tender for estimate for supply, erection & commissioning of various electromechanical equipment like vt pumps, electric motors, starter panel and other allied accessories for flood protection works at rd 10990 sunder disty. in lift w/s (m) division, bhiwani. , supply erection & commissioning of 20 cs vt axial flow vertical turbine pumps of 980 rpm having static lift 6 mtr including ms delivery bends of min. 8 mm thickness with bituminous based paint inside & outside i/c flange welding, ht nut bolts complete in all respect as per site & as per approved technical specifications. , supply, erection & commissioning of solid shaft 100 hp, 380 v (+,- 10%),50 hz, 980 rpm, ie2, vertical flange mounted squirrel cage induction motor suitable for 20 cs vt pump with 6 mtr lift type complete in all respect as per technical specifications. , supply, erection and commissioning 100 hp panel fully automatic dry type starter with ats, 400 amp. mccb, contactors 300,200,110 amp., micro controller based protection relay cts including suitable capacitor bank having all types of protections i.e.uv/ov/ over current, phase loss/phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, separate auto on/off switch, separate relay for single phase protection etc. with all allied accessories with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter in all respect suitable for open fields operation of 1 no. motor of capacity 100 hp with a suitable of ms channel with canopy suitable operation height above the kachha open as per site requirement for 20 cs. vt pumps as per approved technical specifications. , supply, erection and commissioning of m.s delivery pipes 20 inch inner dia (equal to or less than 6 mtr length of pipe) and each pipe of 8 mm thickness both end welded with flange made ms plate as per approved specification & make. (including ht nut & bolt, rubber sheet 1/8/packing & other fitment accesso