Chemical Oil and Gas, Chemical Industry, Chemical Supply, Paints and Primers, Paint Supply, Distribution and Conditioning, Air Circulation, Industrial Fan, Scientific Instrument, Indicating and Recording Instruments, Counters, Safety and Security Equipmen, MEMS IITB-Maharashtra

Supply Of Laboratory Fume Hood :- Specifications For Fume Hood. 1.Size: 1.5M ( L ) X 0.9M ( D ) X 2.4M ( H ) 2.Inner Dimensions: 1.5M ( L ) X 0.9M ( D ) X 1.6 M ( H ) 3.Material Of Construction: Any Of The Following Material – ( 1 ) Galvanised Iron ( Gi ) Min 1 Mm As Per Is 277 Standard. Or ( 2 ) Crca Min 1 Mm And As Per Is 277 Standard. Epoxy Painting Or Automated Powder Coating. 4.Construction Of Interior: Corrosion, Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels. Automated Powder Coating. 5.Baffle Arrangement: A Stable, Non-Adjustable 2 Or 3 Point Suction Systems. 6.Design Structure: Floor Mounted. 7.Work Top: Granite Work Top Of At Least 17 Mm Thick, Chemical Resistant, Splash And Spillage Proof. 8.Sash ( Shutter ) : Transparent Safety Glass, Smooth Operation. Horizontal And Vertical Sliding, Toughened Glass Of ~ 6 Mm Thick With Counter Balance System. 9.Lighting: Fluorescent Or Led Lights, 2 Nos. 10.Electrical Utilities: 6 Nos. Electrical Sockets 5-6 / 15-16 A Rating. Reputed Make Single Phase 50Hz. 11.Chemical Storage Base Cabinet: Corrosion Resistant, Chemical And Heat Resistant Internal Walls, Fire Retardant, Smooth Finish, Easily Cleanable Panels. Automated Powder Coating. 12. Level Adjusting Screws: To Adjust The Fume Hood Level By +Or - 10 Mm. 13.Exhaust Port: Two Point Exhaust System. Fumes To Be Exhausted Without Turbulence At The Exhaust Port. Ensure Low Noise Level. 14.Design: En14175 Or Ashrae-110: 2016 ( Latest Edition ) Certified. 15.Sink: Sink ( 5-10 Cm W X 10-20 Cm L ) , Water Tap Arrangement, And Chemical / Acid Resistant Material. Centrifugal Blower: 1No. It Should Satisfy Safe Velocity Norms. 1.Air Suction Capacity: As Per Safe Fume Hood Airflow Pattern. 2.Motor: Reputed Make, With Isi Mark, 1-2 Hp. 3.Duct Diameter: 8-10 Inches. Stainless Steel Duct Collar. Duct Joints Shall Be Of Flanged Connections With Rubber Gasket In Between. 4.Drive: Direct Drive. Installation: 1.Fumehood: Location – Ground Floor Lab. All Plumbing Inside The Fumeh

Refer document

INR 8000.0 /-

Refer document