tender for mow work of govt. bungalow no. b-10, 74 bungalow under m-1 sub dn, pwd bhopal; 1 mow work of govt. bunglow no. b-10, 74 bunglow under m-1 sub dn, pwd bhopal please enable macros to view boq information bill of quantities (boq) name of work : mow work of govt. bunglow no. b-10, 74 bunglow under m-1 sub dn, pwd bhopal probable amount of contract : (rs. in figures) : rs. 60.57 lacs (rs in words) : rupees time alloved : 9 months sno sor item particulers of item unit rate remark 2 2.7 2.7.1 ordinary rock cum 287.0 2.7.2 hard rock (requiring blasting) cum 519.0 2.7.3 hard rock (blasting prohibited) cum 828.0 3 2.9 2.9.1 pipes, cables etc., not exceeding 80 mm dia. metre 96.0 2.9.2 pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 156.0 2.9.3 pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. metre 244.0 4 2.27 2.27.1 with hard muram having cbr >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of mdd) in layers not exceeding 20cm in thickness and dressing complete. (note:- maximum thickness of this layer to be provided shall be 30cm) cum 393.0 2.27.2 supplying and filing in plinth with soil (other then bc soil ) having mdd not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of mdd) in layers not exceeding 15cm depth and dressing complete. cum 331.0 5 2.3 2.30.1 along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with chlorpyriphos/ lindane e.c. 20% with 1% concentration. metre 36.0 2.30.2 along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. with chlorpyriphos/ lindane e.c. 20% with 1% concentration. metre 42.0 2.30.3 treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, with chlorpyriphos/ lindane e.c. 20% with 1% concentration. sqm 199.0 2.30.4 treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with chlorpyriphos/ lindane e.c. 20% with 1% concentration. metre 50.0 2.30.5 treatment at points of contact of wood work by chemical emulsion chlorpyriphos/ lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. metre 201.0 6 4.1 4.1.1 with 20mm nominal size graded stone aggregate. 4.1.1.1 m-25 – grade concrete cum 6338.0 4.1.1.2 m-20 – grade concrete cum 4933.0 4.1.1.3 m-15 – grade concrete cum 4471.0 4.1.1.4 m-10nominal (mix-1 cement : 3 sand : 6 graded stone aggregate ) cum 3890.0 4.1.2 with 40mm nominal size graded stone aggregate. 4.1.2.1 m-15 - grade concrete cum 4403.0 4.1.2.2 m-10 nominal (mix -1 cement : 3 sand : 6 graded stone aggregate) cum 3808.0 4.1.2.3 m-7.5 nominal mix -1 cement : 4 sand : 8 graded stone aggregate cum 3474.0 4.1.3 with fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary portland cement : 2 fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) cum 3459.0 4.1.3.2 1:2½:4:11 (1 ordinary portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) note: no fly ash is to be added to portland pozzolona cement in any case which itself contains fly ash. cum 3150.0 7 5.1 excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 5.1.1 m-20 grade concrete cum 6153.0 5.1.2 m-15 grade concrete cum 5397.0 8 5.2 5.2.1 m-20 grade concrete cum 6231.0 9 5.3 5.3.1 m-20 grade concrete cum 6541.0 10 5.9 5.9.1 foundations, footings, bases of columns, etc. for concrete upto plinth level sqm 190.6 5.9.2 walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 uptoplinthlevel. sqm 219.0 5.9.2.2 above plinth upto 3.6 m height from plinth level sqm 330.0 5.9.2.3 extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. sqm 40.0 5.9.3 suspended floors, roofs, landings, balconies and access platform. sqm 439.6 5.9.4 shelves(cast in situ) sqm 290.0 5.9.5 lintels, beams, girders, bressumers and cantilevers sqm 356.0 5.9.6 columns, p i l l a r s , piers, abutments, posts and struts. sqm 471.2 5.9.7 stairs, (excluding landings) except spiral- staircases. sqm 435.7 5.9.8 spiral staircases (including landing). sqm 450.0 5.9.9 arches, domes,vaults upto 6m span sqm 1141.6 40307.0 extra for arches, domes, vaults