Tender Result - Bids Are Invited For 1 Providing And Placing In Positionmain Table With Side Table. Overall Size Shall Be 2350Mm(L) X 1200Mm(D) X 750Mm(H) With Side Table Of Size 1250Mm(L) X 500Mm(D) X 750Mm(H). The Main Table And Side Table Tops Are Made Of 25Mm Thick Mdf With Bottom Side Pre-Laminate Board Confirming To Is-14587:1998 And 0.4Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Modesty Panel Is Made Of 25Mm Thick Mdf - One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1- P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2Mm Thick Pvc Lipping. The Drawer Unit Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is12823:1990, Edge Banded With Matching 2Mm Thick Pvc Lipping. Drawer Units - Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Each Drawer Unit Shall Contain 3 Drawers I.E. Box + Box + File Type Which Uses Powder Coated 400Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Chrome Plated Flat Type Handles Are Provided For Ease Of Opening. Drawer Units Are Provided With Lock For Security. The Product Shall Be Certified With The Following: Cii Greenpro, Scs Indoor Advantage Gold, Ul Greenguard 2 Providing And Placing In Position High Back Chair. The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Materialpp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanism Shall Be Active Biosynchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Biosynchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. The Neckrest Assembly Consists Of Upholstered Neckrest Inner(Material-Poly Propylene) With Moulded Polyurethane Foam And Polyster Fabric. Upholstered Inner Shall Be Fixed To Neck Rest Cover. Neckrest Shall Be Fixed To Back Assembly Through Neckrest Spline. Overall Dimensions Of Chair Shall Be, Width Of Chair - 75.0Cm, Depth Of Chair - 75.0 Cm As Measured From Pedestal Below. Height From Ground - Min 109.3 To Max 124.4 Cm. Seat Height - Min 45.5Cm To Max 55.5Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. The Product Shall Be Certified With The Following: Cii Greenpro, Ul Greenguard, Scs Indoor Advantage Gold, Bifma Level 2. 4 Providing And Placing In Position Back Unit. The Back Unit Shall Be Of Dimensions 2350 X 500 X 1150Mm. It Shall Be Made Of 25Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. The Product Shall Be Certified With The Following: Cii Greenpro, Scs Indoor Advantage Gold, Ul Greenguard 7 Supplying And Placing In Place Of 2 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 1460W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg/Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood (Which Also Shall Be Resistance And Termite Proof As Per Is:303.) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. 1 Each 9 Supplying And Placing Center Table Of The Following Specifications. Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. 10 Providing In Place Of Main Table With Overall Size Of Table 1800 X 900 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Prelaminate Board With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. The Product Shall Be Certified With The Following: Cii Greenpro, Scs Indoor Advantage Gold, Ul Greenguard 12 Supplying And Placing Revolving Chair. 1. Seat Assembly – The Seat Is Made Up Of 1.4±0.1 Cm Thick – Pressed Plywood Upholstered With Fabric And Moulded Polyurethane Foam.2. Back Assembly– The Back Is Injection Moulded In Glass Filled Polypropylene Which Is Upholstered With Mesh Fabric .The Back Consist Of Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having An Adjustment Of 5.0 ±0.1Cm. Back Size : 44.5 Cm(W) × 57.5Cm (H)3. Polyurethane Foam– The Polyurethane Foam For Seat Is Of Density = 30±2Kg/M3.4. Armrests ( Ajustable) – The Height Adjustable Armrest Is Made Of Polypropylene And Can Be Adjusted To 6.0 ± 0.01 Cm Height .It Also Has Swivel And To And Fro Adjustment With Moulded Pu Armtop. 5. Mechanism – The Mechanism Is Designed With The Following Features. • 360 Degree Revolving Type.• Centre Tilt Syncro.• 4 Position (Including Upright Lock) Giving Option Of Variable Tilt Angle To The Chair.6. Headrest – The Headrest Is Made Up Of Injection Moulded Polypropylene Which Upholstered With Foam And Fabric . Its Has An Adjustment Of 3.0 ± 0.1 Cm & Its Assembled Over Greta Mid Back Chair.7. Pneumatic Height Adjustment – The Pneumatic Height Adjustment Is Chrome Plated With An Adjustment Stroke 0F 10.0 ± 0.3 Cm .8. Pedestral Assembly – The Pedestal Is Injection Moulded Nylon And Fitted With 5Nos. Twin Wheel Castors . The Pedestal Is 66.0 ± 0.5 Cm P.C.D.9. Twin Wheel Castors – The Twin Wheel Castors Are Injection Moulded In Black Polypropylene Having 5.0 ± 0.01Cm Wheel Diameter. Work Shall Be Carried Out Complete As Per Direction & Satisfaction Of Engineer In Charge. The Product Shall Be Certified With The Following: Cii Greenpro, Ul Greenguard, Scs Indoor Advantage Gold, Bifma Level 2 Total Quantity : 7

