tender for record room file rake installation and room repairing work from zone-5 office nagar nigam. - dismentling existing plaster including disposal of refuse as directed by engineer in charge within a distance of 60 meters 2 15mm thick cement plaster in 1:4 cement, fine sand etc all complete. 3 finishing wall with putty brand of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 4 finishing walls with exterior emulsion paint (apex) of approved brand and manufacture 5 file rack.60mm thickness metal body glass door spray paint finish 6 supply and fixing of 36 watt to 46 watt indoor recess mounting led square fitting for armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate meterial and driver set complete in all respect. 7 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6. amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 8 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 9 wiring for circuit/submain wiring along with earth wire with the following size fr pvc insulated copper conductor single core cable in surface/recessed pvc conduit comp. as required 2x2.5 sq mm +1x2.5 sqmm earth wire dsr-1.14.2 10 wiring point for light with 1.5 sq. mm.frlsh pvc insulatedmultistrand single core copper conductor cable in pvc conduit with 1.5 sq. mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in the wall and partly laid in slab with, gp box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc complete in all respect as directed including matching colour wash. sor-2018 item 138 (c 11 ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking.metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/sqm, both side inclusive) consisting of main t runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross t of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main t at 600 mm center to center to form a grid of 1200x600 mm and secondary cross t of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm 12 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 13 63 mm dia (od-63 mm & id-51 mm nominal)wiring point for fan with 1.5sq mm fr pvc insulated copper conductor cable in 25mm dia heavy duty etc all compete. 14 supply and fitting of ceiling fan usha, khetan, bajaj i.s.i mark including all complete. 15 providing and fixing isi marked flush door shutters conforming to is: 2202 (part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 16 carrier 2.0 ton 3 star, inverter split a.c. installtion and fixing charges included all complete. 17 add gst 18 18 add gst 28