Aluminium Paneled Door : Providing And Fixing Powder Coated Aluminum Section Of Approved Colour Having Coating Thickness Of Minimum 50 Micron & Minimum Wall Thickness Of Not Less Than 2 Mm, Joints Mitred And Jointed With Heavy Duty Aluminium Pressure Die Cast Cleats With Fins To Match The Outer Frames And Door Frames Conforming Jindal Sections As Specified Fully Paneled With 9 Mm Thick Pre-Laminated 3 Layers Medium Density ( Exterior Grade) Particle Board Grade-1, Type -Ii Conforming To Is:12823 Bonded With Phenolformaldehyde Synthetic Resin Of Approved Brand And Manufacturer Fixed To Shutter With Aluminium Snap Beading And Neoprene / Pvc Gasket / Cp Brass /Stainless Steel Screws Fixed To The Wall With Requisite Rawl Plugs And Screw Or With Fixing Clips Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top , Bottom And Sides With Requisite Pvc/Neoprene Felt/Polysulphide Sealant/Silicon Sealant Including Hard Ware Such As Tower Bolt Of 150 Mm Length From Inside And Aluminum Handle And Aluminum Aldrop Of 200 Mm Length. On Both Sides, 3 Nos. Aluminium Hinges Of 100 Mm Length Etc All Complete As Per Architectural Drawing. Aluminium Door Section Of Jindal Make Or Equivalent Make With The Following Section : Main Frame On All Sides - 4700 (20102) -101.6 X 44.45 X 2.5 Of Weight 1.977 Kg/M Shutter Vertical Frame- 4537 - (19516) 53.7X44.45X2.3 Of Weight 1.238 Kg/M. Shutter Top Frame - 4540 - (19518) 53.7X44.45X2.3 Of Weight 1.173 Kg/M. Shutter Middle Frame - 4621 (20014) - 49.91X44.45X3 Of Weight 1.495 Kg/M Shutter Bottom Frame - 4524 -(19508) 83.5X44.45X3 Of Weight 2.107 Kg/M, Aluminium Cast Door Handle And Clip - 4420 (19360) - 19X17.3X0.9 Of Weight 0.124 Kg/M. In Case Of Non-Availability, Approved Equivalent Make For Al Sections Is Hindalco. Approval Of Engg.-In-Charge Shall Be Taken Before Using Equivalent Sections Matching Next Higher Dimensions And Weight Per Running Metre Without Extra Cost. 75 Al. Windows Openable Square Meters 3195.5 Yes Description => Aluminium Windows (Openable) : Providing And Fixing 50 Micron Powder Coated Aluminium Glazed Windows With 5 Mm Glass & Extruded Built Up Section Of Wall Thickness Not Less Than 1.4 Mm And Approved Make With Glass Panel Fixed To Side -Hung Shutter With Aluminium Snap Beading And Neoprene / Pvc Gasket / Cp Brass /Stainless Steel Screws Fixed To The Wall With Requisite Rawl Plugs And Screw Or With Fixing Clips Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions At Top , Bottom And Sides With Requisite Pvc / Neoprene Felt / Polysulphide Sealant/Silicon Sealant Including Heavy Duty Handle Cum Locking Arrangement Etc All Complete As Per Architectural Drawing And The Direction Of Engg.In-Charge.Aluminium Door Section Of Indal Make Or Equivalent Make With The Following Section : Outer Frame - 2082 -(21095) 34 X 43.5 X 28X 2 Of Weight 0.548 Kg/Mtr Shutter Frame- 4124 - (20913) 34 X 43.5 X 28.5X 1.5 Of Weight 0.494 Kg/Mtr Mullion -(21097) 9139- 57 X 34 X 25X2 Of Weight 0.810 Kg/Mtr Cleat Angle - 20909 - 50 X 50 X 4.7 Of Weight 1.123 Kg/Mtr Glazing Clip : 4125 - 31X 17.5 X 1.2 Of Weight 0.184 Kg/Mtr 76 Al. Sliding Windows 3 Track Square Meters 3160.1 Yes Description => Aluminium Windows (Sliding) : Providing And Fixing 50 Micron Powder Coated Aluminium Glazed Windows With 5 Mm Glass & Extruded Built Up Section Of Wall Thickness Not Less Than 1.4 Mm And Approved Make With Glass Panel Fixed To Side -Hung Shutter With Aluminium Snap Beading And Neoprene / Pvc Gasket / Cp Brass /Stainless Steel Screws Fixed To The Wall With Requisite Rawl Plugs And Screw Or With Fixing Clips Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions At Top , Bottom And Sides With Requisite Pvc / Neoprene Felt / Polysulphide Sealant/Silicon Sealant Including Heavy Duty Handle Cum Locking Arrangement Etc All Complete As Per Architectural Drawing And The Direction Of Engg.In-Charge. Aluminium Sliding