}

Construction Of Pancchyatghar Building At Beer, BEER-Himachal Pradesh

Rural Development And Panchayats Department has published Construction Of Pancchyatghar Building At Beer. Submission Date for this Tender is 07-08-2019. Building Work Tenders in BEER Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

21151916
Construction Of Pancchyatghar Building At Beer
Open Tender
Indian
Himachal Pradesh
BEER
07-08-2019

Tender Details

Construction Of Pancchyatghar Building At Beer

Key Value

Document Fees
INR 1500 /-
EMD
INR 53522.0 /-
Tender Value
INR 30.68 Lakhs /-

BOQ Items

Sl. No. Item Description Item Code / Make Quantity Units
1 1 Cutting in Earth work in all kind of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil, de-watering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 225 cum
2 2 Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 137.6 cum
3 3 Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge in
4 3.01 Foundation ,footing basis of columns etc. And mass concrete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 127.55 sqm
5 3.02 Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness all as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. . 108.4 sqm
6 3.03 Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels any depth in all heights from floor as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 102.54 sqm
7 3.04 Columns, pillars ,posts and struts square, rectangular or polygonal in plan as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. . 79.19 sqm
8 3.05 Columns, pillars, posts and struts circular or curved in plan as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. . 24.11 sqm
9 3.06 Stair case with sloping or stepped soffits excluding landing as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 9.35 sqm
10 3.07 Edges of slab and breaks in floor and walls under 20cm wide as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 76.26 mtr
11 4 Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. 4.37 cum
12 5 Providing and laying, mechanically mixed and vibrated cement concrete 1:5:10 (one cement:five sand ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. 12.93 cum
13 6 Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 (one cement:Six sand Twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. 9.63 cum
14 7 Providing and laying, mechanically mixed and vibrated cement concrete 1:8:16 (one cement:Eight sand Sixteen graded crushed stone aggregate 20 mm (Twenty millimeter) nominal size) and curing complete on slab and floor excluding the cost of form work but including all leads and lifts of materials in screed laid under flooring and as per direction of Engineer -in -charge. 5.26 cum
15 8 Providing and laying cement concrete 1:1.5:3 (one cement : one & half sand : three graded crushed stone aggregate 20mm nominal size) mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge in :-
16 8.01 Foundation ,footing basis of columns etc and mass concrete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 30.65 cum
17 8.02 Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 25.18 cum
18 8.03 Staircases (except spiral stair case) excluding landing but including preparing of top surface and finishing of nosing for all floor complete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 1.38 cum
19 8.04 Column, pillars, posts and structs square, rectangular ,polygonal, circular or curved in plan as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.. 11.52 cum
20 9 Providing and laying mechanically mixed and Vibrated cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20 mm nominal size for reinforced concrete chhajas not exceeding 10cm thickness up to all floor level including finishing the exposed surface with cement mortar 1:3(one cement:three sand )to give a smooth and even surface ,form work and curing complete excluding the cost of reinforcement as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 0.95 cum
21 10 Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending ,binding and placing in position and cost of binding wire as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 8873.25 kg
22 11 Random rubble masonry uncoursed but brought to course with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 one cement:six sand including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.with in all leads lifts and other incidentals. 22.01 cum
23 12 Boulder filling under floors including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. . 14.46 cum
24 13 Brick work using second Class common burnt clay building bricks, in cement mortar 1:6(one cement :six sand ) in super structure up to all floor levels including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 39.3 cum
25 14 Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand )in super structure up to all floor levels including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 44.44 sqm
26 15 Providing wood work in frames of doors ,windows ,clerestory, windows and other frames wrought ,framed and fixed in position of second class deodar wood including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 2.41 cum
27 16 Providing 40 X 3 mm (forty into three millimeters ) flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30X10X15cm (thirty into ten into fifteen centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size), as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 102 Each
28 17 Providing and fixing 40 mm (forty millimeter) thick flush door shutters including black enameled iron butt hinges with necessary screws of interior grade comercial type core of blackboard construction with frame of first class hardwood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 22.78 sqm
29 18 Glazing with glass pan 5.5 mm (five point five millimeters)thick plain glass panes with deodar wood beading as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 40.78 sqm
30 19 Providing and fixing 40 mm (forty millimeters )thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enameled iron butt hinges with necessary screws of second class deodar wood including carriage of material with in all leads , lifts and other incidentals . 12.43 sqm
31 20 Providing and fixing 40 mm (forty millimeters) thick wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 (Eighty five ) G. With wire of dia 0.56mm (zero point five six milometers )for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screw of second class deodar wood including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 23.77 sqm
