tender for periodical services to certain buildings at mil stn kanasr under ge(n) bikaner; 1 external finishing works 2 taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by engineer in-charge. 3 m&l for cement plastering 15 mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/ parapet walls etc finished even and fair complete all as specified and as directed by engineer-in-charge. note:wpc will be measured and paid separately. 4 supply only integral water proofing-compound complete all as specified & as directed-by engineer-in-charge.make : pidilite/sika. 5 complete removal of existing treatment of any type/ description such as cement base paint. external emulsion etc from external surfaces of walls/ rcc surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc with mechanical means/grinder complete all as specified and directed engineer in-charge. 6 applying acrylic wall care putty 2mm thickness in external walls/ rcc surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony.- etc -(thickness vary - as required for - desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. make of wall putty : jk wall putty/ birla wall care putty/ bison wall putty. notes: (i) the prepared surface after wall putty, the contractor will inform to the ge.as well.as to the engineer-in charge for site inspection before applying further external finishes. please note that the further external finishes work will start only after approval of the prepared surface from the ge as well as to the engineer in-charge through site order. 7 material & labour for applying two or more coats of 100% premium acrylic emulsion exterior painthaving voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed by engineer in-charge.make of exterior wall primer : asian / berger / nerolac [best quality] make o f exterior emulsion : asian: (apex) / - berger (weather coat anti dust) / nerolac (excel total) 8 m & l for preparing existing treated surfaces of external walls/ rcc surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc including cornices and applying 01 coat of exterior emulsion paint @ sqm/litre/1 coat by using roller-to external walls/rcc surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces of exterior emulsion by using following brands of emulsion complete all as specified and directed. make of exterior emulsion:-asian (apex) / berger (weather coat anti dust) / nerolac (excel total). 9 m & l for preparing new palstered surfaces of external walls/rcc- surfaces/soffits of.chajjas/roof projections/cantilevers/ balcony etc including cornices and applying two coats of cement base paint @ 5 sqm/kg/1 coat over a coat of alkali resistant priming paint by using following brands of cement based paint complete allas specified & asditected. by engineer-in-charge.make of cement paint : snowcem plus (snowcem paints). 10 m & l for preparing existing treated surfaces of external walls /rcc surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc including cornices and applying one coat of cement base paint @5 sq.m/kg/1 coat by using following brands o f cement based paint complete all as specified & as directed by engineer-in-charge. make of cement paint: snowcem plus (snowcem paints) note for item nos. 1.01 to 1.10 : the cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by engineer-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this. 11 writing letters or figures (block, roman, italic.or indian)-not exceeding 30 cm high complete all as specified and directed by the engr-in-charge. 12 writing stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed by the engr-in-charge. 13 internal finishing works 14 takingdown cement plaster of any description, any thickness: from internal surfaces of walls/ceilings etc,incl raking our joints, hacking for keys, scrubbibg down with water etc complete allas specified and directed by engineer in-charge. 15 m&l for cement plastering 10 mm thick in cemet mortar 1:6 onbrick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge. 16 m&l for cement plastering 5 mm thickin cemet mortar 1:3 as on cellings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge. 17 complete removal of existing treatment of any type/description such as distempering work etc from internal surfaces of walls & ceiling with mechanical means/grinder and filling wall putty in depressions, sand papering etc and making the surface smooth and applying 02 coats of acrylic distemper (white or tinted) by using roller to wall surfaces over a coat of primer complete all as specified and directed by engineer-in-charge. make of interior, acrylic distemper asian (tractor) berger.(bison) / nerolac (beauty-smooth). complete all as specified and directed. 18 applying 02 coats of interior emulsion paint10 sq.m/litre/2 coats by using roller to wall/ceiling surfaces over &including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended-for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specifled and directed:make of interior wall-primer: asian / berger / nerolac [best quality]. make of interior emulsion : asian (tractor) / berger (bison) / nerolac (beauty smooth). 19 m & l for preparing existing treated surfaces on walls/ceiling by filling wall putty in depressions, sand papering etc and making the surface smooth and applying 01 coat of 1st quality acrylic distemper (white or tinted ready mixed with voc content less than 50 gms/ltr) by using roller to wall surfaces complete all as specified and directed by engineer-in-charge. make of interior, acrylic distemper asian (tractor) berger.(bison) / nerolac (beauty-smooth). 20 m & l for preparing existing treated surfaces on walls by filling wall putty in depressions, sand papering etc and making the surface smooth and applying 01 coat of interior emulsion paint (light shade) @ 20 sqm/litre/1coats b y using roller-to-wall-surfaces over & includinga coat of interior wall primer 10 sq m/litrelt coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all a s specified and directed.mäke of interior wall primer. asian /-berger / nerolac (best quality)make of interior, emulsion asian (tractor) berger.