tender for for supply of electric line materials under o&m head budget fy- 2025-26 , electrical items : , earthing complete conventional type having intermittent layer of charcoal and salt , ace chemrod ( artificial concept of earthing by chemical rod ) :- ace chemrod earthing electrode (consisting mild steel galvanised pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanised pipe. a highly conductive substance is to be filled in residual gap between pipe and rod) with highly conductive substances not less than 25 kg for soil treatment , earthing (chemical) with gi earthing pipe 40 mm 3.1 mtrs. long (bentonite as intermittent layers) , earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long , gi service pipe 40mm diameter 3mtr length , gi stay set completefor d/s/s (1900x20 mm) with staywire 7/10 swg 8 kgs & guy insulator) , gi stay set complete for d/s/s(1900x16mm) with staywire7/12swg andguy insulator , 11kv stay set complete (1800x16 mm) with stay wire 7/10 swg 8 kgs & guy insulator) , lt stay set complete (1700x16 mm) with stay wire 7/12 swg , anticlimbing device(barbed wire) , danger board 33kv , jointing sleeve (aluminium)suitable for 150-232sq.mm , earth clamp for earthwire (50 x 6 mm) [galvanized] , p g clamp for 200/150 sq mm conductor , p g clamp for 80/100 sq mm conductor , gi wire 6 swg , suitable lugs , suspension clamp assembly suitable upto 70 -95 sqmm bare messenger (including 1 no. suspension clamp with bracket ,2 mtr ss strap + 2 nos. ss buckles) , dead end clamp suitable for 95-150 sq. mm. bare messenger (including 1 no. dead end bracket + 1 no. dead end + 1.5 mtr ss strap + 2 nos. ss buckle) , angle/side stay clamp ( 50x6 mm) for 8 mtr 200kg psc pole[galvanized] , lt ab cable accessory, 1.1mtr. stainless steel strap if207(20x0.7) , buckle for strap , spring loaded distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming and out going 3 phase connection as per field requirement , service main anchor clamp for proper support of service cable(4mm2 and 10 mm2) , gi stay wire 7/8, 7/10, 7/12, 7/14, 7/16 , lt pre insulated mid span joint suitable 50 sqmm , lt pre insulated mid span joint suitable 95 sqmm , gi base plate for 33kv , stone base plate for 11kv,dss,,lt , suspension clamp suitable for 95 -150 sq. mm. baremessenger (including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle) , dead end clamp suitable above70 sq. mm. bare messenger (including 1 no. dead end bracket + 1 no. dead end + 2 mtr ss strap + 2 nos. ss buckle) {minimum breaking load -15 kn } , dp channel support clamp (50x6mm)for 8mtr 200kg psc pole {galvanized}(1.1kgs .each , galvanised nuts & bolts (assorted size) , hot dip galvanized fabricated iron material for 33 kv line, lt line & dss ** note: 1. gst must be define/ mentioned otherwise price part not be considered., 2. ** mt/kg.