annual plan-pothukallu grama panchayath mcf wiring-so165/26-general electrical work-- 1 electrification 2 1.10.3:wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed medium class pvc conduit,with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frlspvc insulated copper conductor single core cable etc as required.group c 3 1.25:supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 4 90.3.20.3:supply & installation of light fittings on tw round block supply, conveyance installation testing and commissioning the light fittings of following types made of crca with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with pvc round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant iss and giving connections as required.1200 mm 1x20w led lamp with box type fixture 5 od25947/2025-2026:supply conveyance, installation, testing and commissioning of 50 led flood light with ip 65 protection led chip make acrylic cover complete with thd less than10%, power factor greater than 0.98, rohs compliant, duly wired up for use on 230 v ac supply. driver compartment should be seperatly accessible for maintenance,including giving connections with required length ofpvc insulated and pvc sheathed 3 core round copper conductor flex wire conforming to relevant iss etc as required. 6 od25232/2025-2026:supply and fixing12w ledbulk head fittingheat resistant prismatic glass cover to wall / ceiling including giving connections with required length of 16/0.20mm pvc insulated and pvc sheathed 3 core round copper conductor flex wire conforming to relevant iss or extending the original wiringand making good the surface as required. 7 90.4.5.4:supply, installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/watt), air delivery minimum 210(cubic meter/minute), copper winding suitable for 230v/240v single phase ac supply 8 90.4.2:supply and installation of suitable size ms belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 nos with m.s. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per is 732 as required. 9 1.58:supplying and fixing pvc batten/ angle holder including connection etc. as required. 10 od25230/2025-2026:supplying and fixing9 w led bulb including connection etc. as required 11 od25967/2025-2026:supply, installation testing and commissioning exhaust fan of size 150mm or nearest size sweep light duty with self opening lowers in the existing opening, fixing necessary anchor bolts/bolt and nut with 0.3m,110mm pvc pipe neatly plastered in the existing exhaust fan hole, making good the damages, color washing etc as required and giving connection with required length ofpvc insulted and pvc sheathed 650/1100v grade 3 core round copper conductor flexible wire 12 90.4.8:charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 13 od25973/2025-2026:supply, conveyance, installation, testing and commissioning of 450 mm sweep wall mounting fan with metallic blades, blade covemounting fan with blades, covers,body,mounting brackets etc (orient electric tornado wall-ii 450mm wall fan chrome/crompton sstorm2 450mm 450 mm 3 blade wall fan/polar blustery wall mounted fan 450 mm 3 blade wall fan make) and giving connections etc as required. 14 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 15 1.17.3:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.3 x 1.5 sq.mm 16 1.17.6:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.6 x 1.5 sq. mm 17 1.17.12:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.3 x 2.5 sq. mm 18 1.17.21:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.3 x 4 sq. mm 19 1.31:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (for light plugs to be used in non residential buildings). 20 1.32:supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 21 90.10.1.2:supply & fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (rohs compliant )2 module moulded plastic box on surface 22 1.24.4:supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 23 od25233/2025-2026:supplying and fixing fp sheet steel enclosure on surface/ recess along with 40 amps 415 volts c curve four pole isolator complete 24 90.11.1.16:supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of mcb db including copper /brass bus bar, neutral link, earth bus and din rail suitable for fixing mcb/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover tpn vertical db with provision for fixing 4p mcb / isolator/ rccb/ rcbo as incomer and sp/ tp mcb as outgoing (ip 42/43) 25 90.11.1.10:supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of mcb db including copper /brass bus bar, neutral link, earth bus and din rail suitable for fixing mcb/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (ip 42/43) 26 2.3.2:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcbirccb/isolator8 way, double door 27 2.13.1:supplying and fixing following rating, four pole, 415 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.40 amps 28 2.13.2:supplying and fixing following rating, four pole, 415 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 amps 29 2.12.1:supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.40 amps 30 2.15.2:supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (rccb), having a sensitivity current upto 300 milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.40 amps 31 2.15.3:supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (rccb), having a sensitivity current upto 300 milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.63 amps 32 2.14.1:supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (rccb), having a sensitivity current upto 300 milliamperes in the existing mcb db complete with connections, testing and commissioning etc. as required.25 amps 33 2.10.1:supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole 34 2.10.4:supplying and fixing 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.triple pole 35 5.4:earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 36 od25227/2025-2026:supply, providing and fixing 2 x 25 mm x 3 mm g.i. strip test joint for earthing system 37 od25224/2025-2026:25 mm x 3 mm g.i. strip earth lead supplying and providing and fixing 25 mm x 3 mm g.i. strip earth lead from the test joint to the earth plate 38 90.16.1.3:supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 swg) 39 90.16.1.2:supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 swg) 40 90.16.5.2:supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 swg) 41 90.16.5.3:supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 swg) 42 od25228/2025-2026:supply and providing 25x6mm brass nut and bolt etc. as required. 43 od25951/2025-2026:supply and providing12x 3mm brass nut and bolt washersetc. as required. 44 od25231/2025-2026:12x3mm brass nut and boltsupply and providing 12x3mm brass nut and bolt etc. as required. 45 od25955/2025-2026:supply & installation of dust and vermin proof, three phase syntax meter board gs-mb-6535-std-nf and to fix kseb meters, fuse units, ct etc and to fix kseb meters, fuse units, ct etc as required including fixing it on wall, making good the damages colour washing etc. as required. 46 od25956/2025-2026:supplying and fixing 100a, hrc fuse with hrc fuse link with connections, in existing meter board 47 od25957/2025-2026:supplying and fixing 100 a, 2 way neutral links mounted on dmc/smc base with connections, in existing meter board 48 2.1.2:providing and fixing following capacity tp&n disconnector fuse switch unit inside the existing panel board with isi marked hrc fuses including drilling holes in cubicle panel, making connections, etc. as required.63 amp tp & n 49 90.14.1.2:fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type mv panel board comprising of the following components/ devices & complying to is 8623.fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of is 8623 (with latest amendments) using crca sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. crca sheet alone be used for the fabrication. angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. the measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.supply and fabrication of mv panel board using 1.6mm crca sheet, powder coated (excluding base frame) 50 od25961/2025-2026:supplying and fixing of following sizes of light class pvc conduit along with accessories in surface/ recess including cutting the wall/parapetand making good the same in case of recessed conduit as required as service pipe 51 od25235/2025-2026:supplying andprovidingm8 anchor bolt in wall/parapet for bimding support ofkseb servicemain etc as required. 52 90.12.5.40:supply & laying of one number pvc insulated and pvc sheathed armoured aluminium power cable of 1.1kv grade of the following sizes in the existing rcc/ hume / stone ware/ gi/ dwc pipe as required.4 core 10 sq mm 53 90.12.7.40:supply, laying and clamping of 1 no. pvc insulated and pvc sheathed armoured aluminium power cable, 1.1 kv grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp 54 90.12.7.41:supply, laying and clamping of 1 no. pvc insulated and pvc sheathed armoured aluminium power cable, 1.1 kv grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 55 9.1.32:supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.4 x 10 sq. mm (25mm) 56 9.1.33:supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.4 x 16 sq. mm (28mm) 57 90.12.10.2:supply & laying of dwc pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size 58 od25964/2025-2026:supply, threading ,laying and jointing of the 32 mm b class gi pipe with all required accessories in ground in he existing trench as protective covering to ug cable 59 od25945/2025-2026:charges for procurement, preparation and submission of application for availing single/three phase kseb service connection with necessary sketch, test and completion report, etc. including necessary liaison work as required.