Safety and Security Equipment, Fire Prevention Equipments, Fire Resistant Coatings, Mineral Textile Rubber and Lather, Resins and Rosins, Foams, Chemical Oil and Gas, Paints and Primers, Paint Supply, Electrical Industry, Electric Panel, PUF Panel, WEST CAMP MFFR-Punjab

Supply Of Store Shelter :- 1. Pre Fab Structure With Pre Puf Panel Board ( A ) Manufacture And Supply Of Prefabricated Store Shelter For Erection Made Of Polyurethane Foam ( Puf ) Wall Panels Of 0.60Mm Thick With Both Inner And Outer Sheet Of The Panel Made Of Gi Metal Plain Sheet Of 0.63Mm Thick .Inner Plain Sheet With Slight Ribs. Inner And Outer Sheets To Be Of 240 Mpa Gi With 180 Gsm Zn Coating / 300 Mpa Galvalume Steel With 150 Gsm Alu-Zn Coating Of Size 19.53M X 6.10M With 1.5M Wide Verandah ( Out To Out Of Rhs Columns ) And 3.0 M Clear Headroom. Plan And Elevation Of The Shelter Is As Per Drawing Attached. Size And Basic Detail As Per Costed Schedule Of Works. All Other Specification Shall Be As Per Technical Specification And Drawings Attached With Following Stores :. ( B ) Polyurethane Foam ( Puf ) Wall Panels Of 60Mm Thick ( Make : Lloyd / Bnal Pre Fab / Modern Pre Fab / Me Techno ) With Both Inner And Outer Sheet Of The Panel Made Of Gi Metal Plain Sheet Of 0.63Mm Thick . Inner Plain Sheet With Slight Ribs. Inner And Outer Sheets To Be Of 240 Mpa Gi With 180 Gsm Zn Coating / 300 Mpa Galvalume Steel With 150 Gsm Alu-Zn Coating With Interlocking Arrangment With Following Specification :- ( I ) Outer Sheet Profile : Profiled Gi Metal Plain Sheet ( Ii ) Inner Sheet Profile : Gi Metal Plain Sheet With Slight Ribs. ( Iii ) Panel Thickness : Minimum 60Mm. ( Iv ) Facing Material Thickness Of Not Less Than 0.63Mm Outer And Inner With Dft 20 Microns Colourcoate Mp / Smp / Pvdf Coating Over 5 Icron Primer ( V ) Polyurethane Foam ( Puf ) Cfc & Hcfc Free Rigid Puf As Per Is 12436 Standard ( Vi ) Foam Overall Density : 40 + 2Kg / Cu.M ( Vii ) Foam Thermal Conductivity ( K-Value ) At 10 Degree Centigrade Mean Temp. : 0.023 W / M Degree K ( Viii ) Compressive Strength @ 10% Deformation : 2.10 Kg / Sq.Cm. 205.93 Kpa ( Ix ) Tensile Strength : 2.5 Kg / Sq.Cm ( X ) Flexural / Bending Strength : 90-95% ( Xi ) Fire Characterstic : Fire Retardant, Self Extinguishing And Quality Foam.

Refer document

INR 28500.0 /-

Refer document