supply of power distribution board.power distribution board.,supply and installation of ip54 protected glass fiber reinforced polycarbonate double insulat ed power distribution board of dimension 1200 x 1300 x 274mm. the enclosure must be of double insulate d, haloge free with high impact resistance of ik08 (5 joules) according to iec 62262. the enclosure should be made of uv resistant material, corrosion free. the enclosure material used should be self-extinguishing up to 960 deg with working temperature from -35 degc to +80 degc. interconnection between the enclosu res in the panels should be made with accessories which should maintain with same ip protection rating of i p65. the enclosure gasket materials shall be injected polyurethane. the enclosure should be made of the s ame polycarbonate materials only. incomer: 400a fp mccb 36ka - 1 no and 230v ac r,y,b indicating lamp , digital multi-function meter with 400/5a current transformer and outgoing: 100a tp mccb 36ka with 100 a neutral link - 7 nos & 63a fp mcb 10ka - 2 nos with 70a tp ac3 contactor control with 24hrs digital tim er with auto/manual selector switch and push buttons for manual operations .copper busbar rating of 400 a - 30 x 10 for all phases and neutral should be used -provision for termination of 185 sq.mm in incomer an d 35 sq.mm cables for 100a outgoing, 16 sq.mm cables for 63a outgoing and all mccb should have an adj ustable setting range (in) from 70% to 100%, each mccb should have extended rotary handle for easy oper ation. the manufacturer should submit all the test certificates in accordance with iec 61439, routine test r eport must be made with high voltage test, insulation resistance test, functional test. the wall mounting f rame should be made of hot dip galvanized materials. 1) acceptable make :cape/ famatel/hensel/ritt al/abb with following switch gear and terminals fixed in the junction box as per drawing e nclosed. 2)terminal block make: connect well/ elmex. 3)switch gears make sh