9959967

Central Public Works Department

Bids Are Invited For 1 Providing And Placing In Positionmain Table With Side Table. Overall Size Shall Be 2350Mm(L) X 1200Mm(D) X 750Mm(H) With Side Table Of Size 1250Mm(L) X 500Mm(D) X 750Mm(H). The Main Table And Side Table Tops Are Made Of 25Mm Thick Mdf With Bottom Side Pre-Laminate Board Confirming To Is-14587:1998 And 0.4Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Modesty Panel Is Made Of 25Mm Thick Mdf - One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1- P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2Mm Thick Pvc Lipping. The Drawer Unit Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is12823:1990, Edge Banded With Matching 2Mm Thick Pvc Lipping. Drawer Units - Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Each Drawer Unit Shall Contain 3 Drawers I.E. Box + Box + File Type Which Uses Powder Coated 400Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Chrome Plated Flat Type Handles Are Provided For Ease Of Opening. Drawer Units Are Provided With Lock For Security. The Product Shall Be Certified With The Following: Cii Greenpro, Scs Indoor Advantage Gold, Ul Greenguard 2 Providing And Placing In Position High Back Chair. The Cushioned Seat Assembly Shall Consists Of Seat Outer(Material30% Glass Fiber Nylon) And Upholstered Seat Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer(Material-Glass Fiber Filled Nylon) And Back Inner(Materialpp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be (W)-46.5Cm, (H)-60.0Cm & Size Of Seat Shall Be (W)-51.0Cm X (D)-49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height(6+/-0.5Cm) And Depth(6+/-0.5Cm). Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanism Shall Be Active Biosynchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat/Back Tilt Ratio Of 1:2, Active Biosynchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 +/- 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 +/- 0.5 Cm Pitch-Centre-Dia (75.0 +/- 1.0 Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine(Material-Glass Fiber Filled Nylon) Which Is Fixed To Aluminium Back Spine. The Neckrest Assembly Consists Of Upholstered Neckrest Inner(Material-Poly Propylene) With Moulded Polyurethane Foam And Polyster Fabric. Upholstered Inner Shall Be Fixed To Neck Rest Cover. Neckrest Shall Be Fixed To Back Assembly Through Neckrest Spline. Overall Dimensions Of Chair Shall Be, Width Of Chair - 75.0Cm, Depth Of Chair - 75.0 Cm As Measured From Pedestal Below. Height From Ground - Min 109.3 To Max 124.4 Cm. Seat Height - Min 45.5Cm To Max 55.5Cm. Dimensions Tolerance / Variations Shall Be Within +/- 1 Cm. The Product Shall Be Certified With The Following: Cii Greenpro, Ul Greenguard, Scs Indoor Advantage Gold, Bifma Level 2. 4 Providing And Placing In Position Back Unit. The Back Unit Shall Be Of Dimensions 2350 X 500 X 1150Mm. It Shall Be Made Of 25Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. The Product Shall Be Certified With The Following: Cii Greenpro, Scs Indoor Advantage Gold, Ul Greenguard 7 Supplying And Placing In Place Of 2 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 1460W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg/Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood (Which Also Shall Be Resistance And Termite Proof As Per Is:303.) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. 1 Each 9 Supplying And Placing Center Table Of The Following Specifications. Glass Shall Be 10+/-0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+/-0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. 10 Providing In Place Of Main Table With Overall Size Of Table 1800 X 900 X 750Mm. The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Prelaminate Board With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. The Product Shall Be Certified With The Following: Cii Greenpro, Scs Indoor Advantage Gold, Ul Greenguard 12 Supplying And Placing Revolving Chair. 1. Seat Assembly – The Seat Is Made Up Of 1.4±0.1 Cm Thick – Pressed Plywood Upholstered With Fabric And Moulded Polyurethane Foam.2. Back Assembly– The Back Is Injection Moulded In Glass Filled Polypropylene Which Is Upholstered With Mesh Fabric .The Back Consist Of Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having An Adjustment Of 5.0 ±0.1Cm. Back Size : 44.5 Cm(W) × 57.5Cm (H)3. Polyurethane Foam– The Polyurethane Foam For Seat Is Of Density = 30±2Kg/M3.4. Armrests ( Ajustable) – The Height Adjustable Armrest Is Made Of Polypropylene And Can Be Adjusted To 6.0 ± 0.01 Cm Height .It Also Has Swivel And To And Fro Adjustment With Moulded Pu Armtop. 5. Mechanism – The Mechanism Is Designed With The Following Features. • 360 Degree Revolving Type.• Centre Tilt Syncro.• 4 Position (Including Upright Lock) Giving Option Of Variable Tilt Angle To The Chair.6. Headrest – The Headrest Is Made Up Of Injection Moulded Polypropylene Which Upholstered With Foam And Fabric . Its Has An Adjustment Of 3.0 ± 0.1 Cm & Its Assembled Over Greta Mid Back Chair.7. Pneumatic Height Adjustment – The Pneumatic Height Adjustment Is Chrome Plated With An Adjustment Stroke 0F 10.0 ± 0.3 Cm .8. Pedestral Assembly – The Pedestal Is Injection Moulded Nylon And Fitted With 5Nos. Twin Wheel Castors . The Pedestal Is 66.0 ± 0.5 Cm P.C.D.9. Twin Wheel Castors – The Twin Wheel Castors Are Injection Moulded In Black Polypropylene Having 5.0 ± 0.01Cm Wheel Diameter. Work Shall Be Carried Out Complete As Per Direction & Satisfaction Of Engineer In Charge. The Product Shall Be Certified With The Following: Cii Greenpro, Ul Greenguard, Scs Indoor Advantage Gold, Bifma Level 2 Total Quantity : 7

Ghaziabad

Uttar Pradesh

Refer document

30-03-2026