tender for in year 2025-26 special repair work of culvert work in bangra-jagammanpur to jamrehi awwal link road. - construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. 2 providing laying spreading and compacting stone aggregates of specific size 45-63 mm to water bound macadam specificationincluding spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 km in stages to proper grade and camber , mord g-2 3 providing laying spreading and compacting stone aggregates of specific size 22.4-53 mm to water bound macadam specificationincluding spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 km in stages to proper grade and camber , mord g-3 4 providing and applying tack coat with bitumen vg-10 using bitumen distributor @ 0.30 kg / sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per mord technical specification clause 503 5 20 mm thick open-graded premix carpet using bituminous (penetration gradie / modified bitumen) binder providing and laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade 6 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grede and cross fall using type c as per technical specification mord sepecification no. clause 510. as per data book item no. 5.12 (b) case - iiitype 7 construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no. 303.1 8 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material. 9 sand fillingin plinth including supply of necessaryquantityof sand approved quarryfromthe site of work & including watering, dressing etc. rate to include cost of all materials, labour and tools & plants etc. required for proper completion of the work. 10 providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specifications clauses 802,803,1202 & 1203 11 brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications clauses 600,1200 & 1203 12 plastering with cement mortar (1:4) mm thick on brick work in substructure as per techinical specification clauses 613.4 & 1204 13 supply & laying ofhume pipe s & stype in positionwith cement and sandmortarin 1:2 withsunincluding labour and t & p etc. required for proper completion of work as per direction ofby the engineer-in-chargen.p-3-type(a) 600 mm dia.