| 1 | 1 | CIVIL WORKS | BI01010001010000000000000515BI0100001112 | | |
| 2 | 2 | 15.7.4\nDemolishing brick work manually / by mechanical means including stacking of serviceable material and\ndisposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In\ncement mortar | BI01010001010000000000000515BI0100001113 | 5.831 | m3 |
| 3 | 3 | 5.9.5\nCentering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,\ngirders bressumers and cantilevers | BI01010001010000000000000515BI0100001114 | 1.896 | m2 |
| 4 | 4 | 5.9.3\nCentering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,\nlandings, balconies and access platform | BI01010001010000000000000515BI0100001115 | 8.682 | m2 |
| 5 | 5 | 5.2.2\nReinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth\nand string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level\nexcluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand :\n3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001116 | 1.012 | m3 |
| 6 | 6 | 5.22A.6\nSteel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and\nbinding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001117 | 91.08 | kg |
| 7 | 7 | 50.6.5.2\nHollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available\nsize confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in:\nCM 1:6 ( 1 cement : 6 coarse sand ) etc complete | BI01010001010000000000000515BI0100001118 | 2.022 | m3 |
| 8 | 8 | 4.1.8\nProviding and laying in position cement concrete of specified grade excluding the cost of centering and\nshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40\nnominal size) | BI01010001010000000000000515BI0100001119 | 0.462 | m3 |
| 9 | 9 | 21.1.1.2\nProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up\nstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :\n733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the\ngaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.\nAluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever\nrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel\nscrews, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium\n(minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001120 | 262.098 | kg |
| 10 | 10 | 21.2.2\nProviding and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood\nparticle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows\nshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural\ndrawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination\non both sides | BI01010001010000000000000515BI0100001121 | 54.917 | m2 |
| 11 | 11 | 21.3.2\nProviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM\nrubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -\nin -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50\nmm thickness | BI01010001010000000000000515BI0100001122 | 30.888 | m2 |
| 12 | 12 | Supplying and fixing etching sticker on existing glazed portion of Aluminum partition wall including all\nlabour charges cost of materials etc. complete | BI01010001010000000000000515BI0100001123 | 30.888 | m2 |
| 13 | 13 | 21.12.2\nProviding and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with\nS.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50\nmicron aluminium tubular handle bar | BI01010001010000000000000515BI0100001124 | 10 | nos |
| 14 | 14 | 21.13\nProviding and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including\nnecessary cutting and making good etc. complete | BI01010001010000000000000515BI0100001125 | 5 | each |
| 15 | 15 | Providing and fixing Hydraulic door closer bottle type M.S. body with necessary accessories and screws\netc complete | BI01010001010000000000000515BI0100001126 | 5 | each |
| 16 | 16 | 13.7.2\n12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001127 | 40.5 | m2 |
| 17 | 17 | 13.7.1\n12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001128 | 45.469 | m2 |
| 18 | 18 | 8.2.1.2\nProviding and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine\ncut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,\napproved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse\nsand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including\nrubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area\nof slab over 0.50 sqm | BI01010001010000000000000515BI0100001129 | 8.682 | m2 |
| 19 | 19 | 8.3.2\nProviding edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing\nto edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite\nwork | BI01010001010000000000000515BI0100001130 | 15.07 | m |
| 20 | 20 | 13.43.1\nApplying one coat of water thinnable cement primer of approved brand and manufacture on wall\nsurface:Water thinnable cement primer | BI01010001010000000000000515BI0100001131 | 111.996 | m2 |
| 21 | 21 | 13.60.1\nWall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two\nor more coats on new work | BI01010001010000000000000515BI0100001132 | 111.996 | m2 |
| 22 | 22 | 13.61.1\nPainting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or\nmore coats on new work | BI01010001010000000000000515BI0100001133 | 13.479 | m2 |
| 23 | 23 | 11.36\nProviding and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,\nblack of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm\nthick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg\nper sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001134 | 22.177 | m2 |
| 24 | 24 | 11.37\nProviding and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,\nGrey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including\npointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001135 | 4.62 | m2 |
| 25 | 25 | 11.41.2\nProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)\nwith water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints\nwith white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001136 | 130.265 | m2 |
| 26 | 26 | 9.123\nProviding and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC\nfoam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm\nwidth & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm\nx 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor\nfastener as per manufacturer's specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001137 | 10 | m |
| 27 | 27 | 9.124.1\nProviding and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles &rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30\nmm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish | BI01010001010000000000000515BI0100001138 | 3.361 | m2 |
| 28 | 28 | 9.48.2\nProviding and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or\nround bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden\nframes with rawl plugs screws etc | BI01010001010000000000000515BI0100001139 | 163.724 | kg |
| 29 | 29 | 21.10\nProviding and fixing double glazed hermetically sealed glazing in aluminium window, ventilators and\npartition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM\ngasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as\nper specifications, drawings and direction of Engineer-in-Charge complete. | BI01010001010000000000000515BI0100001140 | 8.986 | m2 |
| 30 | 30 | Providing & fixing false ceiling with 12mm thick Gypsum board fixed to a grid made out of anodised aluminium T sections 35x15x1.5 mm size main runners and cross runners mm fixed to main runners placed 600mm c/c both ways so as to form a grid of 600mm square. Frame work suspended from the ceiling by level adjusting hangers of 6mm dia M.S rods fixed to roof slab by means of ceiling cleats.hangers of 6mm dia suspenders shall be placed 600x1200 mm c/c including fixing to the frame with C.P brass screws complete. Providing and fixing anodised aluminium work consisting of tee/angle sections of approved make conforming to IS :733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass /stainless steel sunk screws ,aluminium perimeter angles fixed to wall\nwith rawl plugs @ 450mm centre to centre and fixing the frame work to level adjusting hangers with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge.The board is finished with filling the tapered edges of the board with joining compound etc, Details of cost for 216.14 sqm<br>Consider a shed of 20x10 metres.<br>(External dimensions of plinth).<br>Area of roof-<br>20.2x10.70m = 216.14 sqm. | BI01010001010000000000000515BI0100001141 | 87.547 | m2 |
| 31 | 31 | Providing and fixing 100mm wide vertical blinds of approved shade and texture to windows with nylon\nstrings for adjustments and with locking arrangements including cost and conveyance of all materials,\nlabour charges etc. complete as per standard specifications and directions of the Engineers | BI01010001010000000000000515BI0100001142 | 7.906 | /m2 |
| 32 | 32 | PLUMBING WORKS | BI01010001010000000000000515BI0100001143 | | |
| 33 | 33 | 17.3.2\nProviding and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10\nlitre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm\nflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of\napproved municipal design complete, including painting of fittings and brackets, cutting and making good\nthe walls and floors wherever required :W.c. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001144 | 2 | each |
| 34 | 34 | 18.53.1\nProviding and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality\nconforming to IS: 893115 mm nominal bore | BI01010001010000000000000515BI0100001145 | 4 | each |
| 35 | 35 | 18.32.1\nConstructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4\ncoarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in\ncement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal\nsize), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone\naggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)\n12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common\nburnt clay F.P.S (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001146 | 1 | each |
| 36 | 36 | 17.7.2\nProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste\nof standard pattern, including painting of fittings and brackets, cutting and making good the walls\nwherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass\npillar tap | BI01010001010000000000000515BI0100001147 | 2 | each |
| 37 | 37 | 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws\nwith concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length\nof 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms | BI01010001010000000000000515BI0100001148 | 4 | nos |
| 38 | 38 | 18.15.1\nProviding and fixing brass bib cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001149 | 2 | each |
| 39 | 39 | 18.16.1\nProviding and fixing brass stop cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001150 | 2 | each |
| 40 | 40 | 17.32.2\nProviding and fixing mirror of superior glass ( of approved quality) and of required shape and size with\nplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular\nshape 453x357 mm | BI01010001010000000000000515BI0100001151 | 2 | each |
| 41 | 41 | 18.65\nProviding and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm\nwith concealed fittings arrangements, weighing not less than 106 gms. | BI01010001010000000000000515BI0100001152 | 2 | each |
| 42 | 42 | 17.11.2\nProviding and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber\nplug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete,\nincluding painting of fittings and brackets, cutting and making good the wall wherever required:Size\n600x450x200 mm | BI01010001010000000000000515BI0100001153 | 2 | each |
| 43 | 43 | 50.18.7.2.2\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as\nper direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001154 | 30 | m |
| 44 | 44 | 50.18.7.3.2\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as\nper direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | BI01010001010000000000000515BI0100001155 | 5 | m |
| 45 | 45 | 50.18.7.6.1\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as\nper direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall | BI01010001010000000000000515BI0100001156 | 5 | m |
| 46 | 46 | 50.18.9.9.1\nProviding and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,\nrefilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001157 | 7 | m |
