T0423C | | 2 | Each |
|---|
| 77 | 77 | S&F fancy type sink mixer with swivel spout of make johnson cat No. T1620C | | 2 | Each |
|---|
| 78 | 78 | S&F fancy type singleflow shower with shower arm 50 mm of make johnson cat No. S1813C | | 1 | Each |
|---|
| 79 | 79 | S&F fancy type fantasia health faucet of make johnson cat No.S1426C | | 2 | Each |
|---|
| 80 | 80 | S&F fancy typewaste coupling full threaded of make johnson cat No. T0062C | | 2 | Each |
|---|
| 81 | 81 | S&F fancy typetowel rod of make johnson cat No. T0350C | | 2 | Each |
|---|
| 82 | 82 | S&F fancy type towel ring of make johnson cat No. T0351C | | 2 | Each |
|---|