exceeding 6 m span sqm 451.3 40672.0 chimneys and shafts sqm 294.0 41038.0 coffer/waffle slab of any size or shape as shown in the drawing. sqm 1481.0 41403.0 well steining sqm 264.0 41768.0 vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. sqm 643.4 42133.0 extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). sqm 0.2 42499.0 small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. sqm 191.0 42864.0 cornices and mouldings sqm 565.0 43229.0 small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. sqm 529.6 43594.0 weather shade, chajjas, corbels etc., including edges. sqm 534.2 43960.0 suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick. (item to be executed with prior permission of s.e. in case of b & r works and from additional project director in case of piu works) sqm 575.35 44325.0 lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of s.e. in case of b&r works and from additional project director in case of piu works) sqm 521.2 11 5.1 5.10.1 suspended floors, roofs, landing, beams and balconies (plan area to be measured). sqm 212.0 12 5.16 5.16.1 mild steel and medium tensile steel bars. kg 78.0 5.16.2 hard drawn steel wire kg 75.0 5.16.3 cold twisted bars (ctd) kg 81.0 5.16.4 hot rolled deformed bars kg 81.0 5.16.5 hard drawn steel wire fabric kg 76.0 5.16.6 thermo-mechanically treated bars. (tmt/tmx) fe 500 d or more conforming to is 1786 kg 80.0 13 6.2 6.2.1 cement mortar 1:4 (1 cement : 4 sand) cum 6012.0 6.2.2 cement mortar 1:6 (1 cement : 6 sand) cum 5821.0 14 9.18 9.18.1 35 mm thick including isi marked stainless steel butt hinges with necessary screws. sqm 2823.0 9.18.2 30 mm thick including isi marked stainless steel butt hinges with necessary screws. sqm 2648.0 9.18.3 25 mm thick (for cupboard) including isi marked nickel plated bright finished m.s. piano hinges is: 3818 marked with necessary screws. sqm 2465.0 15 9.19 9.19.1 35 mm thick including isi marked stainless steel butt hinges with necessary screws. sqm 1870.0 9.19.2 30 mm thick including isi marked stainless steel butt hinges with necessary screws. sqm 1696.0 9.19.3 25mm thick (for cupboard) including isi marked nickel plated bright finished m.s. piano hinges with necessary screws. sqm 1623.0 16 9.43 9.43.1 fixed to steel windows by welding. kg 119.0 9.43.2 fixed to openings /wooden frames with rawl plugs screws etc. kg 128.0 17 9.79 9.79.1 400x10 mm each 400.0 9.79.2 250x10 mm each 329.0 9.79.3 200x10 mm each 261.0 9.79.4 150x10 mm each 221.0 9.79.5 100x10 mm each 142.0 18 9.124 9.124.1 with 2nd class teak wood beading 62x19 mm. sqm 1689.0 9.124.2 with 12 mm mild steel u beading. sqm 1370.0 19 9.134 9.134.1 1.5 mm thick. sqm 851.0 9.134.2 1.0 mm thick. sqm 691.0 20 9.169 9.169.1 single rebate (75 mm x 50 mm) rm 459.0 9.169.2 single rebate (100 mm x50 mm) rm 720.0 9.169.3 single or double rebate (125 mm x 65 mm) rm 923.0 21 9.17 9.170.1 24 mm thick wpc (wood polymer composite) solid plain flush door shutter sqm 2250.0 9.170.2 28 mm thick wpc (wood polymer composite) solid plain flush door shutter sqm 3250.0 9.170.3 30 mm thick wpc (wood polymer composite) solid plain flush door shutter sqm 3693.0 9.170.4 35 mm thick wpc (wood polymer composite) solid plain flush door shutter sqm 4135.0 22 10.14 10.14.1 hot finished welded type tubes kg 117.0 10.14.2 hot finished seamless type tubes kg 123.0 10.14.3 electric resistance or induction butt welded tubes. kg 98.0 23 11.22 ,vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. samples approved by engineer-in- charge. 