bids are invited for repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; supply installation and commissioning of fixtures and devices with accessories; bidder -providing compactors made out of 0.8mm thick crca steel conforming to is: 513 gr. d each unit have 4 loading levelsformed by 3 nos . adjustable shelves . body units are bolted to under carriage. optimizer height form ground is 2080 mm (1980 body + 65 undercarriage +35 channel system) the body i /c shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. it involvestreatment consisting of hot water rinse. knock of degreasing, cold-water rinse, phosphating, coldwater rinse, passivation & dry off oven treatment. final finish consists of epoxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint is done for various physical & chemical properties as per is: 101. the material is the oven backed with a controlled temperature of 180 deg. c . to 200 deg . c. it is made of 0.8 mm thick crca steel conforming is is : 513 gr . d or dd its max load bearing capacity is 80 kg uniformly distributed per shelves are mounted on support bracket & shelf level can be adjusted at approx.… 25.4 pitch . there are 3 adjustable shelves per body given per body given 4 loading levels , if bi cradle pair is provided the under carrying is a welded frame made of hr sheet 3.15 mm thick conforming to is : 10748 suitably fabricated to take the loads based on configuration. a centralized locking arrangement is provided through locking stiffener mounted on to back of single last unit so that it gets locked on channels when all the units are brought together.