32 21 Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc completes as per direction of engineer -in- charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
33 21.01 250 x 16 mm (Two hundred five into sixteen millimeters) 6 each
34 21.02 300 x 16 mm three hundred into sixteen millimeter 3 each
35 22 Providing and fixing aluminium tower bolts (barrel type) anodized and transparent or dyed to required colour and shade with the screws etc complete as per direction of the engineer in charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
36 22.01 200 mm X 10 mm (Two hundred millimeters Into ten millimeters) 36 each
37 22.02 100 mm X 10 mm (One hundred fiftymillimeters Into ten millimeter) 92 each
38 23 Providing and fixing aluminium handels anodized or dyed to required colour and shade with the necessary screws etc. complete as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
39 23.01 100 mm (hundred millimeters size) 46 each
40 23.02 125 mm (One hundred twenty five millimeters size ) 24 each
41 24 Providing and fixing 200 mm (Two Hundred millimeters) Bright Finished hard drawn hooks eyes including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 23 each
42 25 Providing and fixing 100 mm bright finished brass floor Door stopers with rubber cushion screws etc to suit shutter thickness complete including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 18 each
43 26 Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 611.7 kg
44 27 Providing and fixing in position collapsible steel shutter with vertical channel 20 mm x10 mmx2 mm and braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T iron 40 mmx 40mmx 6mm with 38 mm dia steel pulley complete with bolts ans nuts locking arrangement stoppers handles including applying coat of red lead paint including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 9.39 sqm
45 28 Providing and fixing 10 mm ( ten mm) thick water proof stain and impact resistent heavy duty (double charge) vetrified tiles nitco or equivalent 600x600x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm ( twelve milimeters) thick cement mortar 1:3 ( one cement : three sand) and jointed with cement slurry including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 179.35 sqm
46 29 Providing and laying spartic cermic tiles 5.5 mm (five point five millimeter )thick of khajaria,nitco or jonson make in flooring (300 x 300 mm size) treads of steps laid on bed of 12 mm thick cement mortar 1: 3 ( one cement : three sand) finished with flush pointing in white cement including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 9.29 sqm
47 30 Providing and fixing Galzed tiles of size 450 x 300 mm x 6 mm (four hundred fifty x three hundred x six millimeter) thick in skirting risers of steps and dado on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage of material with in all leads lifts in all floors. The sample and pattern of tiles should be got approved before fixingas required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 23.9 sqm
48 31 Providing and laying Kota stone slab flooring in 20 mm (twenty millimeter average) thick base of cement mortar 1:4 (one cement : four sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (25 mm thick) as per design and pattern approved as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 26.3 sqm
49 32 Providing and laying Kota stone slab 25 mm (twenty five average) thick in risers of steps, skirting dado and pillars laid on 12 mm (twelve milimeter average) thick cement mortar 1:3 (one cement :three sand ) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete as per pattern approved as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 8.28 sqm
50 33 Providing and laying 40 mm thick cement concrete flooring in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20 mm nominal size) curing complete including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 7.2 sqm
51 34 Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and pre polished machine cut for kitcken platform ,vanity counters ,window sills facias and similar locations of requird size, approved shade colour nd texture laid over 20mm thick base cement mortar 1:4 (one cement :four sand )joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing curing moulding and polishing to edges to give high gloss finish as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 2.35 Sqm
52 35 Extra for providing opening of required shade and shape for washbasin /kitchen sink in kitchen platform vanity counters and similar locations in granite stone including necessary holes for pillar taps etc including moulding and rubbing and polishing of cur edges as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
53 36 Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In : Grating framed guard bars ladders railling brackets and similar works including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
54 36.01 Trusses and trussed purlins in building as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 50.47 Qwt.
55 36.02 Grating framed guard bars ladders railing brakets and similar works as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 21.46 Qwt.
56 37 Providing and fixing 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 168.26 sqm
57 38 Providing and fixing ridges or hips 60 cm ( sixtycentimeters) overall with 0.60 mm (zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 39 Mtr.
58 39 Providing and fixing VALLEY 60 cm over all with 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 8 Mtr.
59 40 Providing and fixing M.S. BP sheet 1.66 mm to 2 mm thick in eaves board / facia / soffit / ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 81.7 Sqm
60 41 Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (one cement : two sand : four stone aggregated 20 mm nominal size )and cost of cutting holes and making good the walls etc.100 mm diameter for C.I pipes including carriage of materialas required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 6 Each
61 42 Providing and fixing on wall face PVC (D-plast) rain water pipes of workng pressure not less than 4.50 kg/sqm including filling the joints with approved adhesive complete 100 mm dia pipes including carriage of materialas as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. 7.3 Mtr.
62 43 Providing and fixing on wall face PVC (D-plast)accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
