tender for work of replacing four windows damaged due to termites and installing upvas and other necessary works in residence no. 84b located in mla niwas-1.- 1 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. of area 3 sq. metres and below( 15.12.1) 2 providing and fixing factory made upvc glazed/wire mesh windows/doors comprising of lead free upvc multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for series r1 and r2 profiles and 2.10 mm for series r3 and r4 profiles conforming to en: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per duly reinforced with galvanized mild steel section made of required shape & size as per ever required) of appropriate dimension, epdm gasket, hardware, ss 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide pa6 grade sleeve for fixing frame to finished wall as per is 1367 : part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to cpwd specification & direction of engineer-in-charge. section of steel reinforcement and cross sections of upvc profiles to be as per design approved by engineer-in-charge. wire mesh / glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to is: 3548 & is: 16231shall be paid separately. note:- structural design proof checked from a government engineering institute, to be provided by the manufacturer for : (i) sites with basic wind speed > 45 m/sec as per is 875 – part 3 (ii) sites with structure height more than 20m for all wind speedsthree track three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track, wool pile, nylon rollers with ss 304 body.using r2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (height upto 1.2 metre). (d.s.r-9.147.a4.1) 3 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. d.s.r no-15.56 4 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). d.s.r no-13.5.1 5 providing and applying white cement based putty of average thicknes 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. dsr no 13.80 6 distempring with 1st quality acrlyic distemper (redy mixed) having voc (volatile organic compound) content less than 50gram/litre, of approved brand and manufacture including applying additional coats whterever required to achieve even shade and colour. old work (one or more coats), dar-13.81.1, 7 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. dsr-1.1.18 please enable macros to view boq information