tender for carry out temporary repairs at the identified black spot agwanpur on the moradabad haridwar dehradun road. traffic signs - 90 cm equilateral triangular board providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. lko s.i. no. 18(i) chap. 26. , traffic signs - maximum speed limit providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designd foundation with m-15 grade cment concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.lko s.i. no. 18(v) chap. 26. , providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc: 35 the finished surface to be level, uniform and free from streak and holes edge line/centre line/zebra crossing/rumble stripe lko s.i. no. 2 chap. 26. , providing and laying repeated bar marking with hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per irc: 35 the finished surface to be level, uniform and free from streak and holes as per irc : 35-2015. lko s.i. no. 18(iii) chap. 26. , direction and place identification signs with size more than 0.9 sqm size board type iv providing and fixing of retro reflective cautionary, mandatory and informatory sign as per irc : 67-2012 made of high intensity grade sheeting vide clause 801.3 friced over aluminium sheeting type iv 1.5 mm thick supported on a mild steel angle iron pst 75mm x 75mmx 6mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement 45cmx45cmx60cm below ground level as per aproved drawing. 1.20x0.90m rectangular board type iv , speed table (trapezoidal hump) providing and constructing of speed table with stone set pavement and premix carpet to the required grade, level and alignment, rolling with smooth wheeled roller to achive the desired compaction as per direction e/i. , relective raised pavement marker (road studs/cat eye) supply and fixing of reflective raised pavement marker with its body surface made of tough asa (styrene acrylonitrite) or hips high inpact polystyrence) or acrylontirle butadiens styrence (abs), the marker shall a lord of 1335 kg tested in accordance with astmd 4280 & its reflective panels shall consist of no of lenses containing single or dual prismatic cube of providing total internal reflection of the light entiring the lense face retro reflecting surface shall preferably be 35 ±5o to base and area of each retro reflecting surface shall not be less than 13.0 sqcm road studs shall be visiblily marked with name trademark or other means of identification of the menufacturer diamention of road studs should not be less than 100mmx100mmx10mm rpm (with shank) as per astm.