tender for supply of cnc lathe machine for mechanical cad , mechanical (cad) , cnc lathe machine specifications: capacity maximum turning dia. ø125 - ø200 mm swing over bed ø 225 - ø 300 mm maximum turning length 200 - 280 mm slides cross (x axis) travel 150 - 300 mm longitudinal (z axis) travel 200 - 280 mm rapid feed (x axis) 5 - 20 m/min rapid feed (z axis) 5 - 20 m/min accuracy positioning (x & z axis) ±0.008 mm repeatability (x & z axis) ±0.01 mm main spindle spindle nose a2-3 or a2-4 -- max. bar capacity ø30 - ø 32 mm chuck size ø 165x3jaw mm speed range 50-3500 rpm spindle motor (servo motor) 3.7 / 5.5 kw tooling arrangement no. of tools 6 no. tool size 20x20 mm max. boring bar capacity ø 25 mm with standard accessories .terms and conditions for turning machine • the controller system should be fanuc controller. • a voltage stabilizer and transformer must be included in the standard accessories. • video images on cd / digital media, along with hard copies of literature containing photographs and drawings explaining the technical features, shall be enclosed. • a sliding door shall be provided with sufficient transparent windows to enable viewing of the machining process and to prevent chip/coolant splash. • manual operation of turret indexing through push buttons shall be provided, in addition to program control. • coolant delivery shall be ensured up to the tool tip in all tool holders. • all electrical and electronic control cabinets and panels shall be dust- and vermin-proof. • the supplier must submit a detailed list of warranty information for all components. • detailed list of all alarms and indications provided on the machine shall be submitted by the supplier. • the paint used on the machine shall be oil and coolant-resistant, and shall not peel off or mix with the coolant.