tender for kota stone flooring in cold swaging (barrel section) inside saf, kanpur; 1 roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0 kg of cement per sq. meter. 2 m & l for 25 mm thick cement concrete type b-0, 1:2:4 (12.50mm graded aggregate) 3 m & l for 25 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes 4 m&l for kota machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and treating the surface with beeswax polish 5 m&l for kota stone slab 20-25 mm thick in skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and treating the surface with beeswax polish. 6 dismantling rrcblocks/ms plate of any description or thickness in floor, appron etc, laid, bedded or pointed in any mortar 7 dismantling brick work masonary built in cement mortar all as directed 8 m&l for precast reinforced cement concrete block type b1 1:2:4 (20mm graded agreegate) masonry with solid blocks, exe. 10 cm in width and setting in cement mortar 1:4, complete 9 mild steel tmt bars 10 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips