tender for clearing compound premises of shurbs, plants, jungles etc.by cutting and removing as directed (specific permission of engineer-in-charge prior to execution will be necessary).(payment to be made on area cleared) , anti-termite treatment to the outside of foundation with chemical emulsion by admixing loropyrofos emulsifiable concentrate (1% concentration) with water by weight, drilling 12mm. dia holes in rete or masonry apron at an interval of 300mm. to a depth,of 300mm or more as close to the plinth wall as possible and the chemical emulsionpumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of code i.s.-6313 (part-iii)-1981. , anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. the entire work is to be carried out as per specification of code i.s.-6313 (part-iii)-1981. the shutters are to be sprayed with emulsion. on both sides. all wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion.(payment will be made on the basis of outsidemeasurements of doors and windows) , repair to roof cracks with bitumen (vg-40) including cutting grooves and cleaning cracks, heating bitumen as directed and finished with sand blinding. (bitumen 1.687 kg/ sq.m, medium sand 0.6 cu.m/100 sq.m) (bitumen to be supplied by contractor) , supplying, fitting & fixing industrial troughed aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to is: 1254-1991 fitted and fixed with 75 mm & 25 mm self tapping screw , ep