bids are invited for bath stool pvc , chair easy - chair easy. all wood shall seasoned first class teak wood free from knots and defects.hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide,white colour, quality as approved by ge all as specified and as shown on drgs.all wooden surface shall be french polished with glossy finish, shade as approved by ge.rest all as specified/ shown in drawing and directed by engineer-in-charge. drg no fd-229 , charpoy ip hard top - charpoy ip hard top. long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms pipe.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as specified/ shown in drawing and directed by enginer-in-charge. drg no fd/map-ii/01 , table writing - table writing. all wood shall be of seasoned 1st class hardwood teakwood. legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. top of tables shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table. two short stiffeners of teakwood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. sides of the box which house the drawers and cabinet shall be 18mm thick pre-laminated particle board exterior grade. sides and back of drawe