tender for idmt relay (p-111/easun) (make: schneider/siemens/areva/abb) (as per sample) , ampere meter digital type (make:- a.e, schneider, l&t ) as per sample , volt meter digital type (make:- a.e, schneider, l&t ) as per sample , female contact trolley side suitable for areva make ht panel. as per sample , spout insulator bus-bar side suitable for areva make ht panel (03 nos. in 01set) as per sample , bus-bar supporting insulator, as per sample , spray painting and writing work for h.t panel with enamel paint double coat (nerolac/asian make) with colour combination of existing paint of h.t panel , repairing, servicing, overhauling, & testing of 11kv ocbs/vcbs and their operational mechanism, including replacement of damaged/ burnt parts with new parts and re-fixing as required, after cleaning, oiling, greasing, alignment of breakers in panels, providing minor item like panel wiring etc.& other associated items, all selector switch & tnc switch (kaycee make) and push button etc. should be replace with new one. tnc switch operation from remote &local ht panel, indicators (led type lamp) wiring & other associated items as per required at site. cable end should be completely sealed by puff sealant or equivalent , cleaning of bus bars & coating with antioxidant, treatment on all the insulating parts/ metallic parts, tightening of all contacts in bus bar, chambers, replacement of minor items/parts like nut & bolts etc. complete as required including replacement of defective pt fuse with new one. coating with anti-oxidant treatment and tightening of all the contacts of 11kv cable end, cleaning of cts chambers, ptsconnections (pt panels) etc. complete as required of the 11kv panels , testing and calibration of protective relay (o/c and e/f) with secondary injection set including tripping through relay closing of 11kv breaker and circuit breaker time setting test with cb timing test kit and performance should be as per ieee c37.09, iec 62271-100 standards. also provide min