Tender For Misc Works In Smqs At Afs Hindan Ghaziabad Dg. 2026-27.

tender for Misc Works In Smqs At Afs Hindan Ghaziabad Dg. 2026-27.-1 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 2 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required.Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. Providing and placing C.P. Brass Extension Nipple (1/2x2 size) Providing and placingAnodised Aluminium butt hinges 100x75x4 mm Providing and placing Anodised Aluminium handles 100 mm with plate 150 x 32 mm Providing and placing Mirror of superior make glass 60x45 cm Providing and placing Polyethylene water storage tank with cover and suitable locking arrangement of 500 lt Providing and placingVitreous china lipped front urinal Providing and placing Vitreous china flat back wash basin 550x400 mm Providing and placing white vitreous china pedestal type water closet (European type) Providing and placing Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). Providing and placing Anodised Aluminium hanging type door stopper Providing and placing Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm with screws,bolts,nuts and washers complete Providing and placingHydraulic door closer tubular type Aluminium section body Providing and placing Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm Providing and placing Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings Providing and placing U-PVC pipes (working pressure 4 kg / sqcm.) Single socketed pipe 75 mm dia. Providing and placing C.P. Brass angle valve 15 mm Providing and placing Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with fittings, accessories and flush pipe) Providing and placing 15 mm PTMT bib cock Providing and placing 15 mm PTMT bib cock long body with flange Providing and placing PTMT pillar cock Providing and placing PTMT grating 100 mm dia. Providing and placing M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. Providing and placing Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia. Providing and placing 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts Providing and placing stainless steel SS grade 304 curtain rod 20 mm dia 1.20 mm thick Providing and Placing stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia 1.20 mm thick

Refer document

INR 16918.0 /-

INR 8.45 Lakhs /-

FileName	File Description	File Size	Download
af23276b-cc86-406c-ae58-1d56c4e4e321.html	Tender Documents	0 KB	Download
DocumentsList.zip	Tender Documents	0 KB	Download