tender for miscellaneous civil works at residential and other township building under pb area- 1 earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-chargeall kinds of soil 2 excavation work by mechanical means (hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 mordinary rock 3 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 4 clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared 5 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). 6 providing, hcisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 7 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo-mechanically treated bars of grade fe-500d or more 8 brick work with flyash bricks of class designation f&p (1:6) 9 finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 10 12 mm cement plaster of mix1:6 (1 cement: 6 fine sand) 11 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 12 finishing walls with water proofing cement paint of required shade old work (one or more coats @ 2.20 kg/10 sqm) complete 13 distempering with 1st quality acrylic distemper (ready mix) having voc content less than 50 grams/ litre of approved brand and manufacture to give an even shadeold work (one or more coats) 14 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 15 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeone or more coats on old work 16 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 17 providing & fixing white vitreous china water closet squatting pan (indian type) along with s or p trap including dismantling of old wc seat and s or p trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of engineer-in chargeorissa pattern w.c pan of size 580x440 mm 18 p/f upvc pipes complete with upvc fittings etc external work 20mm 19 p/f upvc pipes complete with upvc fittings etc external work 25mm 20 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 21 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore 22 providing and fixing brass bib cock of approved quality 15 mm nominal bore 23 providing and fixing g.i. union in existing g.i. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 15 mm nominal bore 24 providing and fixing g.i. union in existing g.i. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 25 mm nominal bore 25 providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. external work50 mm dia nominal bore 26 providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. external work80 mm dia nominal bore 27 providing and fixing g.i. union in existing g.i. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 50 mm nominal bore 28 providing and fixing g.i. union in existing g.i. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 80 mm nominal bore 29 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings completesemi rigid pipe32 mm dia 30 making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 250 to 300 mm diameter 31 half brick masonry with non modular fly ash bricks of class designation 10, conformingio is :12894, in super structure above plinth and upto floor v levelcement mortar 1 : 4 (1 cement : 4 coarse sand) 32 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-chargewith cement mortar 1:4 (1 cement : 4 fine sand) 33 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete40 mm thick with 20 mm nominal size stone aggregate 34 total impact of gst for the purpose of ctc please enable macros to view boq information