Chemical Oil and Gas, Chemical Industry, Chemical Supply, Machinery and Tools, Hardware and Fasteners, Connectors Supply, Clamps, Tools and General Machinery, Cutting Crimping and Punching Tools, Construction, Fabrication and Casting, Fabrication Work, Sc-Maharashtra

Tender For Mechanical Works Of Design, Manufacture, Fabrication And Supply Of Forming Dies, Hole Punches, Special C-Clamps, Holding Jigs & Fixtures, Laser Cut Plaque Blanks, Fabrication Of Pressure Testing Chambers For Inactive & Active Qualification Testing Of Plaques And Installation Of The Same At Barc, Trombay, Mumbai As Per Technical Specification-- 1 Male And Female Forming Dies Made From Wps Die Material For Sealing Caps Required For Plaques. *(Ref. Drawing For Detail) 2 Stainless Steel Special C-Clamps With Flat Ends For Holding Flat Blank Discs. (Size: 3 – 4 Inch). *(Ref. Sketch For Detail) 3 Stainless Steel Special C-Clamps With Radius Ends For Holding Formed Plaques. (Size: 3 – 4 Inch). *(Ref. Sketch For Detail) 4 M.S/ Wps Material Hole Punch Sets Containing (12 Nos.) Of Hardened Punches Each Having Various Standard Hole Dia. For Cutting Brazing Discs From Foil Raw Material. *(Ref. Sketch For Detail) 5 Holding Jig (Rotating Type) With Fixture, Magnifying Lens And Adjustable Spot Light For Flat Piece. (Stainless Steel Base Size: 200 Mm X 200 Mm X 6 Mm Thk.) *(Ref. Sketch For Detail) 6 Holding Jig (Rotating Type) With Fixture, Magnifying Lens And Adjustable Spot Light For Formed Piece.*(Ref. Sketch For Detail) 7 Laser Cut Blanks (0.9 Mm Thk) 15.8 Mm Dia. O.D With 13.0 Mm Dia. I.D & 0.25 Mm Deep Round Cavity And Two Suture Lugs For Plaques. *(Ref. Drawing For Detail) 8 Laser Cut Sealing Cap Blanks (0.1 Mm Thk) And 15.8 Mm Dia. For Plaques. *(Ref. Drawing For Detail) 9 Laser Cut Cadmium Free Brazing Alloy Blank (0.1 Mm Thk) And 16 Mm O.D And 13.5 Mm I.D For Plaques. *(Ref. Drawing For Detail) 10 Complete Hydrotest Pressure Testing Setup With Pressure Holding Chamber Suitable For Min. 70 Kg/Cm2 With Two Pressure Gauges Each And Associated Manual Pumps, Valves, Flexible Stainless Steel Hoses And Connectors, Etc.*(Ref. Sketch For Detail) 11 A Set Of Carbon Steel Drop Test Weight (Min. Weight: 200G), Drop Test Anvil (Min. Weight: 2 Kg)

Refer document

Refer document

Refer document