63 43.01 PVC plain bend 100 mm diameter 2 Each
64 43.02 PVC plain shoes 100 mm diameter 2 Each
65 44 Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead , red oxide/zinc oxide crome including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 40.78 SQM
66 45 Painting two coats (excluding priming coat )on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including entire carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 224.67 SQM
67 46 Applying priming coat on new wood and wood based surfaces with readymix paint brushing wood pink primer after and including preparing the surface thoroughly cleaning oil grease, dirt, other foreign matter sand papering and knotting etc. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 190.32 SQM
68 47 Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 190.32 SQM
69 48 6 mm (six millimeter) thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 106.65 SQM
70 49 15 mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement : six sand ) as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 622.3 SQM
71 50 Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 445.52 SQM
72 51 Distempering (two coats )with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 445.52 SQM
73 52 Applying one coat of acrylic primer (spectrum or equivalent of superior quality on new concrete /masonry / plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 255.96 SQM
74 53 Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 255.96 SQM
75 54 Providing under layer for plinth protection of 75 mm (seventy five millimeters ) thick (unconsolidated ) bed of dry brick /stone broken/crushed aggregate 40mm (forty millimeters ) nominal size well rammed & consolidated & grouted with fine sand including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 25.6 SQM
76 55 Providing plinth protection 50 mm (Fifty Millimeters )thick in cement concrete 1:3:6 (one cement :three sand :six graded/ crushed stone aggregate 20 mm nominal size including finishing the top surface of concrete smooth finfish including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 25.6 SQM
77 56 Brick edging (brick laid on edge) to plinth protection with bricks including grouting with cement mortar 1: 4 (one cement : four sand) with brick size 22.90 x 11.2 x 7 cm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 45.06 MTR
78 57 Constructing course rubble hammer dressed U shape open surface drain with side wall 15x22cm in cement mortar 1:6 (one cement:six sand )and inside plastering with cement mortar 1:3(one cement:three sand)icluding earth work and laying 10cm cement concrete in 1:5:10(one cement:five sand:ten graded stone aggregate 40mm nomonal size and 7.5 cm cement concrete 1:2:4(one cement:two sand :four graded stone aggregate 20mm nominal size and finished with a floatingcoat of neat cement including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 45.06 MTR
79 58 Providing and fixing false ceiling made out of armstrong mineral fiber ceiling tiles of size 600 x 6000 15 mm of type RH-99 laid in grid system with black grooves at bottom including the cost of frame work comprising of GI-120 GSM coating with minimum 0.3 mm thickness main runner spaced at 1200 mm centre to centre securely fixed the structural soffits by approved hangers fixed at 1200 mm maximum distance including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 85.88 Sqm
80 59 Providing and fixing vitreous china wash down water closet with integral P or S trap including jointing the trap with soil pipe in cement mortor 1:1 (one cement : one sand) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
81 59.01 Anglo indian universal closet 1 EACH
82 60 Providing and fixing 10.00/12.50/15.00 liters vitreous china low level flushing cisterns of Cera ,Hindware or equvalent with a pair of cast iron or mild steel brackets complete with fitting such as lead valve less syphon, 15mm (fifteen millimeters) nominal size brass ball valve with polythene float, chromium plates brass handles unions and couplings for connections with inlet, outlet and over flow pipe 40mm (forty millimeters) die chromium plates flush bend including cutting holes in walls and making good the same and connecting the flush bend with cisterns and closet (over flow) pipe tube measured and paid for separately including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
83 61 Providing and fixing in position brass mosquito proof couplings for over flow pipe of 25mm ( twenty five millimeters) nominal dia (over flow pipe tube measured and paid for separately) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
84 62 Providing and fixing white plastic sheet (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
85 63 Providing and fixing galvanished iron inlet connection for flush pipe with water closet pan including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
86 64 Providing and fixing vitreous china wash basin of Cera, Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials upto all leads and lifts in all floors
87 64.01 Flat back 550 x 400 mm (Five hundred fifty millimeters into four hundred millimeters) 1 EACH
88 65 Providing and fixing vitreous china pedestal for washbasin of Cera ,Hindware or equvalent complete recessed at the back for reception of pipe and fitting including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 EACH
89 66 Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. wase with C.I. of M.S. Brackets painted white including cutting holes and making same with fitting, size 610 X 510 mm with bowl depth 200 mm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 EACH
90 67 Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.. 2 EACH
91 68 Providing and fixing 32 mm dia (thirty two millimeters ) M.I. union for wash basin or sink complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
92 69 Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass S trap for wash basin and sink including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
93 70 Providing and fixing 100 mm dia (one hundred millimeters ) sand cast iron grating of Ess-Ess, Jaguar or equvalent for gully floor or Nahni trap including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
94 71 Providing and fixing CP brass bib tap (superior or heavy quality of Ess-Ess ,Jaguar or equvalent make) 15 mm (fifteen millimeters) dia with capstan head i/c CP concealing flange complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
