supply of 4 pitch hinged steel belt type vertical chip conveyor (slat type)4 pitch hinged steel belt type vertical chip conveyor (slat type),4 pitch hinged steel belt type vertical chip conveyor (slat type) minimum thicknes s 6mm (slat & body)1) 1) pitch of chain-101.6 mm( slat hinges should be of pressing & forming only); 2 ) charge length -5.5mtr; 3)discharge hight-2.85mtr; 4)total effective length-8.5mtr. 5)angle of inclination-60degrees6. working width -343mm 7) over all width -470mm(horizontal conveyor end to end width should be not exceed 510mm) 8)width of the belt and the groove of the frame shou ld be given clearance at about minimum 10mm both sides. 9)speed of the conveyor -3m/min. 10 ) apron at every 5th pitch11. drive gear box worm reduction gear box to greaves make mod el:u-400 ratio 700:1. 12.)limit switch for overload protection with torque limiter13 spare ch ain assembly -17 mtrs. 14) electrical control panel. 15) rollers (5set) and foot rest shall be provided at the b/m of the conveyor to ensure proper and effort less movement. 16)10m m of hardoxe en8 material( plated) shall be provided to rail guide and it should be hardene d(hard pack construction). 17) lit pins should confirmed with is:549, rollers 45c8-is:1570en4 38 and hardness 35-42rc, seamless tube m s, is:2062, pin 40c8-is:5517 en 8, plates,side wings,bu sh, outer,inner and intermediate link 40c8-is:5517 and hardness24-27 rcen8 note: 1) the firm s hall provide relevant drawings for the spares used along with the supply. 2) the firm shall provide a warran ty/guarantee certificate for a period of 18 months from the date of supply or 12 months from the date of fit ment whichever is earlier. 3)the electrical motor used shall be with ie3 of bonfiglioli, ngef, bharat bij li, siemens, abb, crompton greaves or any isi certified makes only. make :m/8. miven mayfran c onveyors pvt. ltd. or m/s. universal conveyors. or m/s. toolings india corporation or m/s j r rao company. [ warranty period: 18 months