tender for improvement of uttaran privies at 5 etc seals garden lane in ward no 001-- 1 building works (b) dismantling, cutting chase, holes etc 10. stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 2 building works (g) wood and pvc works a. door window frame 4. supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15mm m.s. square tube. the two vertical door profiles are to be reinforced with 19mmx 19 mm m.s. square tube of 19 gauge, weather seal to be provided through out the frame. the door frame shall be fixed with the wall using 65/100 mm long m.s. screws through the frame by using p.v.c fasteners. a minimum of 4 nos of screws to be provided for each vertical member and minimum 2 nos for horizontal member etc. complete as per manufacturer?s specification and direction of engineer-in-charge 3 section 1. ------------building works (i) plastering, pointing etc. a. original works 1.plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[excluding cost of chipping over concrete surface] i) with 1:6 cement mortar (b) 20 mm thick plaster 4 building works (g) wood and pvc works a. door window frame 3. supplying, fitting and fixing fibre reinforced polymer (frp) composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of department of science and technology (dst) to safisfy is: 4020 door testing performance criteria (i) 66mm x 90mm 5 building works (g) wood and pvc works b. door window shutter 14. supplying, fitting & fixing fibre reinforced polymer (frp) composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of department of science and technology (dst) to satisfy is:4020 door testing performance criteria. in ground floor (i) 32 mm thick. (for upper floors refer to item h(4) also) 6 section 1. ------------building works (k) painting, vernishing etc a. original works 1 (b) priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (this item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 7 section 1. ------------building works (k) painting, vernishing etc a. original works2 (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) on timber or plastered surface :with super gloss (hi-gloss) -(iv) two coats (with any shade except white) 8 section 1. ------------building works (j)white wash, colour wash, distemper a. original works 3.colour washing with ella with a coat of white wash priming including cleaning and smoothening surface thoroughly :(i) internal (all floors) (b) two coats 9 building works(d) flooring..a. original works?(17)18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of engineer - in - charge to match with the existing work. [slurry for bedding @ 4.4 kg/sq.m and pointing @2.0 kg/sq.m](add extra for each addl, floor over the rate for item 22, 25, 26, 17, 20, 31, 32 & 15 of subhead a. (i) upto 4 th floor- rs. 12/-per sq.m ii) above 4th floor -rs. 16/- per sq.m 10 building works (d) flooring a. original works 35. supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (a) floor with sand cement mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/sq.m & joint filling using white cement slurry @0.20kg/sq.m. (b) area of each tile above 0.09 sq.m (i) coloured decorative. note: 2. add extra for each addl, floor over the rate for item 35 & 36 of subhead a. (i) upto 4 th floor-rs 5/ sq.m (i) above 4 th floor-rs 6.25/ sq.m 11 section(b) - sanitary and drainage works.(b)-(iii) water closets and urinals.a) original works.(1)supplying, fitting and fixing shallow water closet indian pattern (i.p.w.c.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).(iii) 450 mm long 12 section(b) - sanitary and drainage works.(b)-(ii) soil pipe and fittings.(a) original works.(31)supplying,fitting and fixing centrifugally cast (spun) iron (hubless) p trap conforming to i.s. 15905 / 2011 including all joining materials but excluding coupling and painting two coats to the exposed surface.(coupling & painting to be paid seperately).(iii) 100 mm 13 building works ( c ) brickworks,concrete works etc a. brick works16. 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 14 sanitary and drainage works (b)-(iv)inspection pit,septic tank,soak pit etc.8.supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.as per i.s-12592(m.d) (vii) 3 mt load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size cover: 450 mm x 50 mm frame: 540 mm x 100 mm opening: 370mm weight:46kg approx