95 72 Providing and fixing 15 mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads i/c CP concealing flange of Ess-Ess ,Jaguar or equvalent make complete in all respects including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 EACH
96 73 Providing and fixing CP brass angle valve 15 mm without nuts and pipe i/c CP concealing flange of Ess-ess, Jaguar or equvalent make including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 each
97 74 Providing and fixing CP brass bib tap (superior or heavy type) of Ess-Ess ,Jaguar or equvalent make) 15mm (fifteen millimeters) dia with long body i/c CP concealing flange including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 each
98 75 Providing & Fixing Mixer for Kitchen sink i/c CP concealing flange of Ess-ess, Jaguar or equvalent make with casted swing spout at top including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
99 76 Providing and fixing CP stop cock of Ess-ess ,Jaguar or equvalent make i/c CP concealing flange including carriage of material with in all leads and lifts 15 mm (fifteen millimeters) nominal bore including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 each
100 77 Providing and fixing 600 mm x 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
101 78 Providing and fixing CP brass towel rail of Ess-Ess ,Jaguar or equvalent makecomplete with CP brass brackets fixed to wooden plugs with CP Brass 600mmx20mm (six hundred into twenty millimeters) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
102 79 Providing and fixing 600 mm x 20 mm (six hundred into twenty millimeters) glass self with CP brass brackets and guard rail complete fixed to wooden plug with CP brass screws including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
103 80 Providing and fixing toilet papers holders chromium plated brass complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
104 81 Providing and fixing PTMT Zet sprayer with 1.00 mtr tubeincluding carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
105 82 Providing and fixing PVC connection with brass union 300/450 mm length including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
106 82.01 15 mm (fifteen millimeters) size. 1 each
107 83 Providing and fixing PTMT soap dish with holder of approved quality and colour with steel screw and rawal plug including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 each
108 84 Providing and fixing brass Full way valve with wheel including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
109 84.01 15 mm (fifteen millimeters) nominal bore 2 each
110 84.02 20 mm(twenty millimeters) nominal bore 2 each
111 85 Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
112 85.01 15 mm (fifteen millimeters) nominal bore 75 mtr
113 85.02 20 mm (twenty millimeters) nominal bore 25 mtr
114 86 Providing and laying 20 mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube of TATA Or Jindel or Equvalent (medium grade) tube fitting earth work in trenches tube measured and paid for separately including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 25 mtr
115 87 Providing and fixing G.I/M.I union of following nominal size including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
116 87.01 15 mm (fifteen millimeters) size. 5 EACH
117 87.02 25 mm (twenty Five millimeters) size 5 EACH
118 88 Making connection of gal vanished steel distribution branch with gal vanished mild steel main 20mm to 40mm (twenty millimeters to forty millimeters) nominal bore by providing and fixing tee including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 EACH
119 89 Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank) including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 1 EACH
120 90 Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110 mmX 75 mm including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 3 EACH
121 91 Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes of D-plast make ISI marked including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
122 91.01 75 mm nominal size (seventy five millimeters) size 25 MTR
123 91.02 110 mm nominal size(one hundred ten millimeters) size 25 MTR
124 92 Providing and fixing PVC single equal branch with ovel access door of D-plast make , ISI marked insertion rubber washer 3 MM thick bolts and nuts including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
125 92.01 110 mm (one hundred ten millimeter Dia ) 2 EACH
126 92.02 75 mm (Seventy five millimeters Dia ) 2 EACH
127 93 Providing and fixing PVC door band with oval access door insertion rubber washer 3 MM thick bolts and nuts of D-plast make ISI marked complete including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
128 93.01 110 mm (one hundred ten millimeter Dia ) 2 EACH
129 93.02 75 mm (Seventy five millimeters Dia ) 2 EACH
130 94 Providing and fixing PVC collars of D-plast make ISI marked including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
131 94.01 75 mm (Seventy five millimeters Dia ) 5 EACH
132 94.02 110 mm (one hundred ten millimeter Dia ) 5 EACH
133 95 Providing and fixing PVC Plain bend of D-plast make ISI marked including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
134 95.01 75 MM (Seventy five millimeters Dia ) 2 EACH
135 95.02 110 MM (one hundred ten millimeter Dia ) 2 EACH
136 96 Constructing brick masonary chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I cover with frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plaster 15mm thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. and curing complete. including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
137 96.01 Inside dimensions 455 mm x 610 mm x 450 mm deep for single pipe line 2 EACH
138 96.02 Inside dimensions 600 mm x 850 mm x 450 mm deep for pipe line with three or more inlets 1 EACH
139 97 Providing and laying brick bats 50 mm size including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 7.09 CUM
140 98 Providing and laying C.I manhole cover 455 x 610 mm cm dia including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 2 EACH
141 99 Providing and laying 20 mm cast iron rings with chequred or ribited non soli surface including and fixing in main holes with 200 x 200 x 200 mm cement concrete 1:3:6 stone of 20mm nominal size including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. 20 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail