Tender For total knee replacement (as per specification)ITEM LIST :- (1) Specifications for Total Knee REPLACEMENT SYSTEMS 16058 are as mentioned below - 1.TheKnee System should be US FDA approved from firm with long term market standing and have more t-Maharashtra

Tender For total knee replacement (as per specification)ITEM LIST :- (1) Specifications for Total Knee REPLACEMENT SYSTEMS 16058 are as mentioned below - 1.TheKnee System should be US FDA approved from firm with long term market standing and have more than 20years of clinical success. 2.The set should consist of one patella, one femoral component, tibial tray, tibial insertand fast setting cement - CMW1 smart set. 3.The firm should provide all set of implant and instrumentation alongwith technical assistance at the time of surgery. 4.Primary component should accommodate extension rod onboth tibial and femoral side if desired in complex primary cases or the firm should provide the revision systemwith rod if desired in cases. 5.Femoral jig should have the option of posterior referencing and anterior referencing.6.Tibial jig should have options of providing 0 degree, 3 degree and 5 degree slope. 7.Femoral components shouldbe aavailable in PS and CR options which can accommodate > 150 degrees of flexion (HIGH FLEXION).8.Femur should have a gradually reducing radius / multi radius to provide a smooth transition from stabilitytorotational freedom through the patients range of motion. 9.Femoral contact with the insert should be designedsuch that there is a smooth engagement forgradual femoral rollback and stability in flexion which reducing stressto the tibial spine. 10.Femoral component should have the ability to shift more than 1.5 mm anterior or posterior.11.CR femur should have a brake radius concept to increase the radius which controls the anterior slide.12.Femur should have at least anatomic 14 different sizes. 13.The Tibial Base should have a central lockingdesign that provides the architecture for the system. 14.The same tibial tray can be used for the standard, highflexion and constrained type of femur. 15.The tibial insert should made of Anti-oxidant polyethylene. 16.Shouldhave small 1 mm increments in the thinner range of tibial insert thickness allow

Refer document

Refer document

Refer document