tender for procurement of feeder pillar panel for various tube wells in ward no.-187, 188 and 189 in okhla constituency ac-54. , hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no. 2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no. 3. fully automatic star delta starter of 10hp, 3 phase oil immersed type 1no. 4. digital ampere meter 96mmx96mm square shape of 0-30 annual periodical maintenance range 1no. 5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no. 6. led indicating lamps with fitting (a set of 3 lamps) 1set 7. shunt capacitor of 5 kvar with three phase isolator 1no. 8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no. 9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1 no. 10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. make: all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.