Tender For Obtained The Rates For Fabrication Works Shall Be Carried Out In Mangalore Pol Terminal.- Welding Of Pipe As Per Latest Codes And Standards, Layout Drawings And Attachments , Cutting Of Pipe As Per Requirements Of Layout Diagram And Instructions Of Engineering In-Charge, Structural Steel Consisting Of Steel Plates, Rolled Steel Joists, Channels, Angles, Tubes, Pipes, Rectangular/Square Hollow Steel Sections, Chequered Plates Etc. In Columns, Rafters, Joists, Trusses, Gratings Of Approved Design, Swing Platforms Of Approved Design, Insert Plates In Rcc/Brickwork, Anchor Bolts For Steel Structure, Sleeve Pipes, Anchor Nuts, Washers, Foundation Bolts Etc, Conforming To Is:2062/Other Relevant/Applicable Codes. The Job Includes Straightening Of Raw Steel If Required, Fabrication Of Steel Structures As Per Drawings/Pattern (Including Preparation Of Fabrication Drawing And Detailed Bill Of Materials), Supply Of Bolts, Nuts, Washers, Shims, Packs, Putty, Gas, Welding Electrodes And All Other Consumables, As Required, Cleaning And Preparation Of All Steel Surfaces, Painting Etc. Complete. Painting Shall Be One Coat Primer Of 65 Micron Inorganic Zinc Silicate Followed By Two Coats Of Acrylic Polyurethane Each Of 40 Microns. Finishing Coat Shall Be Applied One Coat Before Erection And One Coat After Erection. Total Thickness Of Paint Shall Be Minimum 145 Microns Dft. The Scope Includes Loading, Transportation, Unloading And Delivery At Erection Site Of All Fabricated Structures, Erection, Alignment And Welding Of All Structures True To Line, Level, Plumb And Dimension, Including Rectification If Any, Splicing, Site Assembly All As Per Technical Specifications And Drawings, Touch Up Painting, Including Supply Of Paint, Where Paint Is Damaged. Etc