Machinery and Tools, Hardware and Fasteners, Bolts, Clamps, Miscellaneous Fasteners, Retaining Hardware, Nuts Supply, Screws, Washers, Springs, Gaskets and Seals, Gaskets, Tools and General Machinery, Spare Part, Electrical Industry, Light and Bulbs, Tube, TPC Proc, R.No 501, D-II, Wing, Sena Bhawan, New D-Delhi

tender for Rate Contract TATA vehicle Spares(1.51 CLAMP 1.52 SCREW HEX FLANGE HEAD CAP 1.53 SPACER PUMP SUPPORT 1.54 NUT REGULATOR HEXAGON 1.55 WASHER PLAIN 1.56 SEAL O RING 1.57 SCREW HEX FLANGE HEAD CAP M8X1.25X90 1.58 SEAL RECTANGULAR RING 1.59 SEAL O RING(7.2MM) 1.6 GASKET CONNECTION 1.61 ISOLATOR NOISE 1.62 SHIM 0.18MM THICK 1.63 PRESSURE SPRING(Rev Ind switch) 1.64 NUT M 12X1.5 IS-1364(MIG PAD TO ENGINE CROSS MEMBER FRONT) 1.65 SCREW HEX HEAD CAP 1.66 SEAL RING (MICO) 1.67 SPRING WASHER B6 IS 3063 SS 8451 8C 1.68 GASKET FOR FEED PUMP 1.69 HEX NUT 1.7 KEY PLAIN WODDRUFF 1.71 GASKET FLANGE 1.72 RING RETAINING 1.73 BRACKET (ON TIMING 1.74 DOWEL PIN M10X16 1.75 DOWEL RING 1.76 SHIM 1.00MM THICK 1.77 BRUSH GEAR FIXING SCREW 1.78 SEALING RING (MICO) 1.79 SEAL O RING 1.8 DOWEL RING M16X10 1.81 NUT REGULAR HEX 1.82 SCREW HEX FLANGE HEAD CAP 1.83 SCREW HEX FLANGE HEAD CAP 1.84 SCREW FLANGE HEAD CAP 1.85 SCREW HEX FLANGE HEAD CAP M10X1.5X75 1.86 HALLOW SCREW 1.87 JUMP RING 1.88 STUD TO FIX PUMP 1.89 SEAL O RING (SMALL) 1.9 BULB F 115W TS-29201 1.91 INSUL WASHER 1.92 SHIM 1.93 HEX SCREW M6X20 IS 1364 P2 88 SS 8451 1.94 WASHER 1.95 GASKET COVER PLATE 1.96 DELIVERY SPRING VALVE 1.97 SEALING WASHER 16X20 IS - 3175 1.98 SCREW HEX FLANGE HEAD CAP M12X1.75X40 1.99 SCREW HEX FLANGE HEAD CAP M8X1.25X16 2 SCREW ROUND HEAD CAP M5X0.8X17 2.01 WASHING SEALING (1/2) 2.02 SCREW 2.03 SCREW BANJO CONNECTOR 2.04 EARTH TERMINAL NUT 2.05 GASKET OIL DRAIN 2.06 SIM 1.16MM THICK 2.07 SCREW HEX FLANGE HEAD CAP M8X1.25X60 2.08 WASHER SAELING 2.09 BRACKET(ON CYL. BLOCK) 2.1 LINK (FOR SPRING) 2.11 SHIM 0.12MM THICK 2.12 BOLT M8X85 IS-1364 2.13 CONNECTING NIPPLE INNER 2.14 HOSE CLIP SCREW TYPE 2.15 SHIM 0.80 MM THICK 2.16 PLUG EXPANSION 2.17 PINION SPRING 2.18 PLUG EXPANSION 2.19 SCREW 12 POINT M10X1.5X25 2.2 CLOSING RING 2.21 GASKET 2.22 SCREW HEX HEAD CAP M12X1.2532 2.23 WASHER SEALING 2.24 SCREW HEX FLANG

Refer document

INR 3000000.0 /-

Refer document