Windows Of Jindal Make Shutter Sections: Top & Bottom - 8820 (20736) - 1.5 Mm Thick @ 0.547 Kg/M; Handle Section 8822 (20738) - 1.5 Mm Thick @ 0.547 Kg/M; Shutter Interlock 8821(20737) - 1.45 Mm Thick @ 0.607 Kg/M. Rate Includes Wheels/Bearings, Interlocking Arrangements Etc. Complete. The Track Section Shall Be As Follows: Two Track Window: Top & Side - 8931 (20829) -1.5 Mm Thick @ 0.784 Kg/M; Bottom (Bulb) - 8932 (20830) - 1.5 Mm Thick @ 0.909 Kg/M 77 Al. Sliding Windows 2 Track Square Meters 3109.7 Yes Description => Aluminium Windows(Sliding) : Providing And Fixing 50 Micron Powder Coated Aluminium Glazed Windows With 5 Mm Glass & Extruded Built Up Section Of Wall Thickness Not Less Than 1.4 Mm And Approved Make With Glass Panel Fixed To Side -Hung Shutter With Aluminium Snap Beading And Neoprene / Pvc Gasket / Cp Brass /Stainless Steel Screws Fixed To The Wall With Requisite Rawl Plugs And Screw Or With Fixing Clips Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions At Top , Bottom And Sides With Requisite Pvc / Neoprene Felt / Polysulphide Sealant/Silicon Sealant Including Heavy Duty Handle Cum Locking Arrangement Etc All Complete As Per Architectural Drawing And The Direction Of Engg.In-Charge. Two Track Window: Top & Side - 8933 (20829) -1.5 Mm Thick @ 1.06 Kg/M; Bottom (Bulb) - 8934 (20832) - 1.5 Mm Thick @ 1.248 Kg/M 78 Al. Louvered Ventilator Square Meters 2340.5 Yes Description => Aluminium Louvered Ventilator : Providing And Fixing 15 Micron Colour Anodised/Powder Coated Aluminium Ventilator With Extruded Built Up Section Of Wall Thickness Not Less Than 1.5 Mm And Approved Make Glazed With 5 Mm Thick Opaque Glass Louver 100Mm Wide. 79 Steel Windows Square Meters 2733.6 Yes Description => Steel Windows : Supply, Fabrication And Fixing Of Ms Glazed Windows Using Approved Z Sections With 5Mm Plain Glass Including Providing Grill With 12Mm Square Bar @100Mm C/C , Painting With Two Coats Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint, Handle , Stay Arrangement Etc. Complete(Refer Attached Drawing). 80 Steel Doors Square Meters 2892.6 Yes Description => Steel Doors : Supply, Fabrication And Fixing Of Ms Door Using 35X35x5 Angle Frame And 25X25x3 Angle Members Including Bracings With 16 Gauge Ms Sheet Stitch Welded To Door Shutter Frame Complete As Per Direction Of Engg.-In-Charge Painting With Two Coats Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint, Handle , Stay Arrangement ,Tower Bolt Etc. Complete.(Refer Attached Drawing) 81 Flush Door 900X2100mm: Each 8601.4 Yes Description => Providing And Fixing Solid Core Flush Door In Single Leaf 35Mm Thick Commertial Plywook Of Seasoned Wood Without Ventilator. Door Frame To Be Made Of 60Mm X 100Mm Teak Wood With Wrough Iron Hold Fasts. Door To Be Fitted With Brass Fitting-Hinges, Handles On Both Sides, Tower Bolts, Etc., Complete. Frame To Be Painted In Three Coats Of Synethic Enamel Paint Over A Coat Of Wood Primer Including Scrapping, Surface Preparation Etc., Complete.Door(Leaf) To Be Laminated On Both Sides With Laminations 1.5 Mm Thk And Grey In Color Of Approved Make/Brand.Size 900X2100mm(Refer Attached Drawing) 82 Flush Door - 750X2100mm Each 7349.7 Yes Description => Providing And Fixing Solid Core Flush Door In Single Leaf 35Mm Thick Commertial Plywook Of Seasoned Wood Without Ventilator. Door Frame To Be Made Of 60Mm X 100Mm Teak Wood With Wrough Iron Hold Fasts. Door To Be Fitted With Brass Fitting-Hinges, Handles On Both Sides, Tower Bolts, Etc., Complete. Frame To Be Painted In Three Coats Of Synethic Enamel Paint Over A Coat Of Wood Primer Including Scrapping, Surface Preparation Etc., Complete.Door(Leaf) To Be Laminated On Both Sides With Laminations 1.5 Mm Thk And Grey In Color Of Approved Make/Brand.Size - 750X2100mm(Refer Attached Drawing) 83 Rolling Shutter Square Meters 3452.7 Yes Description => Rolling Shutter Supply, Fabrication