11.22.1 raj nagar plain/white marble/udaipur green marble /zebra black sqm 1797.0 11.22.2.1 granite fine grained dark crystal of other colours and various patterns sqm 2356.0 11.22.2.2 granite coarse grained light black/ light red/white with crystal of other colours and various patterns sqm 2113.0 11.22.2.3 granite grey/pink/brown with various patterns sqm 1808.0 11.22.3 cuddpah stone sqm 1279.0 24 11.29 11.29.1 area of slab over 0.50 sqm 11.29.1.1 fine grained granite dark black/dark red/ white or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2919.0 11.29.1.2 coarse grained granite light black/light red/ off white or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2675.0 11.29.1.3 gray/pink/brown or equivalent with various patterns sqm 2370.0 11.29.2 area of slab upto 0.50 sqm 11.29.2.1 fine grained granite dark black/dark red/ white or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2705.0 11.29.2.2 coarse grained granite dark black/dark red/ white or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2486.0 11.29.2.3 gray/pink/brown or equivalent with various patterns sqm 2212.0 25 11.4 11.40.1 marble work meter 160.0 11.40.2 granite work. meter 269.0 26 11.66 27 11.72 11.72.1 80 mm thick c.c. paver block of m-35 grade sqm 805.0 11.72.2 60 mm thick c.c. paver block of m-35 grade sqm 680.0 11.72.3 60 mm thick c.c. paver block of m-30 grade sqm 605.0 28 11.8 11. 80.1 in light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) size 300x300 mm thickness 9-10 mm sqm 934.0 11. 80.1.2 (b) size 600x600mm thickness 9-10mm sqm 1206.0 11. 80.1.3 (c) size 600x600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1349.0 11. 80.2 in dark colour and shade etc. 11. 80.2.1 (a) size 300x300 mm thickness 9-10 mm sqm 946.0 11. 80.2.2 (b) size 600x600mm thickness 9-10mm sqm 1340.0 11. 80.2.3 (c) size 600x600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1546.0 29 11.82 11. 82.1 for floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 size 600x600 mm thickness 9-10 mm sqm 1140.0 11. 82.1.2 size 800x800mm thickness 9-10 mm sqm 1261.0 11. 82.1.3 size 800x1600 mm thickness 9-10 mm sqm 1489.0 11. 82.1.4 size 1000*1000 mm thickness 9-10 mm sqm 1388.0 11.82.1.5 size 600*1200 mm thickness 9-10 mm sqm 1235.0 11.82.16 size 800*1200 mm thickness 9-10 mm sqm 1450.0 11.82.1.7 size 1200*1200 mm thickness 9-10 mm sqm 1596.0 11.82.1.8 size 1200*1800 mm thickness 9-10 mm sqm 1715.0 11.82.1.9 size 1200*2400 mm thickness 9-10 mm sqm 2403.0 11. 82.2 for wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, size 300x600 mm thickness 9-10 mm sqm 968.0 30 11.83 11. 83.1 for skirting, risers etc.glossy/rustic/stain/matt finished in all colours and shades 11. 83.1.1 size 600x600 mm thickness 9-10 mm sqm 1129.0 11. 83.1.2 size 800x800mm thickness 11-12mm sqm 1250.0 11. 83.1.3 size 600x1200 mm thickness 11-12mm sqm 1224.0 11. 83.1.4 size 800x1200 mm thickness 11-12mm sqm 1440.0 31 12.15 32 12.16 12.16.1 ridges plain (500 - 600mm). meter 320.0 12.16.2 flashings/ aprons.( upto 600 mm) meter 284.0 12.16.3 north light curves. meter 341.0 12.16.4 barge board (upto 300 mm) meter 274.0 12.16.5 crimp curve sqm 315.0 12.16.6 gutter. (600 mm over all girth) meter 781.0 33 12.17 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. sqm 1031.0 12.17.2 2mm thick flat. sqm 955.0 34 12.32 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) metre 136.0 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) metre 238.0 35 12.33 12.33.1 coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) each 67.0 12.33.1.2 110 mm (minimum wall thickness 2.2mm) each 102.0 12.33.2 single push fit coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) each 121.0 12.33.2.2 110 mm (minimum wall thickness 2.2mm) each 94.0 12.33.3 single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) each 176.0 12.33.4 single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) each 163.0 12.33.5 bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) each 78.0 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) each 112.0 12.33.6 shoe (plain) 12.33.6.1 75 mm shoe (minimum wall thickness 1.8mm) each 69.0 12.33.6.2 110 mm shoe (minimum wall thickness 2.2mm) each 99.0 36 13.1 41275.0 1:4 (1 cement : 4 sand) sqm 173.0 41276.0 1:6 (1 cement : 6 sand) sqm 160.0 37 13.2 41306.0 1:4 (1 cement : 4 sand) sqm 184.0 41307.0 1:6 (1 cement : 6 sand) sqm 168.0 38 13.27 13.27.1 g.i. chicken mesh as per isi specification and in the required width with 50mm long bombay nails before plastering upt 10 meter height. sqm 62.0 13.27.2 providing and fixing fibre mesh of 145 gsm weight in required width with cement mortar before plastering upto 10m height. sqm 45.00 39 13.41 40 13.46 41 13.47 13.47.1 one coat. sqm 20.0 13.47.2 two coats. sqm 32.0 42 13.51 43 13.52 44 13.65 45 13.67 13.67.1 with ready mixed pink or grey primer on wood work (hard and soft wood) having voc content less than 50 grams/ litre. sqm 28.0 13.67.2 with ready mixed red oxide zinc chromatic on steel/ iron works having voc content less than 250 grams/litre. sqm 24.0 13.67.3 with water thinnable cement primer on wall surface having voc content less than 50 grams/litre. sqm 24.0 46 17.59 17.59.1 coupler 17.59.1.1 75 mm each 117.0 17.59.1.2 110 mm each 154.0 17.59.2 single pushfit coupler 17.59.2.1 75 mm each 140.0 17.59.2.2 110 mm each 195.0 17.59.3 single tee with door 17.59.3.1 75x75x75 mm each 219.0 17.59.3.2 110x110x110 mm each 346.0 17.59.4 single tee without door 17.59.4.1 75x75x75 mm each 201.0 17.59.4.2 110x110x110 mm each 266.0 17.59.5 bend 87.50 17.59.5.1 75 mm bend each 117.0 17.59.5.2 110 mm bend each 172.0 47 17.6 17.60.1 75 mm each 33.0 17.60.2 110 mm each 50.0 48 17.61 49 17.64 17.64.1 semi rigid pipe 17.64.1.1 32 mm dia each 87.0 17.64.1.2 40 mm dia each 98.0 17.64.2 flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia each 87.0 17.64.2.2 40 mm dia each 98.0 50 17.65 51 17.66 52 17.67 53 17.68 17.68.1 circular shape 450mm dia. sqm 806.0 17.68.2 rectangular shape 453x357mm sqm 642.0 17.68.3 oval shape 450x350mm (outer dimensions) sqm 697.0 17.68.4 rectangular shape 1500x450 mm sqm 1311.0 54 17.78 17.78.1 100 mm dia. each 74.0 55 18.6 18.6.1 internal work - exposed on wall 18.6.1.1 15 mm nominal outer dia pipes. metre 129.0 18.6.1.2 20 mm nominal outer dia .pipes. metre 153.0 18.6.1.3 25 mm nominal outer dia .pipes. metre 177.0 18.6.1.4 32 mm nominal outer dia pipes. metre 254.0 18.6.1.5 40 mm nominal outer dia pipes. metre 354.0 18.6.1.6 50 mm nominal outer dia .pipes. metre 528.0 18.6.2 concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .pipes. metre 207.0 18.6.2.2 20 mm nominal outer dia .pipes. metre 234.0 18.6.2.3 25 mm nominal outer dia pipes. metre 288.0 18.6.2.4 32 mm nominal outer dia pipes. metre 360.0 56 18.7 external work 18.7.1 15 mm nominal outer dia pipes. metre 122.0 18.7.2 20 mm nominal outer dia .pipes. metre 141.0 18.7.3 25 mm nominal outer dia pipes. metre 185.0 18.7.4 32 mm nominal outer dia .pipes. metre 238.0 18.7.5 40 mm nominal outer dia pipes. metre 324.0 18.7.6 50 mm nominal outer dia .pipes. metre 498.0 18.7.7 62.50 mm nominal inner dia pipes. metre 1429.0 18.7.8 75 mm nominal inner dia .pipes. metre 2018.0 18.7.9 100mm nominal inner dia .pipes. metre 2791.0 18.7.10 150 mm nominal inner dia pipes. metre 3358.0 57 18.8 18.8.1 internal work - exposed on wall 18.8.1.1 15 mm dia. nominal bore metre 211.0 18.8.1.2 20 mm dia. nominal bore metre 255.0 18.8.1.3 25 mm dia. nominal bore metre 300.0 18.8.1.4 32 mm dia. nominal bore metre 361.0 18.8.1.5 40 mm dia. nominal bore metre 479.0 18.8.1.6 50 mm dia. nominal bore metre 596.0 18.8.2 concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore metre 269.0 18.8.2.2 20 mm dia nominal bore metre 309.0 18.8.3 external work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore metre 188.0 18.8.3.2 20 mm dia. nominal bore metre 223.0 18.8.3.3 25 mm dia. nominal bore metre 263.0 18.8.3.4 32 mm dia. nominal bore metre 310.0 18.8.3.5 40 mm dia. nominal bore metre 402.0 18.8.3.6 50 mm dia. nominal bore metre 492.0 18.8.3.7 65 mm dia. nominal bore metre 533.0 18.8.3.8 80 mm dia. nominal bore metre 622.0 58 18.13 18.13.1 25 mm nominal bore each 428.0 18.13.2 32 mm nominal bore. each 500.0 18.13.3 40 mm nominal bore each 584.0 18.13.4 50 mm nominal bore each 749.0 59 18.19 18.19.1 with common burnt clay bricks of 25 kg /sqcm compressive strength. each 5416.0 18.19.2 with flyash bricks of 50 kg/cm2 strength each 4995.0 60 18.28 61 19.4 10mm gap for thermal expansion all necessary fittings etc. complete. excavation to be paid seperataly. 