| 47 | 47 | 50.18.9.22.1\nProviding and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC\nsolvent cement - 110 mm dia Elbow | BI01010001010000000000000515BI0100001158 | 2 | nos |
| 48 | 48 | 50.18.9.22.4\nProviding and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC\nsolvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001159 | 2 | nos |
| 49 | 49 | 50.17.1.5\nSupplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of\nmaterials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001160 | 2 | nos |
| 50 | 50 | Providing and fixing 150mm silt with CP gratings | BI01010001010000000000000515BI0100001161 | 4 | each |
| 51 | 51 | ELECTRICAL WORKS | BI01010001010000000000000515BI0100001162 | | |
| 52 | 52 | 1.10.3\nWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated\ncopper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch,\nmodular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper\nconductor single core cable etc as required.Group C | BI01010001010000000000000515BI0100001163 | 26 | point |
| 53 | 53 | 1.12\nWiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single corecable in\nsurface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulatedcopper\nconductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001164 | 100 | m |
| 54 | 54 | 2.3.2\nSupplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,\non surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,\ninterconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8\nway, Double door | BI01010001010000000000000515BI0100001165 | 1 | each |
| 55 | 55 | 90.11.1.21\nSupply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of\nMCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/\nisolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall ,\nmaking good the damages, colour washing etc. as required12 way (8+12) - double cover TPN vertical DB\nwith provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) | BI01010001010000000000000515BI0100001166 | 1 | each |
| 56 | 56 | 1.24.3\nSupplying and fixing following modular switch/ socket on the existing modular plate & switch box\nincluding connections but excluding modular plate etc. as required.15/16 amp switch | BI01010001010000000000000515BI0100001167 | 3 | each |
| 57 | 57 | 1.24.5\nSupplying and fixing following modular switch/ socket on the existing modular plate & switch box\nincluding connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | BI01010001010000000000000515BI0100001168 | 3 | each |
| 58 | 58 | 1.14.2\nWiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated\ncopper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5\nsq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001169 | 75 | m |
| 59 | 59 | 5.4\nEarthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding\nmasonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.\nwith charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001170 | 1 | set |
| 60 | 60 | 5.19\nProviding and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing\nsurface/ recessed conduit/ submain wiring/ cable as required. | BI01010001010000000000000515BI0100001171 | 20 | m |
| 61 | 61 | 1.25\nSupplying and fixing two module stepped type electronic fan regulator on the existing modular plate\nswitch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001172 | 6 | each |
| 62 | 62 | 1.26\nSupplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular\nplate as required. | BI01010001010000000000000515BI0100001173 | 3 | each |
| 63 | 63 | 1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated\ncopper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6\nSq.mm + 1 x 6 sq.mm earth wire | BI01010001010000000000000515BI0100001174 | 50 | m |
| 64 | 64 | 1.14.6\nWiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated\ncopper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 16\nsq. mm + 1 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001175 | 25 | m |
| 65 | 65 | 2.12.2\nSupplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete\nwith connections, testing and commissioning etc. as required.63 amps | BI01010001010000000000000515BI0100001176 | 3 | each |
| 66 | 66 | 2.14.3\nSupplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent\ncircuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB\ncomplete with connections, testing and commissioning etc. as required.63 amps | BI01010001010000000000000515BI0100001177 | 1 | each |
| 67 | 67 | Supplying and fixing 6 A to 32 A ratings, SP MCB, and other accessories | BI01010001010000000000000515BI0100001178 | 8 | each |
| 68 | 68 | 1.27.2\nSupplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular\nswitches in recess etc as required.3 Module (100mmX75mm) | BI01010001010000000000000515BI0100001179 | 3 | each |
| 69 | 69 | 1.28.2\nSupplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as\nrequired.3 Module | BI01010001010000000000000515BI0100001180 | 3 | each |
| 70 | 70 | Supplying, installation, testing and commissioning of 2 tonne invertor split AC with 5KVA voltage\nstabiliser and other accessories( blue star or voltas) | BI01010001010000000000000515BI0100001181 | 3 | each |
| 71 | 71 | Supplying and fixing GI stand for supporting compressor unit of split AC | BI01010001010000000000000515BI0100001182 | 3 | each |
| 72 | 72 | Providing additional copper piping for erection of AC unit | BI01010001010000000000000515BI0100001183 | 9 | m |
| 73 | 73 | Supplying and fixing 48\" Ceiling fan and other accessories | BI01010001010000000000000515BI0100001184 | 5 | each |
| 74 | 74 | Supplying and fixing angle batten with 23 watts CFL and other acessories | BI01010001010000000000000515BI0100001185 | 2 | each |
| 75 | 75 | Supplying and fixing 1 feet x 1 feet sq. type double pin type LED (24 Watts) mirror optics and all other\naccessories etc., complete | BI01010001010000000000000515BI0100001186 | 6 | each |
| 76 | 76 | Supplying and fixing 6'' dia punch light with LED bulb and other accessories | BI01010001010000000000000515BI0100001187 | 6 | each |
| 77 | 77 | Supplying and fixing 12 \" Exhaust fan and other accessories | BI01010001010000000000000515BI0100001188 | 2 | each |