And Fixing Of Ms Rolling Shutter Of The Following Specifications Including Grill Window Of 300 Mm Height At Eye Level For Visibility Even In Closed Position. Code: Conforming To Is 6248 1979 Type: Self Coiling Type (Manual) Curtains: Interlocking Cold Rolled Lath Section Of 0.8 Mm Thickness. Lock Plate : Ms Sheet Of 3.15 Mm Thick Reinforced With Ms Angles Of 35 X 35 Mm. Guide Channel : Ms Sheets Of 3.5 Mm Thick Bracket Plate : Ms Sheet Of 0.9 Mm Thick. Hood Covers : Ms Sheet Of 0.9 Mm Thick Locking Handle : To Be Provided Suitably. Rate Shall Include Providing And Fixing Holdfasts And Painting Two Coats Of Enamel Paint Of Approved Make And Shade Over Two Coats Of Zinc Phosphate Primer. Shutter Up To 10 Sqm -Push Pull Type Hand Operated With Ball Bearings , For 10 Sqm Upto 30 Sqm- Mechanical Operated Gear Type With Ball Bearing, A Pulling Hook Shall Be Provided For Each Of The Rolling Shutter. (Refer Attached Drawing) 84 Grill In Rolling Shutter Square Meters 3215.7 Yes Description => Grill In Rolling Shutter : Supply, Fabrication And Fixing Of Manually Operated Steel Rolling Net Shutter As Per The Specification. Nets To Be In Hexagonal Pattern, The Round Ms Bars Used For Jali Should Be 8Mm In Dia . All Other Specification As That Of Item For Rolling Shutter Above.(Refer Attached Drawing) 85 Ms Fan Hooks Each 72.5 Yes Description => Fan Hooks : Providing & Fixing Ms Fan Hooks With 16 Mm Dia Ms Bar Bent To Shape With Hooked Ends In Rcc Slab During Laying Including Painting The Exposed Portion. 86 Mortice Lock Each 1013.1 Yes Description => Mortice Lock Providing & Fixing Godrej Make Only Six Lever Lock ( Cylindrical/ Round Head ) Including All Necessary Hardware Etc. 87 Door Closer Each 1761.7 Yes Description => Door Closer Providing And Fixing Heavy Duty Door Closer. Of Approved Make Size No. 2. 88 Nonasbestos Cement Sheet-Roof Square Meters 391.9 Yes Description => Supply , Erection And Fixing Of Corrugated Asbestos Free Cement Sheet Of Approved Make Including Supply And Fixing Of Bitumen/Gi Washer, J Bolt Etc Complete As Per Manufacturers Recommendations. 89 Nonasbestos Cement Sheet -Side Square Meters 420.3 Yes Description => Supply , Erection And Fixing Of Corrugated Asbestos Free Cement Sheet Of Approved Make Including Supply And Fixing Of Bitumen/Gi Washer, J Bolt Etc Complete As Per Manufacturers Recommendations- But For Side Sheet Including Gable End. 90 Barricading Square Meters 1244.6 Yes Description => Providing & Fixing In Position 8 Ht Gi Sheet ( 22 Swg) With Angle Support (50X50x5 Mm ) At Every 2.4 M C/C And Horizontal Support Of 40X40x5 Angle At Equal Distance For 8 Ht &. The Job Includes Grouting Vertical Angle Supports In Rcc 1:2:4, Fixing The Sheets With Necessaru J Hooks, Painting With Synthetic Enamel Paint In Yellow And Black Strip Combination, And Dismantling & Disposing Off The Entire Material After Completion Of Work.(Refer Attached Drawing) 91 European Type W/C - Wall Each 7627.6 Yes Description => European Type Supplying And Fixing Pastel Colour Wall Mounted Vitreous China European Type Water Closet Comprising Of The Following Accessories Including Cutting And Making Good The Walls & Floors Wherever Required Complete As Directed By Engg.-In-Charge, Having Following (A) Pastel Colour Vitreous China European Water Closet With P Or S Trap Of Approved Make Having Integral Matching Conceled Cistern Supplied As Part Of The Closet With All Mechanisms, With Necessary Fittings, Brackets, Screws, Etc All Complete As Per The Direction Of Engg.-In-Charge.(B) 15Mm Nb Cp Brass Angle Valve Of Approved Brand As Per The Direction Of Engg.-In-Charge (C) 15 Mm Nb Cp Brss Inlet Connection With Brass Unions At The Ends. (D) Approved Make Matching Colour Polypropylene Seat Cover With Necessary Brass Hinges And Rubber Bushes Etc (E) Wc Connector With Neoprene Rubber Etc. 92 Europeantype W/C - Floor Each 5046.6.