(bison) / nerolac (beauty-smooth). 21 m&l for preparation on newly plastered surface of wall/ceilingand applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat ofacrylic distemper over a coat of primer all as specified and directed by engr-in-charge. 22 m&l for preparing new plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site a n d shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth.1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution a n d the whole solution shall be stirred thoroughly before use complete all a s specified and as directed by engineer-in-charge. 23 m&l for preparing new plastered surfaces of ceilings and applying three coats of white wash by making t h e lime slaked at site and shall be mixed and stirred with about five liters of water for 1kg of unslaked-lime-to-make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime-cream. about 1:3. kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the.coating hard and rub resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole: solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge 24 m&l for complete removal of existing treatment on old plastered/unplastered surfaces of walls and applying three coats of white wash by making the lime staked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours: and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub resistant. small quantity of ultra marine blue (upto 3 gm per kg of lime) shall also beadded to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete allias specified and a s directed by engineer-in-charge. 25 m&l for complete removal of the existing treatment on ceilings by mechanical means and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime t o make a thin cream.:this shall b e allowed t o stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall-also-be added for every 10 kg oflime for making the coating h a r d a n d rub-resistant. small quantity of ultramarine blue (upto 3 g m per kg of lime) shall also be addedto the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all a s specified and as directed by engineer-in-charge. 26 m & l for preparing existing treated surfaces on walls including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of-water.for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours a n d shall then b e screened through clean coarse-cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rüb-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 27 m & l for-preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making..the lime. slaked.at site and_shall.be.mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream: about 1:3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg oflme for making the coating-hard and rub-resistant. small quantity of ultramarine blue.(upto 3 gm per kg,of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and a s directed by engineer-in-charge. 28 s/e painting on steel sureaces 29 m & l for preparing old painted steel and iron surfaces of any description, not otherwise described over-10 cm width or-girth-and applying one coat-of-synthetic-enamel-paint complete all a s specified a n d a s directed b y engr-in- charge. make: asian paints/berger/nerolac (ist quality). 30 m & l for preparing old painted steel and iron surfaces of any description, not otherwise described over-10 cm width or-girth-and applying one coat-of-fire-resistant -paintcomplete all a s specified a n d a s directed b y engr-in- charge. make: asian paints/berger/nerolac (ist quality). 31 m& l for preparing old painted steel and iron surfaces-of any description, not exc 10 cm width or girth and applying one coat-of-synthetic-enamel-paint complete all as specified and as directed by engr-in-charge.make : asian paints/berger/nerolac (ist quality). 32 m& l for preparing old painted steel and iron surfaces-of any description, not exc 10 cm width or girth and applying one coat-of-fire-resistant-paint complete all as specified and as directed by engr-in-charge.make : asian paints/berger/nerolac (ist quality). 33 s/e painting on wooden surfaces 34 m & l for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and a s directed by engr-in-charge. make: asian paints/berger/nerolac (ist quality). 35 m & l for preparing old painted wood & wood based surfaces-of-any-description,-not exc 10 cm width or.girth and applying one coat of synthetic enamel paint complete all as specified and as directed by engr-in-charge. make: asian paints/berger/nerolac (ist-quality). 36 m & l for preparing old french polishing on surfaces of any description,width or girth including cleaning and preparing and applying two coat of french polishing to old wooden surfaces including a coat of wood filler complete all as specified and as directed by engr-in-charge. 37 misc works 38 hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frames of any thickness including punching or drilling out old glazing pins/springs clipsall as directed by engineer-in -charge. 39 s&f sheet glass 4 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane all as directed by engineer-in -charge. 40 ditto- but figured glass pin headed type complete all as specified and as directed by engineer-in-charge. 41 m&l forremoving up roots of vegetation growth on building roof top/ sides of walls of any height n exc 30 cm girth and applying suitable acid for burning of the roots in the rcc/ brick wall surfaces including stacking of serviceable materials and disposal of unserviceable materials to a distance n exc 50 m and cleaning of site and making good of the disturbed surfaces in brick work in cm 1:4 and rendering 10 mm thick plaster in cm 1:4 or pointing in the same mortar surface area nexc 1 sqm in each place complete all as specified and as directed.