19.4.1 110 mm diameter od (min. wall thickness 3.2mm) metre 234.0 19.4.2 160 mm diameter od (min. wall thickness 4.0mm) metre 477.0 19.4.3 200 mm diameter od (min. wall thickness 4.9mm) metre 751.0 19.4.4 250 mm diameter od (min. wall thickness 6.2mm) metre 972.0 19.4.5 300 mm diameter od (min. wall thickness 7.7mm) metre 1232.0 62 19.5 19.5.1 110 mm diameter pvc. pipe metre 576.0 19.5.2 160 mm diameter pvc. pipe metre 704.0 19.5.3 200 mm diameter pvc. pipe metre 821.0 19.5.4 250 mm diameter pvc. pipe metre 949.0 19.5.5 300 mm diameter pvc pipe metre 1078.0 63 19.9 19.9.1 inside size 90x80 cm and 45 cm deep including c.i. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 with well burnt bricks each 7997.0 19.9.1.2 with sewer bricks conforming to is : 4885 each 7747.0 64 19.35.1 19.35.2 deduct for not provide c.i. manhole cover with frame for item no. 19.9.2.1 & 19.9.2.2 each 6185.0 19.35.3 deduct for not provide c.i. manhole cover with frame for item no. 19.9.3.1 & 19.9.3.2 each 10454.0 65 21.1 21.1.1 for fixed portion. 21.1.1.1 anodised aluminium (anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac15) kg 378.0 21.1.1.2 powder coated aluminium (minimum thickness of powder coating 50 micron) kg 416.0 21.1.1.3 polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg 426.0 21.1.2 for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required (fittings shall be paid for separately). 21.1.2.1 anodised aluminium (anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac15) kg 416.0 21.1.2.2 powder coated aluminium (minimum thickness of powder coating 50 micron) kg 485.0 21.1.2.3 polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg 494.0 21.1.3 deduct for not providing edpm rubber/neoprene gasket all around. kg 80.0 66 21.3 21.3.1 with float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm 774.0 21.3.2 with float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) sqm 948.0 21.3.3 with float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). sqm 1182.0 67 25.5 25.5.1 anti germ fluoro-polymer coated single piece w.c. pan size 770 x 375 x 695mm with solid poly propelyne made soft closing seat cover each 34317.0 .(premium range) 25.5.2 anti germ fluoro-polymer coated single piece w.c. pan size 370 x 685 x 835mm with solid poly propelyne made soft closing seat cover.(premium range) each 24685.0 25.5.3 anti germ fluoro-polymer coated single piece w.c. pan size 390 x 710 x 710mm with solid poly propelyne made soft closing seat cover.(premium range) each 22362.0 25.5.4 anti germ fluoro-polymer coated single piece w.c. pan size 360 x 640 x 690mm with solid poly propelyne made soft closing seat cover.(premium range) each 15393.0 68 25.1 25.10.1 white vetrious china anti germ fluoro-polymer coated wash basin size 1595x435x185mm with table mounted single lever tall boy basin mixture, (cartridge size 32mm.) (premium range) each 18585.0 25.10.2 white vitreous china type anti germ fluoro- polymer coated counter top wash basin size 530x420x140mm with tall boy basin mixture, (cartridge size 32 mm). (premium range) each 16785.0 69 25.12 25.12.1 white vetrious china anti germ fluoro-polymer coated urinal size 340 x 325 x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (premium range) each 23927.0 25.12.2 white vetrious china anti germ fluoro-polymer coated urinal size 385 x 325 x 635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (premium range) each 20025.0 77 25.82 sub engineer sub divisional officer executive engineer sec. p.w.d. m- 1sub dn. p.w.d. new bhopal division bhopal bhopal.